The main results of development work and post-reactor studies of different structural materials for fuel-element cladding and hexahedral fuel-assembly jackets for sodium-cooled fast reactors are examined. Austenitic and ferritic-martensitic steels, including steel obtained by powder metallurgy, are examined as promising materials for fuel-element cladding for staged increase of fuel burnup.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
F. G. Reshetnikov, F. M. Mitenkov, and M. F. Troyanov, “Status of and prospects for radiation-resistant construction materials for the cores of fast reactors in the USSR,” in: Int. Conf. on Radiation Materials Engineering. Alushta, 1990, Vol. 1, pp. 15–23.
A. I. Karpenko, E. A. Kozmanov, A. N. Ogorodov, et al., “Operational properties of BN-600 reactor elements fabricated from EP-450 steel,” Vopr. At. Nauki Tekh., Ser. Materialoved. Nov. Mater., No. 1(64), 281–285 (2005).
A. V. Povstyanko, V. I. Prokhorov, A. E. Fedoseev, et al., “EP-450 steel as a material for fuel-element cladding in fast reactors,” in: Sci.-Techn. Conf. Dedicated to the 50th Anniversary of the Research Institute of Nuclear Reactors. Dimitrovgrad, 2006, pp. 35–44.
V. S. Khabarov, A. M. Dvoriashin, and S. I. Porollo, “The performance of time EP-450 ferritic-martensitic steel under neutron irradiation at low temperatures,” in: Proc. Techn. Comm. Meeting on Influence of High Dose Irradiation on Core Structural and Fuel Materials in Advanced Reactor, Obninsk, Russia, IAEA-TECDOC-1039 (1998), pp. 139–144.
A. V. Vatulin and A. V. Tselishev, “Structural steel for fast reactor cores,” Materialoved. Termich. Obrab. Mater., No. 11, 13–19 (2004).
V. N. Voevodin and I. M. Neklyudov, Evolution of the Structural-Phase State and Radiation Resistance of Structural Materials, Naukova Dumka, Kiev (12006).
A. V. Tselishev, V. S. Ageev,Yu. P. Budanov, et al., “Development and application of a microstructural approach for developing radiation-resistant austenitic steels,” Vopr. At. Nauki Tekh., Ser. Materialoved. Nov. Mater., No. 1(66), 304–312 (2006).
V. V. Maltsev, A. N. Ogorodov, V. F. Budanov, et al., “Optimization of the operation of fuel elements and fuel assemblies in the BN-600 reactor,” in: Int. Conf. on Radiation Materials Engineering. Alushta, 1990, pp. 105–112.
M. V. Bakanov, O. V. Kryukov,Yu. P. Budanov, et al., “Optimization of the structural state of the material of cladding tubes made of ChS-68 steel in the cold-deformed state,” Izv. Vyssh. Uchebn. Zaved. Yad. Energet., No. 1, 139–145 (2005).
A. G. Ioltukhovskii, M. V. Leontieva-Smirnova, N. B. Sokolov, et al., “Development 12% chromium steels of a new generation for nuclear power in Russia,” Vopr. At. Nauki Tekh., Ser. Materialoved. Nov. Mater., No. 1(64), 247–257 (2005).
M. V. Leontieva-Smirnova, A. N. Agafonov, G. N. Ermolaev, et al., “Microstructure and mechanical properties of low-activation ferritic-martensitic steel EK181 (RUSFER – EK181),” Perspekt. Mater., No. 6, 40–51 (2006).
V. S. Ageev, M. V. Leontyeva-Smirnova, A. A. Nikitina, et al., “Development of ODS ferritic-martensitic steels for innovative nuclear fast breeder reactors,” in: Int. Symp. on Structural Materials for Innovative Nuclear Systems. Karlsruhe, Germany, 2007, p. 125.
Author information
Authors and Affiliations
Additional information
Translated from Atomnaya Énergiya, Vol. 108, No. 4, pp. 217–222, April, 2010.
Rights and permissions
About this article
Cite this article
Tselishchev, A.V., Ageev, V.S., Budanov, Y.P. et al. Development of structural steel for fuel elements and fuel assemblies of sodium-cooled fast reactors. At Energy 108, 274–280 (2010). https://doi.org/10.1007/s10512-010-9289-9
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10512-010-9289-9