Abstract
The purpose of this work is to identify some criteria for the evaluation of flying and handling qualities of small scale Unmanned Aerial Vehicles (mini-UAVs). A possible solution for the evaluation of handling qualities is based on the minimization of cumulative cross track error (estimated along a sequence of waypoints) at constant altitude and speed, assuming gradual variation of the control inputs (throttle, elevator and ailerons). A complete parametric analysis of vehicle open loop dynamics is performed for a demonstrative mini-UAV. The flying and handling qualities are assessed implementing the selected platform in a full state flight simulator including a realistic autonomous navigation and control system. Different target paths are considered and a parametric study based on the minimization of the cross track error is presented. A section of conclusions summarizes the key results and presents suggestions for future work.
Article PDF
Similar content being viewed by others
Explore related subjects
Discover the latest articles, news and stories from top researchers in related subjects.Avoid common mistakes on your manuscript.
References
Anonymous: Flying Qualities of Piloted Aircraft MIL-STD-1797 A (1995)
Anonymous: Military Specifications, Flying Qualities of Piloted Aircraft MIL-F-8785C (1980)
Anonymous: RPV Design Criteria Technical Report AFFDL-TR-76-T25. Rockwell International Cooperation, Columbus, OH (1976)
Capello, E., Guglieri, G., Quagliotti, F.: A Software Tool Mission Design and Autopilot Integration: an Application to Micro Aerial Vehicles. EUROSIW. Edinburgh, Scotland (2008)
Capello, E., Guglieri, G., Quagliotti, F.: UAVs and Simulation: an experience on MAVs. Aircraft Engineering and Aerospace Technology (2009)
Cook, M.: Flight Dynamics Principles. Butterworth Heinemann (2007)
Donlan, J.: An Interim Report on the Stability and Control of Tailless airplanes. NACA Technical Report 796 (1944)
Foster, T., Bowman, W.: Dynamic Stability and Handling Qualities of Small Unmanned Aerial Vehicles. 43rd AIAA Aerospace Sciences Meeting and Exhibit. Reno, Nevada (2005)
Gilruth, R.: Requirements for Satisfactory Flying Qualities of Airplanes. Langly Field, VA: National Advisory Commitee for Aeronautics Report 155 (1941)
Guglieri, G., Pralio, B., Quagliotti, F.: Flight control system design for a micro aerial vehicle. Aircraft Eng. Aero. Tech. 78, 87–97 (2006)
Hodgkinson, J.: Aircraft Handling Qualities. AIAA, Washington DC (1999)
Holmberg, J., King, D., Leonard, J., Cotting, C.: Flying qualities application and design standards for unmanned air vehicles. Proceedings of 26th Atmospheric Flight Mechanics Conference and Exhibit. Honolulu, Hawaii (2008)
Jones, R.: Notes on the Stability and Control of Tailless Airplanes. NACA Technical Report 837 (1941)
Marguerettaz, P., Sartori, D., Guglieri, G., Quagliotti, F.: Design and Development of Man-Portable Unmanned Aerial System for Alpine Surveillance Missions. UAS International 2010. Parigi, Francia (2010)
Micropilot Inc: Micropilot Autopilot Installation and Operation (2010)
Pratt, R.: Flight Control Systems: practical issues in design and implementation. IEEE Control Engineering Series 57 (2000)
Williams, W.: UAV Handling Qualities... You must be Joking. Aerospace Sciences Cooperation Pty LTd (2003)
Williams, W., Harris, M.: The Challenges of Flight Testing Unmanned Air Vehicle. Systems Engineering Test and Evaluation Conference. Sydney, Australia (2002)
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Capello, E., Guglieri, G., Marguerettaz, P. et al. Preliminary assessment of flying and handling qualities for mini-UAVs. J Intell Robot Syst 65, 43–61 (2012). https://doi.org/10.1007/s10846-011-9565-5
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10846-011-9565-5