Abstract
We consider the internal stress field of a three-phase elliptical inclusion bonded to an infinite matrix through an interphase layer when the matrix is subjected to remote uniform stresses. The elastic materials comprising all the three phases belong to a particular class of harmonic materials, and the formed interfaces are two confocal ellipses. A condition leading to internal uniform hydrostatic stresses is derived. This condition relates the two remote principal stresses with the geometric parameters (the thickness of the interphase layer and the aspect ratio of the elliptical inclusion) of the three-phase elliptical inclusion. When this condition is met, the hoop stress in the interphase layer along the entire interphase/inclusion interface is also uniform. Five special situations of practical importance are discussed in considerable detail to demonstrate the unique phenomena inherent in harmonic materials. Our discussions indicate that when this condition is met, it is permissible for the two remote principal stresses to have opposite signs and that for given geometric and material parameters, the remote loading ratio is no longer constant and multiple external loading states exist leading to internal uniform hydrostatic stresses. It is found that this condition can be written into a hyperbola for the two remote principal stresses when the interphase layer is extremely compliant or relatively stiff or when the inclusion is almost rigid. When the magnitudes of the remote stresses are sufficiently large, this condition becomes a very simple one relating the remote loading ratio with the geometric parameters of the composite. Interestingly, it is clearly observed from the simple condition that for given geometric parameters of the three-phase elliptical inclusion, there exist two different values of the remote loading ratio, both of which lead to an internal uniform hydrostatic stress state.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
Ru C.Q.: Three-phase elliptical inclusions with internal uniform hydrostatic stresses. J. Mech. Phys. Solids 47, 259–273 (1999)
Christensen R.M., Lo K.H.: Solutions for effective shear properties in three-phase sphere and cylinder models. J. Mech. Phys. Solids 27, 315–330 (1979)
Luo H.A., Weng G.J.: On Eshelby’s S-tensor in a three-phase cylindrically concentric solid and the elastic moduli of fiber-reinforced composites. Mech. Mater. 8, 77–88 (1989)
Bjorkman G.S., Richards R.: Harmonic holes-an inverse problem in elasticity. ASME J. Appl. Mech. 43, 414–418 (1976)
Wheeler L.T.: Stress minimum forms for elastic solids. Appl. Mech. Review 45, 1–11 (1992)
Wang G.F., Schiavone P., Ru C.Q.: Harmonic shapes in finite elasticity under nonuniform loading. ASME J. Appl. Mech. 72, 691–694 (2005)
Ru C.Q.: On complex-variable formulation for finite plane elastostatics of harmonic materials. Acta Mech. 156, 219–234 (2002)
Varley E., Cumberbatch E.: Finite deformation of elastic materials surrounding cylindrical hole. J. Elast. 10, 341–405 (1980)
Li X., Steigmann D.J.: Finite plane twist of an annular membrane. Q. J. Mech. Appl. Math. 46, 601–625 (1993)
Ru C.Q., Schiavone P., Sudak L.J., Mioduchowski A.: Uniformity of stresses inside an elliptical inclusion in finite elastostatics. Int. J. Nonlinear Mech. 40, 281–287 (2005)
Muskhelishvili N.I.: Some Basic Problems of the Mathematical Theory of Elasticity. Noordhoff, Groningen (1953)
Knowles J.K., Sternberg E.: On the singularity induced by certain mixed boundary conditions in linearized and nonlinear elastostatics. Int. J. Solids Struct. 11, 1173–1201 (1975)
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Wang, X. Three-phase elliptical inclusions with internal uniform hydrostatic stresses in finite plane elastostatics. Acta Mech 219, 77–90 (2011). https://doi.org/10.1007/s00707-010-0432-4
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00707-010-0432-4