Abstract
The lumber from sugi plantations in Japan displays large intra- and intertree variation in mechanical properties, even within a stand. These variations seem to be induced by the effects of the characteristics of cultivars as well as the effects of growth traits on mechanical properties. Therefore, the effects of growth traits on mechanical properties per cultivar need to be precisely examined. In this study, we focused on the effects of growth traits, especially height-to-diameter ratio (H/D ratio), on stem stiffness per cultivar. Sixteen cultivars were classified into three groups according to the relationships between stem stiffness and growth traits. In cultivars that showed a close correlation between growth traits and stem stiffness, it was assumed that stem stiffness could be controlled to a certain extent by silvicultural practices using the H/D ratio as an indicator. In cultivars that showed a weak correlation between growth traits and stem stiffness, selecting cultivars for the production of logs with higher mechanical properties seemed to be effective; in this study, Kumotoshi, Tanoaka, and Edanaga were found to be suitable. Tree age and site index may be important factors for producing wood with higher mechanical properties.
Article PDF
Similar content being viewed by others
References
Fujisawa Y, Ohta S, Nishimura K, Tajima M (1992) Wood characteristics and genetic variations in sugi (Cryptomeria japonica): clonal differences and correlations between locations of dynamic moduli of elasticity and diameter growths in plus-tree clones. Mokuzai Gakkaishi 38:638–644
Fujisawa Y, Ohta S, Nishimura K, Toda T, Tajima M (1994) Wood characteristics and genetic variations in sugi (Cryptomeria japonica). III. Estimation of variance components of the variation in dynamic modulus of elasticity with plus-trees clones. Mokuzai Gakkaishi 40:457–464
Fujisawa Y, Ohta S, Tajima M (1993) Wood characteristics and genetic variations in sugi (Cryptomeria japonica). II. Variation in growth ring components among plus-trees clones and test stands. Mokuzai Gakkaishi 39:875–882
Hirakawa Y, Fujisawa Y (1995) The relationships between microfibril angles of the S2 layer and latewood tracheid length in elite sugi (Cryptomeria japonica) clones (in Japanese). Mokuzai Gakkaishi 41:123–131
Tsushima S, Koga S, Oda K, Shiraishi S (2005) Growth and wood properties of sugi (Cryptomeria japonica) cultivars planted in the Kyusyu region (in Japanese). Mokuzai Gakkaishi 51:394–401
Yamashita K, Hirakawa Y, Fujisawa Y, Nakada R (2000) Effects of microfibril angle and density on variation of modulus of elasticity of sugi (Cryptomeria japonica) logs among eighteen cultivars (in Japanese). Mokuzai Gakkaishi 46:510–522
Yamashita K, Hirakawa Y, Nakatani H, Ikeda M (2009) Longitudinal shrinkage variations within trees of sugi (Cryptomeria japonica) cultivars. J Wood Sci 55:1–7
Yamashita K, Hirakawa Y, Nakatani H, Ikeda M (2009) Tangential and radial shrinkage variation within trees in sugi (Cryptomeria japonica) cultivars. J Wood Sci 55:161–168
Wang SY, Lin SH (1996) Effects of plantation spacings on the quality of visually graded lumber and mechanical properties of Taiwan-grown Japanese cedar. Mokuzai Gakkaishi 42:435–444
Wang SY, Ko CY (1998) Dynamic modulus of elasticity and bending properties of large beams of Taiwan-grown Japanese cedar from different plantation spacing sites. J Wood Sci 44:62–68
Ishiguri F, Kasai S, Yokota S, Iizuka K, Yoshizawa N (2005) Wood quality of sugi (Cryptomeria japonica) grown at four initial spacings. IAWA J 26:375–386
Fujisawa Y, Ohta S, Akashi T (1995) Wood characteristics and genetic variations in sugi (Cryptomeria japonica). IV. Variation in growth ring features of plus-trees clones in relation to the initial planting space (in Japanese). Mokuzai Gakkaishi 41:631–639
Tsushima S, Koga S, Oda K, Shiraishi S (2006) Effects of initial spacing on growth and wood properties of sugi (Cryptomeria japonica) cutting cultivars (in Japanese). Mokuzai Gakkaishi 52:196–205
Takata K, Teraoka Y (2002) Genotypic effects on the variation of wood quality and growth traits in plantation forest made by cutting cultivars of Japanese cedar. J Wood Sci 48:106–113
Watt MS, Moore JR, Facon J, Downes GM, Clinton PW, Coker G, Davis MR, Simcock R, Parfitt RL, Dando J, Mason EG, Bown HE (2006) Modelling the influence of stand structural, edaphic and climatic influences on juvenile Pinus radiata dynamic modulus of elasticity. Forest Ecol Manag 229:136–144
Mason EG (2006) Interactions between influences of genotype and grass competition on growth and wood stiffness of juvenile radiata pine in a summer-dry environment: Can J For Res 36:2454–2463
Li X, Huber DA, Powell GL, White TL, Peter GF (2007) Breeding for improved growth and juvenile corewood stiffness in slash pine. Can J For Res 37:1886–1893
Kijidani Y, Kitahara R (2009) Variation of wood properties with height position in the stems of Obi-sugi cultivars (in Japanese). Mokuzai Gakkaishi 55:198–206
Koizumi A, Ueda K (1986) Estimation of the mechanical properties of standing trees by non-destructive bending test (in Japanese). Mokuzai Gakkaishi 33:669–676
Author information
Authors and Affiliations
Corresponding author
About this article
Cite this article
Kijidani, Y., Hamazuna, T., Ito, S. et al. Effect of height-to-diameter ratio on stem stiffness of sugi (Cryptomeria japonica) cultivars. J Wood Sci 56, 1–6 (2010). https://doi.org/10.1007/s10086-009-1060-2
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10086-009-1060-2