Abstract
Proactivity in maintenance, which is mainly materialized by degradation-based anticipation, becomes essential to avoid failure situation with negative impact on product and/or system conditions. It leads to make emerging the E-maintenance philosophy to move from “fail and fix” maintenance practices to “predict and prevent” strategies. Within these new strategies, the anticipation action is fully supported by prognosis business process. Indeed it analyses the degradation impact on the component itself but also on the global performances of the production system in order to predict future failures of the system and investigate (future maintenance) actions. However, only few research works focuses on generic and scalable prognostic approach. Existing methods are generally restricted on component view and for solving the failure prediction issue. Consequently, the contribution presented in this paper aims at developing a global formalization of the generic prognosis business process. This generic process can be used after, from an instantiation procedure, to develop specific prognosis processes related to particular application such as shown in this paper with the case of E-maintenance platform developed within DYNAMITE Project.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
Bangemann T., Reboul D., Scymanski J., Thomesse J.-P., Zerhouni N. (2006) PROTEUS - An integration platform for distributed maintenance systems. Computers in Industry, Special issue on e-maintenance 57(6): 539–551
Blann, D. R., (2003). Reliability as a strategic initiative: To improve manufacturing capacity, throughput and profitability. Asset Management & Maintenance Journal, 16(2). http://www.marshallinstitute.com/inc/eng/justforyou/Body/articles/reliability_str_init.pdf.
Byington, C. S., Roemer, M. J.,& Galie, T. (2002). Prognostic enhancements to diagnostic systems for improved condition-based maintenance. In IEEE Aerospace Conference Proceedings.
DeSimone, L. D. & Popoff, F., with The WBCSD (1997). Eco-Efficiency. MIT Press.
Farrar C.R., Lieven N.A.J. (2007) Damage prognosis: The future of structural health monitoring. Philosophical transactions of the Royal Society A 365: 623–632
Iung B. (2003) From remote maintenance to MAS-Based E-maintenance of an industrial process. International Journal of Intelligent Manufacturing 14(1): 59–82
Iung B., Crespo Marquez A. (2006) Special issue on e-maintenance. Computers in Industry 57(6): 473–606
Iung B., Levrat E., Thomas E. (2007) ‘Odds Algorithm’-based opportunistic maintenance task execution for preserving product conditions. Annals of the CIRP - Manufacturing Technology 56(1): 13–16
Jardine A., Lin D., Banjevic D. (2006) A review on machinery diagnostics and prognostics implementing condition-based maintenance. Mechanical Systems and Signal Processing 20(7): 1483–1510
Lebold, M., & Thurston, M. (2001). Open standards for condition-based maintenance and prognostic systems. In 5th Annual Maintenance and Reliability Conference (MARCON 2001), Gatlinburg, USA.
Lee J. (1998) Teleservice engineering in manufacturing: Challenges and opportunities. International Journal of Machine Tools and Manufacture 38(8): 901–910
Lee J., Ni J., Djurdjanovic D., Qiu H., Liao H. (2006) Intelligent prognostics tools and e-maintenance. Computers in Industry, Special issue on e-maintenance 57(6): 476–489
Léger J.B., Morel G. (2001) Integration of maintenance in the enterprise: Towards an enterprise modeling-based framework compliant with proactive maintenance strategy. Production Planning and Control 12(2): 176–187
Levrat E., Iung B., Crespo Marquez A. (2008) E-maintenance: Review and conceptual framework. Production Planning and Control 19(4): 408–429
Muller A., Crespo Marquez A., Iung B. (2008b) On the concept of e-maintenance: Review and current research. Reliability Engineering & System Safety 93(8): 1165–1187
Muller A., Suhner M.C., Iung B. (2008a) Formalization of a new prognosis model for supporting proactive maintenance implementation on industrial system. Reliability Engineering and System Safety 93(2): 234–253
Panetto, H. (2005). Interoperability of enterprise software and applications: Workshops of the INTEROP-ESA International Conference EI2N, WSI, ISIDI and IEHENA 2005. Hermes Sciences Publishing.
Provan, G., (2003). Prognosis and condition-based monitoring : An open systems architecture. In: 5th IFAC Symposium on Fault Detection, Supervision and Safety of Technical Processes (pp. 57–62). Washington, USA.
Takata S., Kimura F., van Houten F.J.A.M., Westkämper E., Shpitalni M., Ceglarek D., Lee J. (2004) Maintenance: Changing role in life cycle management. Annals of the CIRP 53(2): 643–656
Thomas, E., Levrat, E., Iung, B., & Monnin, M. (2006). ‘Odds algorithm’-based opportunity-triggered preventive maintenance with production policy. In 6th IFAC Symposium on Fault Detection, Supervision and Safety of Technical Processes, China, pp. 835–840.
Van Houten F.J.A.M., Tomiyama T., Salomons O.W. (1998) Product modelling for model-based maintenance. Annals of the CIRP 47(1): 123–129
Wang H. (2002) A survey of maintenance policies of deteriorating systems. European Journal of Operational Research 139: 469–489
Wang, P., & Vachtsevanos, G. (1999). Fault prognosis using dynamic wavelet neural networks. AAAI Spring Symposium in Equipment Maintenance Service and Support, Polo Alto, USA.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Voisin, A., Levrat, E., Cocheteux, P. et al. Generic prognosis model for proactive maintenance decision support: application to pre-industrial e-maintenance test bed. J Intell Manuf 21, 177–193 (2010). https://doi.org/10.1007/s10845-008-0196-z
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10845-008-0196-z