Abstract
Scrap tyres can be shredded into chips and can easily be mixed with granular soils. To assess the behaviour of the admixtures, compressibility and triaxial compression tests were carried out by varying chip size and chip content. The results demonstrated that sand–tyre chip mixtures up to 20% could be a potential material for highway construction and embankment construction up to around 10 m height.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
I. Ahmed (1993) Laboratory study on properties of rubber soils Purdue University West Lafayette, IN
Ahmed I. and Lovell C. (1993) Use of rubber tyres in highway construction. Utilization of Waste Material in Civil. Engineering Construction, ASCE, New York, NY, pp. 166–181
Automan (1999) Brochure, Society of Indian Automobile Manufacturers (SIAM).
Bernal, A., Salgado, R. and Lovell, C. (1996) Laboratory study on the use of tyre shreds and rubber-sand in backfills and reinforced soil applications. Final Report., Indiana Department of Transportation, Joint Highway Research Project, Report No. FHWA/IN/JHRP-96, Purdue Univ., West Lafayette, Indiana.
A.W. Bishop D.J. Henkel (1962) The Measurement of Soil Properties in the Triaxial Test Edward Arnold Publishers Ltd. London
P.J. Bosscher T.B. Edil N. Eldin (1993) Construction and performance of shredded waste tire test embankment Transportation Research Board Washington, D.C 44–52
T.B. Edil P.J. Bosscher (1994) ArticleTitleEngineering properties of tire chips and soil mixtures Geotechincal Testing Journal 17 IssueID4 453–464 Occurrence Handle10.1520/GTJ10306J
G.J. Foose C.H. Benson P.J. Bosscher (1996) ArticleTitleSand reinforced with shredded waste tires Journal of Geotechincal Engineering Division 122 IssueID9 760–767
W.G. Holtz H.J. Gibbs (1956) ArticleTitleTriaxial shear tests on pervious gravelly soils Journal of Soil Mechanics and Foundation Division 82 IssueIDSM 1 1–22
E.J. Hoppe (1994) Field study of shredded-tyre embankment Virginia Department of Transportation Richmond, VA
Humphrey, D. and Manion, W. (1992) Properties of tyre chips for light weight fill, in Grouting, Soil Improvement and Geosynthetics, ASCE, New York, Vol. 2, pp. 1344–1355
Humphrey, D. N. and Sandford, T. C. (1993) Tyre chips as light weight subgrade fill and retaining wall backfill, in Proceeding of the Symposium on Recovery and Effective Reuse of Discarded Materials and Bye-products for Construction of Highway Facilities, Federal Highway Administration, Washington, D.C., pp. 5-87–5-99
J.H. Lee R. Salgado A. Bernal C.W. Lovell (1999) ArticleTitleShredded tires and rubber-sand as light weight backfill Journal of Geotechnical and Geoenvironmental Engineering Division 125 IssueID2 132–141 Occurrence Handle10.1061/(ASCE)1090-0241(1999)125:2(132)
Statistical Yearbook (2000) Confederation of Indian Industry, New Delhi, India
Venkatappa Rao, G. and Dutta, R. K. (2001) Utilization of shredded tyres in highway engineering, in Proceedings of the International Seminar on Sustainable Development in Road Transport, New Delhi, pp. I-257–I-268
W.Y. Wu C. Benda R.F. Cauley (1997) ArticleTitleTriaxial determination of shear strength of tyre chips Journal of Geotechnical and Geoenvironmental Engineering Division 123 IssueID4 479–482
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Rao, G.V., Dutta, R.K. Compressibility and Strength Behaviour of Sand–tyre Chip Mixtures. Geotech Geol Eng 24, 711–724 (2006). https://doi.org/10.1007/s10706-004-4006-x
Received:
Revised:
Accepted:
Issue Date:
DOI: https://doi.org/10.1007/s10706-004-4006-x