Abstract
A four-variable plate model is successfully extended here to investigate the thermal buckling analysis of advanced nanoplates. The advanced nanoplate is fabricated from a functionally graded material mixed of ceramic and metal with continuously varying material properties through the nanoplate thickness. Two types of thermal loadings, uniform and nonlinear temperature rises along the nanoplate thickness are taken into consideration. The present model contains four unknown functions as against five or more in other alternative models. The through-the-thickness distributions of transverse shear stresses of the nanoplate are considered to vary parabolically and vanish at upper and lower surfaces. The present model does not require any problem-dependent shear correction factor. Comparison examples are made between results obtained via this model and those via available solutions in the literature.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
Koizumi, M.: FGM activities in Japan. Composites B 28, 1–4 (1997)
Suresh, S., Mortensen, A.: Fundamentals of Functionally Graded Materials. Barnes and Noble Publications, New York (1998)
Javaheri, R., Eslami, M.R.: Thermal buckling of functionally graded plates based on higher-order theory. J. Therm. Stress. 25, 603–625 (2002)
Lanhe, W.: Thermal buckling of a simply supported moderately thick rectangular FGM plate. Compos. Struct. 64, 211–218 (2004)
Matsunaga, H.: Thermal buckling of functionally graded plates according to a 2D higher-order deformation theory. Compos. Struct. 90, 76–86 (2009)
Zenkour, A.M., Sobhy, M.: Thermal buckling of various types of FGM sandwich plates. Compos. Struct. 93, 93–102 (2010)
Zenkour, A.M., Mashat, D.S.: Thermal buckling analysis of ceramic–metal functionally graded plates. Nat. Sci. 2, 968–978 (2010)
Malekzadeh, P.: Three-dimensional thermal buckling analysis of functionally graded arbitrary straight-sided quadrilateral plates using differential quadrature method. Compos. Struct. 93, 1246–1254 (2011)
Zenkour, A.M., Sobhy, M.: Thermal buckling of functionally graded plates resting on elastic foundations using the trigonometric theory. J. Therm. Stress. 34, 1119–1138 (2011)
Bodaghi, M., Saidi, A.R.: Thermoelastic buckling behavior of thick functionally graded rectangular plates. Arch. Appl. Mech. 81, 1555–1572 (2011)
Mirzavand, B., Eslami, M.R.: A closed-form solution for thermal buckling of piezoelectric FGM rectangular plates with temperature-dependent properties. Acta Mech. 218, 87–101 (2011)
Bouiadjra, M.B., Houari, M.S.A., Tounsi, A.: Thermal buckling of functionally graded plates according to a four-variable refined plate theory. J. Therm. Stress. 35, 677–694 (2012)
Kiani, Y., Eslami, M.R.: Thermal buckling and post-buckling response of imperfect temperature-dependent sandwich FGM plates resting on elastic foundation. Arch. Appl. Mech. 82, 891–905 (2012)
Akavci, S.S.: Thermal buckling analysis of functionally graded plates on an elastic foundation according to a hyperbolic shear deformation theory. Mech. Compos. Mater. 50, 197–212 (2014)
Fazzolari, F.A., Carrera, E.: Thermal stability of FGM sandwich plates under various through-the-thickness temperature distributions. J. Therm. Stress. 37, 1449–1481 (2014)
Shaterzadeh, A.R., Rezaei, R., Abolghasemi, S.: Thermal buckling analysis of perforated functionally graded plates. J. Therm. Stress. 38, 1250–1268 (2015)
Yaghoobi, H., Fereidoon, A., Nouri, M.K., Mareishi, S.: Thermal buckling analysis of piezoelectric functionally graded plates with temperature-dependent properties. Mech. Adv. Mater. Struct. 22, 864–875 (2015)
Mirzavand, B., Bohlooly, M.: Thermal buckling of piezolaminated plates subjected to different loading conditions. J. Therm. Stress. 38, 1138–1162 (2015)
Bouhadra, A., Benyoucef, S., Tounsi, A., Bernard, F., Bouiadjra, R.B., Houari, M.S.A.: Thermal buckling response of functionally graded plates with clamped boundary conditions. J. Therm. Stress. 38, 630–650 (2015)
Ebrahimi, F., Ehyaei, J., Babaei, R.: Thermal buckling of FGM nanoplates subjected to linear and nonlinear varying loads on Pasternak foundation. Adv. Mater. Res. 5, 245–261 (2016)
Barati, M.R., Zenkour, A.M., Shahverdi, H.: Thermo-mechanical buckling analysis of embedded nanosize FG plates in thermal environments via an inverse cotangential theory. Compos. Struct. 141, 203–212 (2016)
Thang, P.T.: Analytical solution for thermal buckling analysis of rectangular plates with functionally graded coatings. Aerosp. Sci. Technol. 55, 465–473 (2016)
Narendar, S., Gopalakrishnan, S.: Scale effects on buckling analysis of orthotropic nanoplates based on nonlocal two-variable refined plate theory. Acta Mech. 223, 395–413 (2012)
Wang, Y.-Z., Cui, H.-T., Li, F.-M., Kishimoto, K.: Thermal buckling of a nanoplate with small-scale effects. Acta Mech. 224, 1299–1307 (2013)
Ansari, R., Gholami, R., Faghih Shojaei, M., Mohammadi, V., Darabi, M.A.: Thermal buckling analysis of a Mindlin rectangular FGM microplate based on the strain gradient theory. J. Therm. Stress. 36, 446–465 (2013)
Zenkour, A.M., Sobhy, M.: Nonlocal elasticity theory for thermal buckling of nanoplates lying on Winkler–Pasternak elastic substrate medium. Physica E 53, 251–259 (2013)
Nami, M.R., Janghorban, M., Damadam, M.: Thermal buckling analysis of functionally graded rectangular nanoplates based on nonlocal third-order shear deformation theory. Aerosp. Sci. Technol. 41, 7–15 (2015)
Ebrahimi, F., Barati, M.R.: Temperature distribution effects on buckling behavior of smart heterogeneous nanosize plates based on nonlocal four-variable refined plate theory. Int. J. Smart Nano Mater. 7, 119–143 (2016)
Farajpour, A., Haeri Yazdi, M.R., Rastgoo, A., Mohammadi, M.: A higher-order nonlocal strain gradient plate model for buckling of orthotropic nanoplates in thermal environment. Acta Mech. 227, 1849–1867 (2016)
Eringen, A.C., Edelen, D.G.B.: On nonlocal elasticity. Int. J. Eng. Sci. 10, 233–248 (1972)
Eringen, A.C.: On differential equations of nonlocal elasticity and solutions of screw dislocation and surface waves. J. Appl. Phys. 54, 4703–4710 (1983)
Eringen, A.C.: Nonlocal Continuum Field Theories. Springer, New York (2002)
Mohammadi, M., Farajpour, A., Moradi, A., Ghayour, M.: Shear buckling of orthotropic rectangular graphene sheet embedded in an elastic medium in thermal environment. Composites B 56, 629–637 (2014)
Praveen, G.N., Reddy, J.N.: Nonlinear transient thermoelastic analysis of functionally graded ceramic-metal plates. Int. J. Solids Struct. 35, 4457–4476 (1998)
Reddy, J.N., Chin, C.D.: Thermoelastical analysis of functionally graded cylinder and plates. J. Therm. Stress. 21, 593–626 (1998)
Thai, H.T., Choi, D.H.: An efficient and simple refined theory for buckling analysis of functionally graded plates. Appl. Math. Model. 36, 1008–1022 (2012)
Mechab, I., Atmane, H.A., Tounsi, A., Belhadj, H.A., Bedia, E.A.A.: A two variable refined plate theory for the bending analysis of functionally graded plates. Acta. Mech. Sin. 26, 941–949 (2010)
Javaheri, R., Eslami, M.R.: Thermal buckling of functionally graded plates based on higher order theory. J. Therm. Stress. 25, 603–625 (2002)
Bouazza, M., Becheri, T., Boucheta, A., Benseddiq, N.: Thermal buckling analysis of nanoplates based on nonlocal elasticity theory with four-unknown shear deformation theory resting on Winkler–Pasternak elastic foundation. Int. J. Comput. Methods Eng. Sci. Mech. 17, 362–373 (2016)
Author information
Authors and Affiliations
Corresponding authors
Rights and permissions
About this article
Cite this article
Bouazza, M., Zenkour, A.M. & Benseddiq, N. Closed-from solutions for thermal buckling analyses of advanced nanoplates according to a hyperbolic four-variable refined theory with small-scale effects. Acta Mech 229, 2251–2265 (2018). https://doi.org/10.1007/s00707-017-2097-8
Received:
Revised:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00707-017-2097-8