Abstract
Backfilling of mine voids is mandatory to avoid subsequent ground stability problems in the form of subsidence. River sand and mill tailings have been widely used since a long time as backfilling materials. However, with a strict regulation banning river sand mining in India, research for developing alternative engineering materials substituting sand has gained importance. In the present study four fly ash composite materials (FCMs) was developed from the fly ash obtained from a captive thermal unit of Rourkela Steel Plant (RSP). The main constituent of the composite were fly ash, lime and gypsum. Detailed physical, and engineering properties were determined for the FCMs. Significant increases in the compressive strength were obtained after 56 days of curing time. A detailed SEM studies was undertaken to account for the increase in strength with time. The fly ash composite developed from RSP has potential to be used as substitute to sand for backfilling the mine voids.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
T.Y. Chu D.T. Davidson W.L. Goecker Z.C. Moh (1955) ArticleTitleSoil stabilization with lime-fly ash mixtures: preliminary studies with silty and clayey soils Highway Research Board Bulletin 108 102–112
Chugh, Y.P., Biswas, D., Deb, D. and Deaton, G. (2001) Underground placement of coal processing waste and coal combustion byproducts based paste backfill to enhance mining economics. ICCI No. 97US1, p. 52
A.M. DiGioia W.L. Nuzzo (1972) ArticleTitleFly ash as structural fill Journal of Power Div., ASCE 98 IssueID1 77–92
C.J. Fawconnier R.W.O. Korsten (1982) ArticleTitleAsh fill in pillar design – increased underground extraction of coal The SAIMM Monograph Series 4 277–361
Galvin, J.M. and Wagner, H. (1982) Use of ash to improve strata control in bord and pillar working. In Proceedings Symposium on Strata Mechanics, University of Newcastle upon Tyne, pp. 264–269
J.C. Gamble (1971) Durability, Plasticity, Classifications of Shales and Other Argillaceous Rocks University of Illinois USA
A. Ghosh (1996) Environmental and Engineering Characteristics of Stabilized Low Lime Fly Ash Deptartment of Civil Engg. IIT Kharagpur, India
A. Ghosh S. Subbarao (2001) ArticleTitleMicro-structural development in fly ash modified with lime and gypsum Journal of Materials in Civil Engineering 13 IssueID1 65–70 Occurrence Handle10.1061/(ASCE)0899-1561(2001)13:1(65)
Gopalan, M.K. and Haque, M.N. (1986) Strength development of clinically cured plain and fly ash concretes. In Proceedings of Aus. Road Research Board, 13(Pt. 5), 27–33
Gray, D.H. and Lin, Y.K. (1972) Engineering properties of compacted fly ash. In Proceedings of ASCE, Journal of SMFE, 98(SM4), 361–386
Grice, T. (1998) Underground Mining with Backfill 2nd Annual Summit. Mine Tailings Disposal System, Brisbane, Nov 24–25, pp. 1–13
IS Codes. (1987) Compendium of Indian Standards on Soil Engineering. Part-I. Bureau of Indian Standards, Nov., New Delhi, India
IS: 10050. (1981) Method for determination of Slake Durability Index of Rocks, UDC 624:131:537, March, 1982, pp. 1–9
IS: 100080-1981. (1982) Method of tests for determination of tensile strengths by indirect tests on rock specimen, UDC 691.2:620.172, November, ISI New Delhi, pp. 1–13
M.L. Jackson (1958) Soil Chemical Analysis Prentice-hall International London
Joshi, R.C., Natt, G.S. and Wright, P.J. (1981) Soil improvement by lime–fly ash slurry injection. In Proceedings 10th International Conference on Soil Mechanics & Foundation Engineering, Stockholm, 3, 707–712
Kim, S.S. and Chun, B.S. (1994) The study on a practical use of wasted coal fly ash for coastal reclamation. XIII, ICSMFE, pp. 1607–1612
Kumar, V., Ahuja, B.P., Dattatryulu, J.V., Bhaskar Rao, B., Ghosh, C.N. and Sharma, A.K. (2003) Hydraulic stowing of pond ash in underground mines of Manuguru, India. In Proceedings 3rd International Conference on Fly ash utilization and Disposal, Feb 19–21, New Delhi, India, pp. VI-1–7
Kumar, V. (2003) Key note address, In: R. Krishnamurthy and V. Kumar (ed.), 3rd International Conference on Fly Ash Utilisation and Disposal, Feb 19–21, New Delhi, India
A.H. Lav M.A. Lav (2000) ArticleTitleMicro structural development of stabilized fly ash as pavement base material Journal of Materials in Civil Engineering, ASCE 12 IssueID2 157–163 Occurrence Handle10.1061/(ASCE)0899-1561(2000)12:2(157)
Maser, K.R., Wallhagen, R.E. and Dieckman, J. (1975) Development of fly ash cement mine sealing system. USBM, Open File Report 26–76, NTIS–PB-250611
Mehta, P.K. (1985) Cement and Concreter Research, 15, 669
Palariski, J. (1993) The use of fly ash tailings, rock and binding agents as consolidated backfill for coal mines, In: H.W. Gelen (ed.), Proceedings of Mine fill 1993, SAIMM, pp. 403–408
Petulanas, G.M. (1988) High volume fly ash utilization projects in the US and Canada (2nd edn.), Final Report CS-4446 to EPRI, Palo Alto, CA, p. 244
Raymond, S. (1961) Pulverized fuel ash as embankment material. In Proceedings of the Institution of Civil Engineers, 19, 515–536
P.V. Sivapullaiah J.P. Prasanth A. Sreedhara (1995) ArticleTitleOptimization of lime content for fly ash Journal of Testing and Evaluation, JUTVA 23 IssueID3 222–227 Occurrence Handle10.1520/JTE10414J
A. Xu S.L. Sarkar (1994) ArticleTitleMicro structural developments in high-volume fly ash cement system Journal of Materials in Civil Engineering, ASCE 1 117–136 Occurrence Handle10.1061/(ASCE)0899-1561(1994)6:1(117)
Yudhvir, V. and Hamjo, Y. (1991) Application of geotechnical engineering to environmental control, Theme Lecture-5, 9ARC, Bangkok, Thailand, 2, 431–469
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Mishra, M.K., Karanam, U.M.R. Geotechnical characterization of fly ash composites for backfilling mine voids. Geotech Geol Eng 24, 1749–1765 (2006). https://doi.org/10.1007/s10706-006-6805-8
Received:
Accepted:
Issue Date:
DOI: https://doi.org/10.1007/s10706-006-6805-8