Abstract
SBR compounds including the N-isopropyl-N′-phenyl-p-phenylenediamine-modified clay (organoclay) were prepared. Effects of modified clay and antioxidant (IPPD) contents on mechanical and rheological properties of SBR composites were studied. FTIR results confirmed that the clay was chemically modified by IPPD and changed into an organoclay. X-ray diffraction (XRD) results confirmed the increase in interlayer distance of the clay due to the insertion of IPPD. Rheological and cure characteristics of SBR compounds were determined using RPA (Rubber Process Analyzer) and rheometer. Scorch time and cure time of SBR compounds decreased with introduction of the organoclay. Mechanical properties and heat aging resistance of the SBR composites were improved significantly by incorporation of the organoclay.
Article PDF
Similar content being viewed by others
Explore related subjects
Discover the latest articles, news and stories from top researchers in related subjects.Avoid common mistakes on your manuscript.
References
Al-Malaika, S., in “Handbook of polymer science and technology, performance properties of plastics and elastomers, Vol. 2”, ed. by Cheremisinoff, N.P., Marcel Dekker Inc., New York & Basel, 1989, p. 261
Scott, G., “Stabilization and degradation of polymers”, American Chemical Society, Washington, 1978
Al-Malaika, S. and Scott, G., Eur. Polym. J., 1980, 16: 709
Scott, G., “Developmets in polymer stabilization”, Applied Science, London, 1981
Pospisil, J., in “Developments in polymer stabilization, Vol. 7”, ed. by Scott, G., Elsevier Applied Science, London, 1984, p. 1
Helaly, F.M., Darwich, W.M. and Ghaffar, A., Polym. Degrad. Stab., 1999, 64: 251
Das, A., Naskar, N. and Kumar Basu, D., J. Appl. Polym. Sci., 2004, 91: 1913
Ismail, M.N., Yehia, A.A. and Korium, A.A., J. Appl. Polym. Sci., 2002, 83: 2984
Badran, B.M., Younan, A.F., Ismail, M.N. and Shehata, A.B., Elastomerics, 1990, 122(2): 26
Younan, A.F., Al-Kobtan, A.F. and Badran, B.M., J. Appl. Polym. Sci., 1993, 49: 1123
Shehata, A.B., Lawandy, S.N. and El-wakeel, A.A., Polym. Plast. Technol. Eng., 2000, 39(1): 1
Ismail, M.N., Abd EI Ghaffar, M.A., Shaffei, K.A. and Mohamed, N.A., Polym. Degrad. Stab., 1999, 63: 377
Sabaa, M.W., Madkour, T.M. and Yassin, A.A., Polym. Degrad. Stab., 1988, 22: 205
El-Wakil, A.A., J. Appl. Polym. Sci., 2006, 101: 843
El-Wakil, A.A., Polym. Plast. Technol. Eng., 2007, 46: 661
Kim, T.H. and Oh, D.R., Polym. Degrad. Stab., 2004, 84: 499
Saelao, J. and Phinyocheep, P., J. Appl. Polym. Sci., 2005, 95: 28
Nakason, C., Kaesaman, A. and Supasanthitikul, P., Polym. Testing, 2004, 23: 35
Abd El-Ghaffar, M.A., El-Nashar, D.E. and Youssef, E.A.M., Polym. Degrad. Stab., 2003, 82: 47
Kuriakose, A.P. and Rajendran, G., Iranian Polym. J., 2000, 9: 89
Gopakumar, T.G., Lee, J.A., Kontopoulou, M. and Parent, J.S., Polymer, 2002, 43: 5483
Shehata, A.B., Nasr, A. and Farouk, T., Polym. Plastic. Technol. Eng., 2005, 44: 1281
Schacht, H.T., 2003, W.O. Pat., WO/2003/066938
Kloprogge, J.T. and Frost, R.L., Vib. Spectrosc., 2000, 23: 119
Kloprogge, J.T. and Frost, R.L., Appl. Clay Sci., 1999, 15: 431
Naderi, G., Lafleur, P.G. and Dubois, C., Polym. Eng. Sci., 2007, 47: 207
Rosamma, A. and Changwoon, N., J. Appl. Polym. Sci., 2006, 102(4): 3277
Naderi, G., Lafleur, P.G. and Dubois, C., Int. Polym. Proc., 2007, 22: 284
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Baharvand, H., Naderi, G. & Soltani, S. SBR composites reinforced with N-isopropyl-N′-phenyl-P-phenylenediamine-modified clay. Chin J Polym Sci 29, 191–196 (2011). https://doi.org/10.1007/s10118-010-1017-3
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10118-010-1017-3