Abstract
This paper studies the importance of the cohesive zone in the modelling of a fluid driven fracture under plain strain conditions. The fracture is driven by pumping of an incompressible viscous fluid at the fracture inlet. Rock deformation is modeled for linear elastic and poroelastic solids. Fluid flow in the fracture is modeled by lubrication theory. The cohesive zone approach is used as the fracture propagation criterion. Finite element analysis was used to compute the solution for the crack length, the fracture opening and propagation pressure as a function of the time and distance from the wellbore. It is demonstrated that the crack profiles and the propagation pressures are larger in the case of elastic-softening cohesive model compared to the results of the rigid-softening cohesive model for both elastic and poroelastic cohesive solids. It is found that the results are affected by the slope of the loading branch of the cohesive model and they are nearly unaffected from the exact form of the softening branch. Furthermore, the size of the process zone, the fracture geometry and the propagation pressure increase with increasing confining stresses. These results may explain partially the discrepancies in net-pressures between field measurements and conventional model predictions.
Article PDF
Similar content being viewed by others
Explore related subjects
Discover the latest articles, news and stories from top researchers in related subjects.Avoid common mistakes on your manuscript.
References
Abaqus (2006) Version 6.6 Manuals
Adachi J, Siebrits E, Peirce A, Desroches J (2007) Computer simulation of hydraulic fractures. Int J Rock Mech Min Sci 44: 739–757
Adachi J, Detournay E (2008) Plain strain propagation of a hydraulic fracture in permeable rock. Eng Frac Mech 75: 4666–4694
Barenblatt GI (1959) The formation of equilibrium cracks during brittle fracture: general ideas and hypothesis, axially symmetric cracks. Appl Math Mech (PMM) 23: 622–636
Barenblatt GI (1962) The mathematical theory of equilibrium cracks in brittle fracture. Adv Appl Mech 7: 55–129
Biot MA (1941) General theory of three dimensional consolidation. J Appl Phys 12: 155–164
Boone TJ, Wawrzynek PA, Ingraffea AR (1986) Simulation of fracture process in rock with application to hydrofracturing. Int J Rock Mech Min Sci Geomech Abstr 23: 255–265
Boone JT, Ingraffea AR (1990) A numerical procedure for simulation of hydraulically driven fracture propagation in poroelastic media. Int J Numer Anal Methods Geomech 14: 27–47
Camacho GT, Ortiz M (1996) Computational modeling of impact damage in brittle materials. Int J Solils Struct 33: 2899–2938
Dugdale DS (1960) Yielding of steel sheets containing slits. J Mech Phys Solids 8: 100–104
Economides M, Nolte K (2000) Reservoir stimulation. Wiley, Chichester
Espinosa HD, Zavattieri PD (2003) A grain level model for the study of failure initiation and evolution in polycrystalline brittle materials. Part I: theory and numerical implementation. Mech Mater 35: 333–364
Geubelle PH, Baylor JS (1998) Impact induced delamination of composites: 2D simulation. Compos Part B 29: 589–602
Hillerborg A, Modeer M, Petersson PE (1976) Analysis of crack formation and crack growth in concrete by means of fracture mechanics and finite elements. Cem Concr Res 6: 773–782
Jeffrey RG, Settari A, Mills KW, Zhang X, Detournay E (2001) Hydraulic fracturing to induce caving: fracture model development and comparison to field data. In: Elsworth D, Tinucci JP, Heasley KA (eds.) Rock mechanics in the national interest-proceedings of the 38th US rock mechanics symposium, Lisse Balkema 1:251–259
Kanninen MF, Popelar CH (1985) Advanced fracture mechanics. Oxford University Press, NY
Legarth B, Huenges E, Zimmermann G (2005) Hydraulic fracturing in sedimentary geothermal reservoir: results and implications. Int J Rock Mech Min Sci 42: 1028–1041
Lewis RW, Schreffler BA (2000) The finite element method in the static and dynamic deformation and consolidation of porous media. Wiley, London
Moschovidis Z et al. (2000) The Mounds drill-cuttings injection experiment: final results and conclusions. In: Proceedings of the IADC/SPE drilling conference. Richardson: Society of Petroleum Engineers; [SPE 59115]
Murdoch LC, Slack WW (2002) Forms of hydraulic fractures in shallow fine grained formations. J Geotech Geoenviron 128: 479–487
Needleman A (1987) A continuum model for void nucleation by inclusion debonding. ASME J Appl Mech 54: 525–531
Papanastasiou P, Thiercelin M (1993) Influence of inelastic rock behavior in hydraulic fracturing. Int J Rock Mech Min Sci Geomech Abstr 30: 1241–1247
Papanastasiou P (1997) The influence of plasticity in hydraulic fracturing. Int J Fract 84: 61–79
Papanastasiou P (1999a) An efficient algorithm for propagating fluid driven fractures. Comput Mech 24: 258–267
Papanastasiou P (1999b) The effective fracture toughness approach in hydraulic fracturing. Int J Fract 96: 127–147
Rice JR (1968) A path independent integral and the approximate analysis of strain concentration by notches and cracks. J Appl Mech 57: 379–386
Rice JR, Cleary MP (1976) Some basic stress diffusion solutions for fluid-saturated elastic porous media with compressible constituents. Rev Geophys Space Phys 14: 227–241
Schrefler BA, Secchi S, Simoni L (2006) On adaptive refinement techniques in multi-field problems including cohesive fracture. Comput Methods Appl Mech Eng 195: 444–461
Sinclair GB (1996) On the influence of cohesive stress-separation laws on elastic stress singularities. J Elast 44: 203–221
Spence DA, Turcotte DL (1985) Magma-driven propagation crack. J Geophys Res 90: 575–580
Van Dam DB, Papanastasiou P, De Pater CJ (2002) Impact of rock plasticity on hydraulic fracture propagation and closure. J Prod Facil (SPE 78812) 17(3): 149–159
Wawersik WR, Rudnicki JW, Dove P, Harris J, Logan JM, Pyrak-Nolte L, Orr FM Jr, Ortoleva PJ, Richter F, Warpinski NR, Wilson JL, Wong TF (2001) Terrestrial sequestration of CO2: an assessment of research needs. Adv Geophys 43: 97–177
Xu X-P, Needleman A (1994) Numerical simulations of fast crack growth in brittle solids. J Mech Phys Solids 42(9): 1397–1434
Zienkiewicz OC (1984) Coupled problems and their numerical solution. In: Lewis RW, Bettess P, Hinton E (eds) Numerical methods in coupled systems. Wiley, London
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Sarris, E., Papanastasiou, P. The influence of the cohesive process zone in hydraulic fracturing modelling. Int J Fract 167, 33–45 (2011). https://doi.org/10.1007/s10704-010-9515-4
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10704-010-9515-4