Abstract
This contribution presents a newly developed phenomenological model to describe the curing process of thermosets undergoing small strain deformations. The governing equations are derived from a number of physical and chemical presuppositions and details of the numerical implementation within the finite element method are given. The curing of thermosets is a very complex process involving a series of chemical reactions which result in the conversion of liquid low molecular weight monomer mixtures into highly cross-linked solid macromolecular structures. This phase transition from a viscous fluid to a viscoelastic solid can be modelled by a constitutive relation which is based on a temporal evolution of shear modulus and relaxation time. Some numerical examples demonstrate the capability of the model to correctly represent the evolution of elastic and inelastic material properties as well as the volume shrinkage taking place during the curing process.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
Hubert P, Johnston A, Poursartip A, Nelson K (2001) Cure kinetics and viscosity models for Hexcel 8552 epoxy resin. In: Proceedings of the 46th international SAMPE symposium. Long Beach, CA, pp 2341–2354
Lion A, Höfer P (2007) On the phenomenological representation of curing phenomena in contiuum mechanics. Arch Mech 59: 59–89
Kiasat M (2000) Curing shrinkage and residual stresses in viscoelastic thermosetting resins and composites. PhD Thesis, TU Delft, Netherlands
Ruiz E, Trochu F (2005) Thermomechanical properties during cure of glass-polyester RTM composites: elastic and viscoelastic modeling. J Compos Mater 39: 881–916
Ernst LJ, van’t Hof C, Yang DG, Kiasat M, Zhang GQ, Bressers HJL, Caers JFJ, den Boer AWJ, Janssen J (2002) Mechanical modeling and characterization of the curing process of underfill materials. J Electron Packag 124: 97–105
O’Brien DJ, Mather PT, White SR (2001) Viscoelastic properties of an epoxy resin during cure. J Compos Mater 35: 883–904
Lange J (1999) Viscoelastic properties and transitions during thermal and UV cure of a methacrylate resin. Polym Eng Sci 39: 1651–1660
Eom Y, Boogh L, Michaud V, Sunderland P, Manson JA (2000) Time-cure-temperature superposition for the prediction of instantaneous viscoelastic properties during cure. Polym Eng Sci 40: 1281–1292
Suzuki K, Miyano Y (1977) Change of viscoelastic properties of epoxy resin in the curing process. J Appl Polym Sci 21: 3367–3379
Matsuoka S, Quan X, Bair HE, Boyle DJ (1989) A model for the curing reaction of epoxy resins. Macromolecules 22: 4093–4098
White SR, Hahn HT (1992) Process modeling of composite materials: residual stress development during cure. Part I. Model formulation. J Compos Mater 26: 2402–2422
Antonucci V, Cusano A, Giordano M, Nasser J, Nicolais L (2006) Cure-induced residual strain build-up in a thermoset resin. Compos Part A Appl Sci Manuf 37: 592–601
Chen Y, Xia Z, Ellyin F (2001) Evolution of residual stresses induced during curing processing using a viscoelastic micromechanical model. J Compos Mater 36: 522–542
Adolf DB, Chambers RS (2007) A thermodynamically consistent, nonlinear viscoelastic approach for modeling thermosets during cure. J Rheol 51: 23–50
Hojjati M, Johnston A, Hoa SV, Denault J (2004) Viscoelastic behaviour of Cytec FM73 adhesive during cure. J Appl Polym Sci 91: 2548–2557
Kim YK, White SR (1996) Stress relaxation behaviour of 3501-6 epoxy resin during cure. Polym Eng Sci 36: 2852–2862
Thomas R, Durix S, Sinturel C, Omonov T, Goossens S, Groeninckx G, Moldenaers P, Thomas S (2007) Cure kinetics, morphology and miscibility of modified DGEBA-based epoxy resin - effects of a liquid rubber inclusion. Polymer 48: 1695–1710
Han HG, Kim WG, Yoon HG, Moon TJ (1998) Curing reaction of biphenyl epoxy resin with different phenolic functional hardeners. J Polym Sci Part A Polym Chem 36: 773–783
Karkanas PI, Partridge IK (1996) Modelling the cure of a commercial epoxy resin for applications in resin transfer moulding. Polym Int 41: 183–191
van’t Hof C (2006) Mechanical characterization and modeling of curing thermosets. PhD Thesis, TU Delft, Netherlands
Adolf DB, Martin JE (1996) Calculation of stresses in crosslinking polymers. J Compos Mater 30: 13–34
Adolf DB, Chambers RS (1997) Verification of the capability for quantitative stress prediction during epoxy cure. Polymer 38: 5481–5490
Adolf DB, Martin JE, Chambers RS, Burchett SN, Guess TR (1998) Stresses during thermoset cure. J Mater Res 13: 530–550
Adolf DB, Chambers RS, Caruthers JM (2004) Extensive validation of a thermodynamically consistent, nonlinear viscoelastic model for glassy polymers. Polymer 45: 4599–4621
Haupt P, Lion A (2002) On finite linear viscoelasticity of incompressible isotropic materials. Acta Mech 159: 87–124
Lion A (1998) Thixotropic behaviour of rubber under dynamic loading histories: experiments and theories. J Mech Phys Solids 46: 895–930
Lion A (1997) On the large deformation behaviour of reinforced rubber at different temperatures. J Mech Phys Solids 45: 1805–1834
Gillen KT (1988) Effect of cross-links which occur during continuous chemical stress-relaxation. Macromolecules 21: 442–446
Simo JC, Hughes TJR (1998) Computational inelasticity. Springer, New York
Hill RR, Muzumdar SV, Lee LJ (1995) Analysis of volumetric changes of unsaturated polyester resins during curing. Polym Eng Sci 35: 852–859
Simon SL, McKenna GB, Sindt O (2000) Modeling the evolution of the dynamic mechanical properties of a commercial epoxy resin during cure after gelation. J Appl Polym Sci 76: 495–508
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Hossain, M., Possart, G. & Steinmann, P. A small-strain model to simulate the curing of thermosets. Comput Mech 43, 769–779 (2009). https://doi.org/10.1007/s00466-008-0344-5
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00466-008-0344-5