Abstract
It is generally appreciated that the mechanical behavior of granular media depends fundamentally on the interaction of the constituent particles, and that the validity of numerical models of granular media would be greatly improved with knowledge of the grain-scale mechanics. However, most supporting experimental work has been conducted on highly idealized materials, and a limited amount of information exists on grain-scale force–displacement relationships for naturally occurring materials. To address this shortcoming, we are conducting a program that integrates laboratory experiments on grains of naturally occurring aggregate with the discrete element modeling method, with the goal of relating the grain-scale physical and mechanical properties of granular media to bulk behavior. The paper describes the equipment and methods that have been developed to conduct close-loop controlled, grain-scale experiments under monotonic and cyclic loading conditions, and presents results from an initial set of experiments on unbonded grains. The implications of the grain-scale results to the discrete element model are discussed. Discussions center on the applicability of a physically based approach to the mechanics of granular media in general. In light of future exploration missions and the resulting need to predict the mechanical properties of lunar and planetary regoliths, the paper examines the potential usefulness of our physically based approach to the problem of predicting the behavior of the types of materials found in those environments.
Article PDF
Similar content being viewed by others
Explore related subjects
Discover the latest articles, news and stories from top researchers in related subjects.Avoid common mistakes on your manuscript.
References
Arthur J.F., Chua S., Dunstan T. and Rodriguez del C.J.I. (1980). Principal stress rotation: a missing parameter. J. Geotechn. Eng. Div. ASCE 106(No GT4): 419–433
Carpick R.W., Ogletree D.F. and Salmeron M. (1997). Lateral a new nanomechanical measurement for the determination of shear strengths with friction force microscopy. Appl. Phys. Lett. 70(12): 1548–1550
Cole D.M. (1995). A model for the anelastic straining of saline ice subjected to cyclic loading. Phil. Mag. A. 72(1): 230–239
Cole D.M. (2004). A dislocation-based model for creep recovery in ice. Phil. Mag. 84(30): 3217–3234
Cole D.M. and Durell G.D. (1995). The cyclic loading of saline ice. Phil. Mag. 72(1): 209–229
Cole D.M. and Durell G.D. (2001). A dislocation-based analysis of strain history effects in ice. Phil. Mag. A. 81(7): 1849–1872
Cundall P.A. and Strack O.D.L. (1979). A discrete numerical model for granular assemblies. Geotechnique 29(1): 47–65
D’Addetta G.A. (2004). Discrete model for cohesive frictional materials. Institute für Baustatik der Universität Stuttgart, Germany, Ph.D. Thesis, Bericht Nr. 42
D’Addetta G.A. and Ramm E. (2006). A microstructure-based simulation environment on the basis of an interface enhanced particle model. Granul. Matter 8: 159–174
Gardiner B.S. and Tordesillas A. (2004). Micromechanics of shear bands. Int. J. Solids Struct. 41(21): 5885–5901
Goldenberg C. and Goldhirsch I. (2002). Force chains, microelasticity and macroelasticity. Phys. Rev. Lett. 89: 084320
Goldenberg C. and Goldhirsch I. (2005). Friction enhances elasticity in granular solids. Nature 435: 188–191
Grierson D.S., Flater E.E. and Carpick R.W. (2005). Accounting for the JKR-DMT transition in adhesion and friction measurements with atomic force microscopy. J. Adhes. Sci. Technol. 19(3–5): 291–311
Horne H.M. and Deere D.U. (1962). Frictional characteristics of minerals. Geotechnique 12: 319–335
Kappl M., Heim L., Butt H.-J., Luding S., Tykhoniuk R. and Tomas J. (2005). From grains to powders: from single particle contact mechanics measurements to bulk powder properties. In: Garcia-Rojo, R., Herrmann, H.J., and McNamara, S. (eds) Powders and grains 2005, Stuttgart, July 2005, pp 493–497. Balkema, Leiden
Majmudar T.S. and Behringer R.P. (2005). Contact force measurements and stress-induced anisotropy in granular materials. Nature 435: 1079–1082
Mindlin R.D. and Deresiewicz H. (1953). Elastic spheres in contact under varying oblique forces. ASME J. Appl. Mech. 20: 327–344
Nowick A.S. and Berry B.S. (1972). Anelastic relaxation in crystalline solids. Academic, New York, 677
Oda M. and Kazama H. (1998). Microstructure of shear bands and its relation to the mechanisms of dilatancy and failure of dense granular soils. Geotechnique 48(4): 465–481
Oda M., Konishi J. and Nemat-Nasser S. (1982). Experimental miomechanical evaluation of strength of granular materials: effects of particle rolling. Mech. Mater. 1: 269–283
Peters J.F., Muthuswamy M., Wibowo J. and Tordesillas A. (2005). Characterization of force chains in granular material. Phys. Rev. E. 72(4): 041307
Potyondy D.O. and Cundall P.A. (2004). A bonded-particle model for rock. Int. J. Rock Mech. Min. Sci. 41: 1329–1364
Tordesillas A., Walsh S.D.C. and Gardiner B.S. (2000). Bridging the length scales: micromechanics of granular media. Bit Numer. Math. 44(3): 539–556
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Cole, D.M., Peters, J.F. A physically based approach to granular media mechanics: grain-scale experiments, initial results and implications to numerical modeling. Granular Matter 9, 309–321 (2007). https://doi.org/10.1007/s10035-007-0046-2
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10035-007-0046-2