Abstract
The method of gamma-raying the samples by a narrow beam of gamma radiation for cesium-137 isotope is used to investigate the density of five liquid alloys of a tin—lead system (17.64, 25.35, 25.61, 26.07, and 33.88 at.% Pb) in the temperature range from 293 to 1040 K with an error of 0.20–0.25%. Approximation dependences are obtained for the density of melts of investigated alloys, and our data are compared with the results of other authors. Procedural aspects of the investigation of the density of binary and multicomponent melts are treated, which are associated with the emergence of gradients of concentration of the components in the gravity field. Tables are compiled of the temperature dependences of the thermal properties of pure tin and lead from zero to 1600–1950 K. It is demonstrated that the density of the solid and liquid phases of tin—lead system in the investigated concentration range may be calculated in an additive approximation with an error of 0.1–0.3% or less.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
Arpi, R., Z. Metallk., 1914, vol. 5, p. 142.
Gavrilin, I.V., Liteinoe Proizvod., 1982, no. 4, p. 2.
Gavrilin, I.V., Frolova, T.B., and Zakharov, V.P., Izv. Akad. Nauk SSSR Met., 1984, no. 3, p. 191.
Zu, F.Q., Zhu, Z.G., Guo, L.J. et al., Phys. Rev., 2001, vol. 64b, p. 180203 (R).
Khairulin, R.A., Stankus, S.V., and Bezverkhy, P.P., J. Alloys Compounds, 2000, vol. 312, no. 1–2, p. 211.
Stankus, S.V. and Khairulin, R.A., Liquation in Liquid Alloys of Tin—Lead System, Trudy XI Rossiiskoi konferentsii “Stroyenie i svoistva metallicheskikh i shlakovykh rasplavov (Proc. XI Russian Conf. on the Structure and Properties of Metal and Slag Melts), Chelyabinsk: Izd. YuUrGU (South-Ural State Univ.), 2004, vol. 4, p. 37.
Khairulin, R.A. and Stankus, S.V., J. Phase Equilibria, 1999, vol. 20, no. 2, p. 148.
Stankus, S.V. and Khairulin, R.A., Teplofiz. Vys. Temp., 1992, vol. 30, no. 3, p. 487.
Basin, A.S., Baginskii, A.V., Kolotov, Ya.L., and Stankus, S.V., High-Temperature Gamma Densimeter and Dilatometer, in Gamma-metod v metallurgicheskom eksperimente (Gamma Method in Metallurgical Experiment), Novosibirsk: Inst. of Thermophysics, Siberian Div., USSR Acad. Sci., 1981, p. 11.
Stankus, S.V. and Tyagel’skii, P.V., Rasplavy, 1991, no. 2, p. 14.
Thresh, H.R., Crawley, A.F., and White, W.G., Trans. Metall. Soc. AIME, 1968, vol. 242, p. 819.
Touloukian, Y.S., Kirby, R.K., Taylor, R.E., and Desai, P.D., Thermal Expansion. Metallic Elements and Alloys, in Thermophysical Properties of Matter, New York: Plenum, 1975, vol. 12, p. 1348.
Crawley, A.F., Int. Metall. Rev., 1974, vol. 19, p. 32.
Novikova, S.I., Teplovoye rashirenie tverdykh tel (Thermal Expansion of Solids), Moscow: Nauka, 1974.
Stankus, S.V., The Variation of Density of Elements in Melting. Methods and Experimental Data, Preprint of Inst. of Thermophysics, Siberian Div., Russian Acad. Sci., Novosibirsk, 1991, No. 247.
Khairulin, R.A. and Stankus, S.V., The Thermal Properties of Lead and Aluminum in the Solid and Liquid States, in Teplofizicheskie svoistva rastvorov, rasplavov, i kompozitov, Novosibirsk: Inst. of Thermophysics, Siberian Div., Russian Acad. Sci., 1992, p. 13.
Tonkov, E.Yu., Fazovye diagrammy elementov pri vysokom davlenii (Phase Diagrams of Elements at High Pressure), Moscow: Nauka, 1979.
Author information
Authors and Affiliations
Additional information
__________
Translated from Teplofizika Vysokikh Temperatur, Vol. 44, No. 3, 2006, pp. 393–400.
Original Russian Text Copyright © 2006 by S. V. Stankus and R. A. Khairulin.
Rights and permissions
About this article
Cite this article
Stankus, S.V., Khairulin, R.A. The density of alloys of tin—lead system in the solid and liquid states. High Temp 44, 389–395 (2006). https://doi.org/10.1007/s10740-006-0048-5
Received:
Issue Date:
DOI: https://doi.org/10.1007/s10740-006-0048-5