Abstract
Studying initiation and propagation of hydraulic fractures is carried out based on the hypersingular boundary element method.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
Yu. P. Zheltov and S. A. Khristianovich, “On the hydraulic fracturing of an oil bed,” Izv. AN SSSR, OTN, No. 5 (1955).
B. C. Haimson and C. Fairhurst, “Initiation and extension of hydraulic fractures in rocks,” Soc. Petrol. Eng. J., 7 (1967).
J. Geertsma and R. Haafkens, “A comparison of the theories predicting width and extent of vertical hydraulically induced fractures,” J. Energy Reservoir Technology, 101 (1979).
K. G. Nolte and M. B. Smith, “Interpretation of fracturing pressures,” J. Petrol. Technol., Sept. (1981).
S. Nemat-Nasser, “Hydraulic fracturing and geothermal energy,” CIP (1983).
N. R. Warpinski, “Measurement of width and pressure in a propagating hydraulic fracture,” Soc. Petrol. Eng. J., Feb. (1985).
M. P. Cleary, D. T. Barr, and R. M. Willis, “Enhancement of real-time hydraulic fracturing models with full 3-D simulator,” in: SPE Gas Technology Symposium, Dallas, TX (1988).
L. L. Lacy, “Comparison of hydraulic fracture orientation techniques,” SPE Production & Facilities, 2 (1987).
R. J. Pine and D. A. C. Nicol, “Analytical and numerical modeling of high pressure fluid-rock mechanical interaction in HDR geothermal energy reservoirs,” in: Comprehensive Rock Engineering: Principles, Practice&Projects, J. Hudson (Ed.), 5 (1993).
F. Guo, J. R. Morgenstern, and J. D. Scott, “Interpretation of hydraulic fracturing breakdown pressure,” Int. J. Rock Mech., 30, No. 6 (1993).
C. Atkinson and M. Thiercelin, “The interaction between the wellbore and pressure-induced fractures,” Int. J. Fracture, 59 (1993).
S. A. Holditch, “Developing data sets for 3D fracture propagation models,” SPE Production & Facilities, 9, No. 4 (1994).
C. Atkinson and M. Thiercelin, “Pressurization of a fractured wellbore,” Int. J. Fracture, 83 (1997).
L. Raymond, et al., “Improving results of coalbed methane development strategies by integrating geomechanics and hydraulic fracturing technologies,” SPE Asia Pacific Oil and Gas Conference and Exhibition, Melbourne, Australia (2002).
R. W. Veatch, Jr., “Overview of current hydraulic fracturing design and treatment technology. Part 2,” Journal of Petroleum Technology, May (1983).
M. M. Hossain, et al., “Hydraulic fracture initiation and propagation: roles of wellbore trajectory, perforation and stress regimes,” J. Petrol. Eng., 27 (2000).
M. M. Rahman, et al., “An integrated model multiobjective design optimization of hydraulic fracturing,” J. Petrol. Eng., 31 (2001).
V. N. Odintsev, “Theoretical estimate of influence exerted by borehole on the permeability of gas-saturated seam,” Fiz.-Tekh. Probl. Razrab. Polezn. Iskop., No. 6 (2001).
S. V. Slastunov, G. G. Karkashadze, and K. S. Kolikov, “Analytical model for hydraulic disjointing of coal seam,” Fiz.-Tekh. Probl. Razrab. Polezn. Iskop., No. 6 (2001).
A. G. Olovyanny, “Analytical model for hydraulic disjointing of coal seam,” Fiz.-Tekh. Probl. Razrab. Polezn. Iskop., No. 1 (2005).
A. A. Nasedkina and V. N. Trufanov, “Numerical modeling of hydrofracturing in a multilayer coal seam,” Fiz.-Tekh. Probl. Razrab. Polezn. Iskop., No. 1 (2006).
Yu. P. Zheltov, Mechanics of the Oil-and-Gas-bearing Reservoir [in Russian], Nedra, Moscow (1975).
C. Fairhurst, “Stress estimation in rock: a brief history and review,” Int. J. Rock Mechanics and Mining Sci., 40 (2003).
J. L. Gidley, et al. (Eds.), “Recent advances in hydraulic fracturing,” SPE Monograph (1989).
B. C. Haimson and F. H. Cornet, “ISRM suggested methods for rock stress estimation. Part 3: Hydraulic fracturing (HF) and/or hydraulic testing of pre-existing fractures (HTPF),” Int. J. Rock Mechanics and Mining Sci., 40 (2003).
L. S. Kolodko and P. A. Martynyuk, “On development and coalescence of two pre-parallel rectilinear cracks,” Fiz.-Tekh. Probl. Razrab. Polezn. Iskop., No. 4 (1989).
T. E. Alekseeva and P. A. Martynyuk, “Crack emergence trajectories at a free surface,” Fiz.-Tekh. Probl. Razrab. Polezn. Iskop., No. 2 (1991).
P. A. Martynyuk and E. N. Sher, “Development of a crack close to a circular opening with an external field of compressive stresses,” Fiz.-Tekh. Probl. Razrab. Polezn. Iskop., No. 6 (1996).
P. A. Martynyuk, “Trajectory of crack formed by hydraulic fracturing near the contact of productive stratum with enclosing rocks,” Fiz.-Tekh. Probl. Razrab. Polezn. Iskop., No. 4 (2002).
E. N. Mastrojannis, L. Keer, and T. Mura, “Growth of planar cracks induced by hydraulic,” Int. J. Num. Meth. Eng., 15 (1980).
D. A. Mendelsohn, “A review of hydraulic fracture modeling. Part I: General concepts, 2D models, motivation for 3D modeling,” J. Energy Res. Tech., 106 (1984).
S. Mogilevskaya, et al., “Growth of pressure-induced fractures in the vicinity of a wellbore,” Int. J. Fracture, 104 (2000).
V. Koshelev and A. Ghassemi, “Numerical modeling of stress distribution and crack trajectory near a fault or a natural fracture,” in: Soil and Rock America 2003; 30th US Rock Mechanics Symposium, Cambridge, Mass. Eds.: P. J. Culligan, et al. (2003).
V. Koshelev and A. Ghassemi, “Hydraulic fracture propagation near a natural discontinuity,” in: Proceedings of the 28th Workshop on Geothermal Reservoir Engineering, Stanford University, Stanford, California (2003).
O. P. Alekseenko and A. M. Vaisman, “Certain aspects of a two-dimensional problem on the hydraulic fracturing of an elastic medium,” Fiz.-Tekh. Probl. Razrab. Polezn. Iskop., No. 3 (1999).
M. P. Savruk, 2D Elasticity Problems for Bodies with Cracks [in Russian], Naukova Dumka, Kiev (1981).
A. M. Lin’kov, Complex Method of Boundary Integral Equations of Elasticity Theory [in Russian], Nauka, Saint Petersburg (1999).
A. A. Dobroskok, “Numerical modeling of the constitutive relations for a medium with cracks and contact interactions,” Doctoral Thesis [in Russian], IPMash, Saint Petersburg (2002).
A. Dobroskok, “On a new method for iterative calculation of crack trajectory,” Int. J. Fracture, 111 (2001).
E. Detournay and R. Carbonell, “Fracture mechanics analysis of the breakdown process in minifrac or leak-off tests,” in: Proceedings EUROCK 94 Symposium, Delft (1994).
U. Mourakami (Ed.), Stress Intensity Factors. Guide [Russian translation], 1, Mir, Moscow (1985).
N. M. Osipenko, “Studying the mechanism of brittle fracture in jointy rocks,” Candidate’s Thesis [in Russian], IFZ AN SSSR, Moscow (1972).
V. N. Nikolaevskii, “Review: Earth crust, dilatancy and earthquakes,” in: Mechanics of the Earthquake Focus [Russian translation], J. Rice (Ed.), Mir, Moscow (1982).
R. Cotterell and J. R. Rice, “Slightly curved or kinked cracks,” Int. J. Fracture, 16, No. 2 (1980).
A. M. Lin’kov and A. A. Dobroskok, “Numerical modeling of rock deformation under compression,” Fiz.-Tekh. Probl. Razrab. Polezn. Iskop., No. 4 (2001).
A. A. Dobroskok, A. M. Linkov, L. Myer, and J.-C. Roegiers, “On a new approach in micromechanics of solids and rocks,” in: Rock Mechanics in the National Interest, Proceedings of the 38th US Rock Mechanics Symposium, Tinucci & Heasley (Eds), Swets&Zeitlinger Lisse (2001).
A. A. Dobroskok, A. Ghassemi, and A. M. Linkov, “Extended structural criterion for numerical simulation of crack propagation under compressive loads,” Int. J. Fracture, 133 (2005).
J. C. Radon, P. S. Leevers, and L. E. Culver, “Fracture toughness of PMMA under biaxial stress,” Fracture, 8 (1977).
S. G. Mogilevskaya, “Numerical modeling of 2D smooth crack growth,” Int. J. Fracture, 87 (1997).
Author information
Authors and Affiliations
Additional information
__________
Translated from Fiziko-Tekhnicheskie Problemy Razrabotki Poleznykh Iskopaemykh, No. 1, pp. 45–63, January–February, 2007.
Rights and permissions
About this article
Cite this article
Zubkov, V.V., Koshelev, V.F. & Lin’kov, A.M. Numerical modeling of hydraulic fracture initiation and development. J Min Sci 43, 40–56 (2007). https://doi.org/10.1007/s10913-007-0006-6
Received:
Issue Date:
DOI: https://doi.org/10.1007/s10913-007-0006-6