Abstract
Historical development of the rock mass rating (RMR) system, first developed and later reviewed by Bieniawski, and contributed by other researchers, is presented. The advanced version of RMR classification and the scope of its application are specified.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
Z. T. Bieniawski, “Engineering classification of jointed rock masses,” Trans. South African Institute Civil Engineering, 15 (1973).
N. R. Barton, R. Lien, and I. Lunde, “Engineering classification of rock masses for the design of tunnel supports,” Rock Mechanics, 6, No. 4 (1974).
E. Hoek, “Strength of the rock and rock masses,” ISRM News Journal, 2, No. 2 (1995).
A. Palmström, “RMi-a rock mass characterization system for rock engineering purposes,” PhD Thesis, Oslo University, Norway (1995).
A. Palmström, “On classification systems,” in: Proceedings of Workshop on Reliablity of Classification Systems a Part of the International Conference “GeoEng-2000”, Melbourne (2000).
R. Ulusay and H. Sonmez, Engineering Properties of Rock Masses, [in Turkish], The Chamber of Geology Engineering of Turkey, Ankara, Turkey (2002).
H. Lauffer, “Gebirgsklassifizierung für den stullenbau,” Geologie und Bauwesen, 24 (1958).
J. A. Franklin and R. Chandra, “The slake durability test,” Int. J. Rock Mech. & Min. Sci., No. 9 (1972).
H. J. Oliver, “Swelling properties and other related mechanical parameters of Karro strata as encountered in the orange-fish tunnel,” in: Proceedings of the 15th Annual Congress of Geological Society of South Africa (1973).
Z. T. Bieniawski, “Geomechanics classification of rock masses and its application in tunneling,” in: Proceedings of the 3rd Conference of International Society of Rock Mechanics, Denver (1974).
Z. T. Bieniawski, “Rock mass classification in rock engineering,” in: Proceedings of the Symposium on Exploration for Rock Engineering, Cape Town, Balkema (1976).
Z. T. Bieniawski, “The geomechanics classifications in rock engineering applications,” in: Proceedings of the 4th Congress on Rock Mechanics, ISRM, Montreux (1979).
Z. T. Bieniawski, “Rock mass classification as a design aid in tunneling,” Tunnels and Tunelling, July (1988).
Z. T. Bieniawski, Engineering Rock Mass Classifications, John Wiley and Sons (1989).
ISRM. The Complete ISRM Suggested Methods for Rock Characterization, Testing and Monitoring: 1974–2006. Suggested Methods Prepared by the Commission on Testing Methods, International Society for Rock Mechanics, R. Ulusay and J. A. Hudson (Eds.), Compilation Arranged by the ISRM Turkish National Group, Ankara, Turkey (2007).
J. S. Schrier, “The block punch index test,” Bul. Int. Assoc. Eng. Geology, 38 (1988).
R. Ulusay and C. Gokceoglu, “The modified block punch index test,” Can. Geotechn. J., 34, No. 6 (1997).
R. Ulusay and C. Gokceoglu, “An experimental study on the size effect in block punch index test and its general usefulness,” Int. J. of Rock Mech. and Min. Sci., 35, Nos. 4 and 5 (in NARMS’98-ISRM International Symposium, Cancun-Mexico) (1998).
R. Ulusay and C. Gokceoglu, “A new test procedure for the determination of the block punch index and its possible uses in rock engineering,” ISRM News J., 6, No. 1 (1999).
R. Ulusay, C. Gokceoglu, and S. Sulukcu, “Draft ISRM suggested method for determining block punch strength index (BPI),” Int. J. Rock Mech. and Min. Sci., 38 (2001).
S. Sulukcu and R. Ulusay, “Evaluation of the block punch index test with particular reference to the size effect, failure mechanism and its effectiveness in predicting rock strength,” Int. J. Rock Mech. and Min. Sci., 38 (2001).
D. H. Laubscher, “Geomechanics classification of jointed rock masses-mining applications,” Trans. Inst. Min. Met. (1977).
D. H. Laubscher, “Design aspects and effectiveness of support system in different mining conditions,” Trans. Inst. Min. Met. (1984).
E. Unal, R. Ulusay, and I. Ozkan, Rock Engineering Evaluations and Rock Mass Classification at Beypazari Trone Site, METU Project No: 97-03-05-02-02 (1997a).
E. Unal, R. Ulusay, and I. Ozkan, Rock Engineering Evaluations and Rock Mass Classification at Beypazari Trone Field: Borehole TS-3_Site, Project No: 97-03-05-01-06, METU Ankara (1997b).
B. Singh and R. K. Goel, Rock Mass Classification: A Practical Approach in Civil Engineering, Elsevier (1999).
H. Lauffer, “Zur gebirgsklassifizierung bei frasvortrieben,” Felsbau, 6, No. 3 (1988).
R. K. Goel and J. L. Jethwa, “Prediction on support pressure using RMR classification,” in: Proceedings of the Indian Geotechnical Conference, Surat, India (1991).
Z. T. Bieniawski, “Determining rock mass deformability: Experience from case histories,” Int. J. Rock Mech. Min. Sci., 15 (1978).
J. L. Sefarim and J. P. Pereira, “Consideration of the geomechanics classification of Bieniawski,” in: Proceedings of the International Symposium on Engineering Geology and Underground Constructions, Lisbon, Portugal, 1 (1983).
G. A. Nicholson and Z. T. Bieniawski, “A non-linear deformation modulus based on rock mass classification,” Int. J. of Min. and Geol. Eng., No. 8 (1990).
R. Ulusay, “Geotechnical evaluations and deterministic design consideration from pit-wall slopes at Eskihisar (Yatagan-Mugla) strip coal mine,” Ph. D. Thesis, METU, Geological Engineering Dept. Ankara, Turkey (1991).
R. Ulusay and C. Aksoy, “Assessment of failure mechanism of highwall slope under spoil pile loadings at a coal mine,” Eng. Geology, 38 (1994).
C. O. Aksoy, T. Onargan, T. Gungor, K. Kucuk, and M. Kun, The Evaluation of Excavation and Support System between Goztepe and F. Altay Stations of Second Stage of Izmir Metro Project, DEUEF, DEU-MAG, Izmir (2006).
T. Onargan and C. O. Aksoy, Report on the Evaluation of the Excavation of Type Second Station Tunnel and Application in Project on the Second Stage of Izmir Metro Project, DEUEF, Izmir (2006).
M. K. Verman, “Rock mass-tunnel support interaction analysis,” Ph. D. Thesis, University of Roorkee, Roorkee, India (1993).
E. Hoek and E. T. Brown, Underground Excavations in Rock, Inst. of Mining and Metallurgy, Stephen Austin and Sons Ltd., London, 106 (1980).
E. Unal and I. Ozkan, “Determination of classification parameters for clay-bearing and stratified rock mass,” in: Proceedings of the 9th International Conference on Ground Control in Mining, West Virginia University, Morgantown (1990).
E. Unal, Modified Rock Mass Classification: M-RMR system, Milestone in Rock Engineering, The Bieniawski Jubilee Collection, Balkema, Rotterdam (1996).
R. N. Singh and D. R. Gahrooee, “Application of rock mass weakening coefficient for stability assessment of slopes in heavily jointed rock mass,” Int. J. of Surface Mining, Reclamation and Environment, No. 3 (1989).
R. Ulusay, I. Ozkan, and E. Unal, “Characterization of weak, stratified and clay-bearing rock masses for engineering applications,” in: Proceedings of the Fractured and Jointed Rock Masses Conference, L.R. Mayer, N.G.W. Cook, R.E. Goodman and C.F. Trans (Eds.), Lake Tahoe, California (1995).
H. Sonmez and R. Ulusay, “Modification to the geological strength index (GSI) and their applicability to stability of slopes,” Int. J. of Rock Mechanics and Mining Science, 36, No. 6 (1999).
E. Unal, I. Ozkan, and R. Ulusay, “Characterization of weak rock, stratified and clay-bearing rock masses,” in: ISRM Symposium:EUROCK’92 Rock Characterization, Chester, UK, J.A. Hudson (Ed.), British Geotechnical Society, London (1992).
Author information
Authors and Affiliations
Corresponding author
Additional information
__________
Translated from Fiziko-Tekhnicheskie Problemy Razrabotki Poleznykh Iskopaemykh, No. 1, pp. 56–68, January–February, 2008.
Rights and permissions
About this article
Cite this article
Aksoy, C.O. Review of rock mass rating classification: Historical developments, applications, and restrictions. J Min Sci 44, 51–63 (2008). https://doi.org/10.1007/s10913-008-0005-2
Received:
Issue Date:
DOI: https://doi.org/10.1007/s10913-008-0005-2