Abstract
In this study, soil samples were collected from Edirne, Turkey in both summer and winter seasons and subjected to the modified Community Bureau of Reference (BCR) sequential extraction procedure in order to investigate the chemical partitioning of metals in soils and to predict heavy metals uptake by wheat grains which grown at the same soils. The samples were subjected to a three stage extraction procedure proposed by the BCR. The three phases that were separated out in the following order: (1) carbonate, exchangeable, (2) Fe–Mn oxides, and (3) organic matter. Metal concentrations of soil fractions and grain samples were determined by inductively coupled plasma atomic emission spectroscopy. The wheat samples were prepared to analysis using microwave acid digestion procedure. The pseudo-total concentrations of metals were determined after aqua regia digestion. The analytical accuracy of the method was evaluated by using the Standard Reference Materials (BCR 142R Light Sandy Soil, NIST 2711 Montana Soil, and NIST 2704 Buffalo River Sediment). The sum of the metal contents obtained from the modified BCR sequential extraction procedure and pseudo-total metal contents for soil samples were used to calculate recovery values. In order to evaluate the bioavailability of metals, the relationships between the wheat-metal and soil-extractable metal concentrations were compared.
Article PDF
Similar content being viewed by others
Explore related subjects
Discover the latest articles, news and stories from top researchers in related subjects.Avoid common mistakes on your manuscript.
References
Adriano, D. C. (1986). Trace elements in the terrestial environment. New York: Springer.
Brekken, A., & Steinnes, E. (2004). Seasonal concentrations of cadmium and zinc in native pasture plants: Consequences for grazing animals. Science of the Total Environment, 326, 181–195.
Davidson, M. D., Duncan, A. L., Littlejohn, D., Ure, A. M., & Garden, L. M. (1998). A critical evaluation of the three-stage BCR sequential extraction procedure to assess the potential mobility and toxicity of heavy metals in industrially-contaminated land. Analytica Chimica Acta, 363, 45–55.
European Soil Bureau (1998). Land information systems: Developments for planning the sustainable use of land resources. In H. J. Heineke, W. Eckelmann, A. J. Thomasson, R. J. A. Jones, L. Montanarella, & B. Buckley (Eds.), EUR 17729 EN (546 pp.). Luxembourg: Office for Official Publications of the European Communities.
FAO/WHO (1984). Contaminants. In Codex Alimentarius (Vol. XVII, 1st ed.). Rome: Codex Alimentarius Commission.
Filgueiras, A. V., Lavilla, I., & Bendicho, C. (2002). Chemical sequential extraction for metal partitioning in environmental solid samples. Journal of Environmental Monitoring, 4, 823–857.
Gleyzes, C., Sellier, S., & Astruc, M. (2002). Fractionation studies of trace elements in contaminated soils and sediments: A review of sequential extraction procedures. Trends in Analytical Chemistry, 21, 451–467.
He, Z. L. L., Yang, X. E., & Stoffella, P. J. (2005). Trace elements in agroecosystems and impacts on the environment. Journal of Trace Elements in Medicine & Biology, 19, 125–140.
Huang, M., Zhou, S., Sun, B., & Zhao, Q. (2008). Heavy metals in wheat grain: Assessment of potential health risk for inhabitants in Kunshan. China Science of The Total Environment, 405, 54–61.
Kabata-Pendias, A., & Pendias, H. (2001). Trace elements in soils and plants. Boca Raton: CRC.
Kennedy, V. H., Sanchez, A. L., Oughton, D. H., & Rowland, A. P. (1997). Use of single and sequential chemical extractants to assess radionuclide and heavy metal availability from soils for root uptake. Analyst, 122, 89–100.
Kim, N. D., & Fergusson, J. E. (1994). Seasonal-variations in the concentrations of cadmium, copper, lead and zinc in leaves of the horse chestnut (Aesculus-hippocastanum l). Environmental Pollution, 86, 89–97.
Lopez-Sanchez, J. F., Rubio, R., & Rauret, G. (1993). Comparison of two sequential extraction procedures for trace metal partitioning in sediments. Journal of Environmental Analytical Chemistry, 51, 113–121.
Lopez-Sanchez, J. F., Sahuquillo, A., Fiedler, H. D., Rubio, R., Rauret, G., Muntau, H., et al. (1998). CRM 601, a stable material for its extractable content of heavy metals. Analyst, 123, 1675–1677.
Marin, A., Lopez-Gonzalvez, A., & Barbas, C. (2001). Development and validation of extraction methods for determination of zinc and arsenic speciation in soils using focused ultrasound—Application to heavy metal study in mud and soils. Analytica Chimica Acta, 442, 305–318.
Marin, B., Valladon, M., Polve, M., & Monaco, A. (1997). Reproducibility testing of a sequential extraction scheme for the determination of trace metal speciation in a marine reference sediment by inductively coupled plasma-mass spectrometry. Analytica Chimica Acta, 342, 91–112.
Marschnar, H. (1995). Mineral nutrition of higher plants (2nd ed.). London: Academic.
Mester, Z., Cremisini, C., Ghiara, E., & Morabito, R. (1998). Comparison of two sequential extraction procedures for metal fractionation in sediment samples. Analytica Chimica Acta, 359, 133–142.
Nardi, E. P., Evangelista, F. S., Tormen, L., SaintPierre, T. D., Curtius, A. J., de Souza, S. S., et al. (2009). The use of inductively coupled plasma mass spectrometry (ICP-MS) for the determination of toxic and essential elements in different types of food samples. Food Chemistry, 112, 727–732.
Nemati, K., Abu Bakar, N. K., Sonhanzadeh, E., & Abas, M. R. (2009). A modification of the BCR sequential extraction procedure to investigate the potential mobility of copper and zinc in shrimp aquaculture sludge. The Microchemical Journal, 92, 165–169.
Parat, C., Leveque, J., Dousset, S., Chaussod, R., & Andreaux, F. (2003). Comparison of three sequential extraction procedures used to study trace metal distribution in an acidic sandy soil. Analytical and Bioanalytical Chemistry, 376, 243–247.
Petit, M. D., & Rucandio, M. I. (1999). Sequential extractions for determination of cadmium distribution in coal fly ash, soil and sediment samples. Analytica Chimica Acta, 401, 283–291.
Pueyo, M., Sastre, J., Hernandez, E., Vidal, M., Lopez-Sanchez, J. F., & Rauret, G. (2003). Prediction of trace element mobility in contaminated soils by sequential extraction. Journal of Environmental Quality, 32, 2054–2066.
Quevauviller, P., Rauret, G., & Griepink, B. (1993). Conclusions of the workshop - single and sequential extraction in sediments and soils. International Journal of Environmental Analytical Chemistry, 51, 231–235.
Quevauviller, P., Rauret, G., Lopez-Sanchez, J. F., Rubio, R., Ure, A. M., & Huntau, H. (1997). Certification of trace metal extractable contents in a sediment reference material (CRM 601) following a three-step sequential extraction procedure. Science of The Total Environment, 205, 223–234.
Ramesh, S. A., Choimes, S., & Schachtman, D. P. (2004). Over-expression of an Arabidopsis zinc transporter in Hordeum vulgare increases short-term zinc uptake after zinc deprivation and seed zinc content. Plant Molecular Biology, 54, 373–385.
Rauret, G., Lopez-Sanchez, J. F., Sahuquillo, A., Barahona, E., Lachica, M., Ure, A. M., et al. (2000). Application of a modified BCR sequential extraction (three-step) procedure for the determination of extractable trace metal contents in a sewage sludge amended soil reference material (CRM 483), complemented by a three-year stability study of acetic acid and EDTA extractable metal content. Journal of Environmental Monitoring, 2, 228–233.
Rauret, G., Lopez-Sanchez, J. F., Sahuquillo, A., Rubio, R., Davidson, C., Ure, A., et al. (1999). Improvement of the BCR three step sequential extraction procedure prior to the certification of new sediment and soil reference materials. Journal of Environmental Monitoring, 1, 57–61.
Senesi, G. S., Baldassare, G., Senesi, N., & Radina, B. (1999). Trace element inputs into soils by anthropogenic activities and implications for human health. Chemosphere, 39, 343–377.
Shuman, L. M. (1991). Chemical forms of micronutrients in soils. In R. J. Luxmoore (Ed.), Micronutrients in agriculture. Madison: SSSA.
Tokalioglu, S., Kartal, S., & Birol, G. (2003). Application of a three-stage sequential extraction procedure for the determination of extractable metal contents in highway soils. Turkish Journal of Chemistry, 27, 333–346.
Ure, A. M. (1996). Single extraction schemes for soil analysis and related applications. Science of the Total Environment, 178, 3–10.
Ure, A. M., & Davidson, C. M. (2002). Chemical speciation in soils and related materials by selective chemical extraction. In: A. M. Ure, & C. M. Davidson (Eds.), Chemical speciation in the environment (2nd ed.). Oxford: Blackwell.
Wang, X. L., Sato, T., Xing, B. S., & Tao, S. (2005). Health risks of heavy metals to the general public in Tianjin, China via consumption of vegetables and fish. Science of the Total Environment, 350, 28–37.
Yamane, T. (1973). Statistics: An introductory analysis (3rd ed.). New York: Harper & Pow.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Bakircioglu, D., Kurtulus, Y.B. & Ibar, H. Investigation of trace elements in agricultural soils by BCR sequential extraction method and its transfer to wheat plants. Environ Monit Assess 175, 303–314 (2011). https://doi.org/10.1007/s10661-010-1513-5
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10661-010-1513-5