Abstract
Soils contaminated by potentially toxic elements (PTEs) which affect human health, such as zinc, lead, mercury, cadmium, and arsenic, were applied. The aims of this study are to judge contamination of soil and also to evaluate concentration of contaminated soil using electrical properties such as electrical resistivity and permittivity. The frequency was applied in the experiment ranged from 100 Hz to 10 MHz. As a result, the values of electrical resistivity and permittivity of each soil contaminated by PTEs could be presented as a function related to frequency and could determine whether the soil was contaminated. Also, results indicated that electrical properties give a reliable estimation of concentrations of PTEs contamination in soil.
Article PDF
Similar content being viewed by others
Explore related subjects
Discover the latest articles, news and stories from top researchers in related subjects.Avoid common mistakes on your manuscript.
References
Agilent Technology (2000). Impedance measurement handbook (2nd ed.). Santa Clara: Agilent.
Arulanandan, K., & Muraleetharan, K. (1988). Level ground soil-liquefaction analysis using in-situ properties:1. Journal of Geotechnical Engineering, 114(7), 753–770.
ASTM D150 (1994). Standard test methods for AC loss characteristics and permittivity (dielectric constant) of solid electrical insulation. ASTM D150–94, Philadelphia.
Farmer, J. G., & Eades, L. J. (1996). Stable lead isotope record of lead pollution in Loch Lomond sediments since 1630 A.D. Environmental Science and Technology, 30, 3080–3083.
Gelinas, Y., & Schmit, J. P. (1997). Extending the use of the stable lead isotope ratios as a tracer in bioavailability study. Environmental Science and Technology, 31, 1968–1972.
Gross, G. W., & McGehee, R. M. (1988). The layered-capacitor method for bridge measurements of conductive dielectrics. IEEE Transactions on Electrical Insulation, 23, 387–396.
Hansmann, W., & Koppel, V. (2000). Lead-isotopes as tracers of pollutants in soils. Chemical Geology, 171, 123–144.
Harrison, R. M., & Willson, S. J. (1985). The chemical composition of highway drainage water 1- Major ions and selected trace metals. Science of the Total Envirionmental, 43, 63–77.
Helmke, P. A. (1996). Neutron activation analysis, methods of soil analysis. Part 3: Chemical methods (pp. 141–160). Madison: Soil Science Society of America.
Hill, N. E., Vaughan, W. E., Price, A. H., & Davies, M. (1969). Dielectric properties and molecular behaviour. London: Reinhold.
Karathanasis, A. D., & Hajek, B. F. (1996). Elemental analysis by X-ray fluorescence, methods of soil analysis. Part 3: Chemical methods (pp. 161–224). Madison: Soil Science Society of America.
Kaya, A., Lovell, C. W., & Altschffel, G. A. (1994). The effective use of time domain reflectometry(TDR) in geotechnical engineering. In Proc., symp and workshop on time domain reflectometry in envir., infrastructure and min. application (pp. 398–409). Evanston: Northwestern Univ.
Keller, G. V., & Frischknecht, F. C. (1966). Electrical methods in geophysical prospecting. Oxford: Pergamon.
Marcantonio, F., Flowers, G. C., & Templin, N. (1999). Lead contamination in a wetland watershed: Isotopes as fingerprints of pollution. Environmental Geology, 39(9), 1070–1076.
McCarter, W. J. (1984). The electrical resistivity characteristics of compacted clays. Geotechnique, 34(2), 263–267.
Mitchell, J. K. (1993). Fundamentals of soil behavior (2nd ed.). Hoboken: Wiley.
Munksgaard, N. C., Batterham, G. J., & Parry, D. L. (1998). Lead isotope ratios determined by ICP-MS: Investigation of anthropogenic lead in seawater and sediment from the Gulf of Carpentaria, Australia. Marine Pollution Bulletin, 36(7), 527–534.
Nriagu, J. O. (1988). A silent epidemic of environmental metal poisoning? Environmental Pollution, 50, 139–161.
Nriagu, J. O., & Pacyna, J. M. (1988). Quantitative assessment of worldwide contamination of air, water, and soils by trace metals. Nature(London), 333, 134–139.
Oh, M., Kim, Y., & Park, J. (2007). Factors affecting the complex permittivity spectrum of soil at a low frequency range of 1 kHz – 10 MHz. Environmental Geology, 51, 821–833.
Parkhomenko, E. (1967). Electrical properties of rocks (trans: Keller, G. V.). New York: Plenum.
Rinaldi, V. A., & Cuestas, G. A. (2002). Ohmic conductivity of a compacted silty clay. Journal of Geotechnical and Geoenvironmental Engineering, 128(10), 824–835.
Santamarina, J. C., Klein, K. A., & Fam, M. A. (2001). Soils and waves. New York: Wiley.
Scott, J. H., Caroll, R. D., & Cunningham, D. R. (1967). Dielectric constant and electrical conductivity measurements of moist rock: A new laboratory method. Journal of Geophysical Research, 72, 5101–5115.
Selig, E. T., & Mansukhani, S. (1975). Relationship of soil moisture to the dielectric property. Journal of the Geotechnical Engineering, ASCE, 101(GT8), 755–770.
Smith, S. S., & Arulanandan, K. (1981). Relationship of electrical dispersion to soil properties. Journal of the Geotechnical Engineering, 107, 591–604.
Tessier, A., Campbell, P. G. C., & Bisson, M. (1979). Seqeuntial extraction procedure for the speciation of particulate trace metals. Analytical Chemistry, 51(7), 844–851.
Thevanayagam, S. (1993). Electrical response of two-phase soil: Theory and applications. Journal of the Geotechnical Engineering, 119(8), 1250–1275.
Thevanayagam, S. (1995). Envirionmental soil characterization using electric dispersion. In Proc., ASCE spec. conf. of the geoenvirionment 2000, N. Y. (pp. 137–150). New York: ASCE.
Thornton, I. (1993). Environmental geochemistry and health in the 1990s: A global perspective. Applied Geochemistry, Suppl, 2, 203–210.
Ward, S. (1990). Resistivity and induced-polarization methods. In S. Ward (Ed.) Geotechnical and enviromental geophys 1 (pp. 147–190).
Wong, C. S. C., & Li, X. (2003). Analysis of heavy metal contaminated soils. Practice Peridical of Hazardous, Toxic, and Radioactive Waste Management, 7(1), 12–18.
Yoon, G. L., Oh, M. H., & Park, J. B. (2002). Laboratory study of landfill leachate effect on resistivity in unsaturated soil using cone penetrometer. Environmental Geology, 43, 18–28.
Yoon, G. L., & Park, J. B. (2001). Sensitivity of leachate and fine contents on electrical resistivity variations of sandy soil. Journal of Hazardous Materials, B84, 147–161.
Zhu, B. Q., Chen, Y. W., & Peng, J. H. (2001). Lead isotope geochemistry of the urban environment in the Pearl River Delta. Applied Geochemistry, 16, 409–417.
Author information
Authors and Affiliations
Corresponding author
Electronic Supplementary Material
Below is the link to the electronic supplementary material.
Electronic Supplementary Material (ESM)
(DOC 133 KB)
Rights and permissions
About this article
Cite this article
Son, Y. Assessment of concentration in contaminated soil by potentially toxic elements using electrical properties. Environ Monit Assess 176, 1–11 (2011). https://doi.org/10.1007/s10661-010-1562-9
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10661-010-1562-9