Abstract
The presence of moisture in building envelopes can have many causes and may lead to deterioration of useful thermophysical characteristics of the materials, to weakening of the building structure, and to facilitating growth of mold. The International Standard ISO 13788 establishes a calculation procedure for the determination of hygrometric characteristics of building components and materials, assuming that the influence of moisture content on the thermal field across walls, ceilings, and roofs may be neglected. However, condensed water increases the effective thermal conductivity of building materials, thus modifying the temperature profiles across the building envelope. This effect is analogous to the one due to the material aging. In this paper, the authors show the results of effective thermal-conductivity measurements in some commonly adopted building materials as a function of moisture content, in order to assess the potential significance of interstitial condensation on thermal losses and to verify if the maximum allowed moisture content reported is useful to prevent the decay of the thermal properties of building materials.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
Abbreviations
- A :
-
Area (m2)
- I S :
-
Significance index
- k :
-
Coverage factor
- L :
-
Thickness (m)
- m :
-
Mass (kg)
- T :
-
Temperature (°C)
- u :
-
Standard uncertainty
- λ:
-
Thermal conductivity (W · m−1 · K−1)
- ρ :
-
Density of the material (kg · m−3)
- i:
-
Lower comparative structure
- limit:
-
Limit value
- s:
-
Upper comparative structure
- w:
-
Liquid water
- ref:
-
Reference value
- RM:
-
Reference material
- sample:
-
Sample
References
Klamer M., Morsing E., Husemoen T.: Int. Biodeterior. Biodegrad. 54, 277 (2004)
Fisk W.J., Lei-Gomez Q., Mendell M.J.: Indoor Air 17, 284 (2007)
ISO: International Standard ISO 13788. International Standardization Organization, Geneva (2001)
ISO: International Standard 7345. International Standardization Organization, Geneva (1987)
ISO: International Standard ISO 9346. International Standardization Organization, Geneva (2007)
UNI: Italian National Standard UNI 10351. Ente Nazionale Italiano di Unificazione, Milano (1994)
UNI: Italian National Standard UNI 10355. Ente Nazionale Italiano di Unificazione, Milano (1994)
F. Ochs, W. Heidemann, H. Müller-Steinhagen, in Proceedings of Ecostock 2006 (Richard Stockton College of New Jersey, Galloway, NJ, 2006), p. 1
F. Domìnguez-Muñoz, B. Anderson, J.M. Cejudo-Lopez, A. Carrillo-Andrés, in Proceedings of 11th International IBPSA Conference, Glasgow, Scotland, 2009, p. 1008.
ISO: International Standard ISO 10456. International Standardization Organization, Geneva (2007)
P. Baggio, C. Bonacina, M. Campanale, L. Moro, in Proceedings of the 57° Congresso Nazionale ATI—Associazione Termotecnica Italiana, Pisa, Italy, 2002 (in Italian)
Frattolillo A., Giovinco G., Mascolo M.C., Vitale A.: Exp. Therm. Fluid Sci. 30, 27 (2005)
D.J. Gawin, J. Kosny, K. Wilkes, in Proceedings of ASHRAE Thermal IX Conference, Clearwater Beach, FL, 2004
L. Mazzarella, M. Motta, M. Valentini, “Determinazione della conduttività e effusività termica per materiali umidi con il metodo TPS,” in Proceedings of the XIX UIT National Heat Transfer Conference, Modena, Italy, 2001, pp. 519–526 (in Italian)
dos Santos W.N.: J. Mater. Sci. 35, 3977 (2000)
F. Ochs, H. Müller-Steinhagen, in Proceedings of NATO Advanced Study Institute on Thermal Energy Storage for Sustainable Energy Consumption, TESSEC, Izmir, Cesme, 2005
J. Zach, J. Brozovsky, I. Sedlarova, in Proceedings of the 9th International Conference on NDT of Art, Jerusalem, Israel, 2008
Meukam P., Jannot Y., Noumowe A., Kofane T.C.: Constr. Build. Mater. 18, 437 (2004)
Buonanno G., Carotenuto A., Giovinco G., Massarotti N.: ASME J. Heat Transfer 125, 693 (2003)
G. Buonanno, A. Carotenuto, G. Giovinco, N. Massarotti, in Proceedings of HEFAT2003 2nd International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics, Victoria Falls, Zambia, 2003
Khan M.I.: Build. Environ. 37, 607 (2002)
dos Santos W.N.: J. Eur. Ceram. Soc. 23, 745 (2003)
ISO/IEC: Guide 98-1. International Standardization Organization, Geneva (2009)
G. Alfano, F.R. d’Ambrosio, G. Riccio, in Edilizia e Ambiente, ed. by A. Peretti, P. Simonetti (Arti Grafiche Padovane, Padova, 1998), p. 103 (in Italian)
H.M. Kunzel, Ph.D. Thesis (Fraunhofer Institute of Building Physics, Germany, 1995)
X.F. Hu, T.T. Lie, G.M. Polomark, J.W. MacLaurin, “Internal Report No. 643” (National Research Council Canada, Institute for Research in Construction, 1993)
W. Simpson, A. Ten Wolde, in Wood Handbook: Wood as an Engineering Material, Gen. Tech. Rep. FPL-GTR-113, ed. by Forest Products Laboratory (USDA Forest Service Forest Products Laboratory, Madison, WI, 1999), p. 11
EA-2/03: EA Interlaboratory Comparison (previously EAL-P7) (1996)
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Dell’Isola, M., d’Ambrosio Alfano, F.R., Giovinco, G. et al. Experimental Analysis of Thermal Conductivity for Building Materials Depending on Moisture Content. Int J Thermophys 33, 1674–1685 (2012). https://doi.org/10.1007/s10765-012-1215-z
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10765-012-1215-z