Abstract
The thermal characteristics of ten kinds of para-aramid, meta-aramid, polyoxadiazole, and polyimide fibres were investigated by dynamic thermogravimetric analysis, differential scanning calorimetry, and thermomechanical analysis. It was shown that thermooxidative degradation of these fibres begins at 400–450° C and is intensified at higher temperatures. These fibres are characterized by dimensional stability up to the temperature of onset of thermooxidative processes (up to 400–450°C) except for meta-aramid fibres, which exhibit approximately 5% shrinkage at high temperatures. With respect to thermal stability, the fibres are in the following order: polyimide > heterocyclic para-aramid and polyoxadiazole > carbocyclic para-aramid > meta-aramid.
Article PDF
Similar content being viewed by others
Explore related subjects
Discover the latest articles, news and stories from top researchers in related subjects.Avoid common mistakes on your manuscript.
REFERENCES
L. V. Avrorova, A. V. Volokhina, et al., Khim. Volokna, No. 4, 21–26 (1989).
G. I. Kudryavtsev, V. Ya. Varshavskii, et al., Reinforcing Chemical Fibres for Composite Materials [in Russian], Khimiya, Moscow (1992).
K. E. Perepelkin, Ross. Khim. Zh., 46, No.1, 31–48 (2002).
K. E. Perepelkin, in: High-Performance Fibres, J. W. S. Hearle (ed.), WoodheadPubl., Cambridge (2001), pp. 115–132; 146–154.
K. E. Perepelkin, Chem. Fibers Intern., 54, No.2, 101–107 (2004).
S. V. Kudryavtseva and E. V. Samardukov, Khim. Volokna, No. 1, 38–40 (1995).
A. V. Makarova, E. N. Polyakova, and I. F. Semenov, in: Current Problems in Heat Exchange and Aviation Engineering [in Russian], Moscow (1983), pp. 33–36.
K. E. Perepelkin, S. A. Baranova, and E. Yu. Gurova, Khim. Volokna, No. 1, 34–38 (1995).
E. Yu. Gurova, Effect of Thermal Aging on the Mechanical Properties of Fibres Made of Aromatic Polymers, Candidate Dissertation, St. Petersburg State University of Technology and Design, Leningrad (2005).
I. V. Andreeva, Change in the Properties of High-Modulus para-Aramid fibres in Thermal Aging, Candidate Dissertation, St. Petersburg State University of Technology and Design, Leningrad (2005).
N. N. Panikarova, G. Ya. Rudinskaya, et al., The Chemical Fibre Industry [in Russian], Scientific-Research Institute of Engineering and Economic Studies in the Chemical Industry, Moscow (1975), pp. 19–23.
M. I. Bessonov, M. M. Koton, et al., Polyimides — a Class of Thermostable Polymers [in Russian], Nauka, Leningrad (1983).
L. P. Kobets, in: Thermal Stability of Construction Plastics [in Russian], E. B. Trostyanskaya (ed.), Khimiya, Moscow (1980), pp. 107–135.
T. K. Musina and Z. G. Oprits, in: International Conference “Fibre Materials — 21st Century” [in Russian], Khimiya, Moscow (1980), pp. 107–135.
A. T. Kalashnik, Candidate Dissertation, L. Ya. Karpov Scientific-Research Institute of Physical Chemistry, Moscow (1990).
K. E. Perepelkin, I. V. Andreeva, et al., Khim. Volokna, No. 4, 22–26 (2003).
K. E. Perepelkin, O. B. Malan'ina, et al., Khim. Volokna, No. 5, 45–48 (2004).
S. A. Pavlova, I. V. Zhuravleva, and Yu. I. Tolchinskii, Thermal Analysis of Organic and Macromolecular Compounds [in Russian], Khimiya, Moscow (1983).
Jan F. Rabek, Experimental Methods in Polymer Chemistry, Wiley Interscience, Chichester—New York—Toronto (1980).
A. V. Volokhina, V. B. Glazunov, et al., Khim. Volokna, No. 4, 21–26 (1989).
K. M. Kirin, G. A. Budnitskii, and V. A. Nikishin, Khim. Volokna, No. 1, 64–67 (2004).
Author information
Authors and Affiliations
Additional information
__________
Translated from Khimicheskie Volokna, No. 5, pp. 27–31, September–October, 2005.
Rights and permissions
About this article
Cite this article
Perepelkin, K.E., Pakshver, E.A., Andreeva, I.V. et al. Thermal Characteristics of High-Strength and Thermostable Aromatic Fibres. Fibre Chem 37, 346–351 (2005). https://doi.org/10.1007/s10692-006-0006-3
Issue Date:
DOI: https://doi.org/10.1007/s10692-006-0006-3