Abstract
According to the vulcanization kinetic equation of natural rubber (NR) established in the isothermal situation, the numerical computation expression of the degree of cure under non-isothermal condition is constructed by means of incremental method. The description of non-isothermal in-mold vulcanization process is carried out by the finite element method. The mold-opening time, the rubber and mold temperatures, the degree of rubber cure and its distribution characteristics are numerically analyzed, by changing the key formulas and parameters in the process including the temperature of curing medium, the concentration of 2-mercaptobenzothiazole, the heat transfer manner of mold side, and the convective heat transfer coefficient of heating boundary. The quantitative results will help engineers to design proper formulas and optimize processing conditions.
Article PDF
Similar content being viewed by others
Explore related subjects
Discover the latest articles, news and stories from top researchers in related subjects.Avoid common mistakes on your manuscript.
References
Ding, W.B., Wang, L., Yang, Q., Xiang, W.D., Gao, J.M. and Amer, W.A., Int. Polym. Proc., 2013, 28(2): 132
Rahimi, A. and Mashak, A., Plast., Rubber Compos., 2013, 42(6): 223
Aprem, A.S., Joseph, K. and Thomas, S., Rubber Chem. Technol., 2005, 78(3): 458
Jia, Y.X., Wang, X.X., Feng, L.G. and An, L.J., Eur. Polym. J., 2009, 45(6): 1759
Akiba, M. and Hashim, A.S., Prog. Polym. Sci. (Oxford), 1997, 22(3): 4751
Wang, X.X., Jia, Y.X., Feng, L.G. and An, L.J., Macromol. Theory Simul., 2009, 18: 268
Isayev, A.I. and Wan, M., Rubber Chem. Technol., 1998, 71(5): 1059
Han, I.S., Chung, C.B., Jeong, H.G., Kang, S.J., Kim, S.J. and Jung, H.C., J. Appl. Polym. Sci., 1999, 74(8): 2063
Ghoreishy, M.H.R. and Naderi, G., J. Elastomers Plast., 2005, 37(1): 37
Shojaei, A., Int. Polym. Proc., 2006, 21(4): 421
Bruger, T. and Broock, U.Von., Kautsch. Gummi Kunstst., 2007, 60(7/8): 368
Arrillaga, A., Zaldua, A.M., Atxurra, R.M. and Farid, A.S., Eur. Polym. J., 2007, 43(11): 4783
Yan, X.Q., Polym. J., 2007, 39(10): 1001
Nozu, S., Tsuji, H., Itadani, M., Fujiwara, W. and Ohnishi, K., J. Mater. Process. Technol., 2008, 201(1/3): 720
Jia, Y.X., Sun, S., Liu, L.L., Xue, S.X. and Zhao, G.Q., Polymer, 2003, 44(1): 319
Jia, Y.X., Sun, S., Xue, S.X., Liu, L.L. and Zhao, G.Q., Polymer, 2002, 43(26): 7515
Wang, P.Y., Qian, H.L., Yu, H.P. and Chen, J., J. Appl. Polym. Sci., 2003, 88(3): 680
Wang, P.Y., Qian, H.L. and Yu, H.P., J. Appl. Polym. Sci., 2004, 92(5): 3260
Wang, P.Y., Qian, H.L. and Yu, H.P., J. Appl. Polym. Sci., 2006, 101(1): 580
Incropera, F.P., Dewitt, D.P., Bergman, T.L. and Lavine, A.S., Fundamentals of Heat and Mass Transfer, Wiley, New York, 2007
Welty, J.R., Wicks, C.E., Wilson, R.E. and Rorrer, G., Fundamentals of Momentum, Heat and Mass Transfer, Wiley, New York, 2001
Choi, D., Kader, M.A., Cho, B.H., Huh, Y.I. and Nah, C., J. Appl. Polym. Sci., 2005, 98(4): 1688
Fan, R.L., Zhang, Y., Li, F., Zhang, Y.X., Sun, K. and Fan, Y.Z., Polym. Test., 2001, 20(8): 925
Ding, R. and Leonov, A.I., J. Appl. Polym. Sci., 1996, 61(3): 455
McCabe, W.L., Smith, J.C. and Harriott, P., Unit Operations of Chemical Engineering, McGraw-Hill, New York, 2001
Author information
Authors and Affiliations
Corresponding author
Additional information
This work was financially supported by the National Key Basic Research Program of China (2012CB821505), and the Natural Science Foundation of Shandong Province (No. JQ201016).
Rights and permissions
About this article
Cite this article
Wang, Dh., Dong, Q. & Jia, Yx. Mathematical modelling and numerical simulation of the non-isothermal in-mold vulcanization of natural rubber. Chin J Polym Sci 33, 395–403 (2015). https://doi.org/10.1007/s10118-015-1594-2
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10118-015-1594-2