2
has been used for smoothing of rough InAs, InP, and InSb surfaces, prepared by argon ion beam etching (IBE). The evolution of the surface roughness and morphology has been studied by atomic force microscopy (AFM) as a function of the N2 RIBE process parameters (ion beam energy, ion beam angle of incidence, and ion dose). A drastic improvement of the surface roughness has been observed for ion beam angles near normal incidence and larger than 70° with increasing ion doses. By using this technique, the initial root-mean-square (rms) roughness of, e.g., InSb of about 40 nm could be decreased to about 1 nm.
Article PDF
Avoid common mistakes on your manuscript.
Author information
Authors and Affiliations
Additional information
Received: 20 March 1998/Accepted: 24 March 1998
Rights and permissions
About this article
Cite this article
Frost, F., Schindler, A. & Bigl, F. Ion beam smoothing of indium-containing III-V compound semiconductors . Appl Phys A 66, 663–668 (1998). https://doi.org/10.1007/s003390050730
Issue Date:
DOI: https://doi.org/10.1007/s003390050730