Abstract
An early indication of groundwater contamination occurs when pollutant concentrations start to fluctuate and exceed background values of ambient fresh groundwater. An analysis of a characteristic situation of this type uses data from Israel's coastal phreatic granular aquifer. The pollutant is generally seawater, and the contamination process involves replacement of freshwater by encroaching sea- or other saltwater, a process augmented by human activity. The contamination process involves three stages: (1) groundwater composition remains relatively stable with small salinity content; (2) small salinity changes are perceptible with reversible fluctuations; and (3) salinity concentration increases at a sharply higher rate. The second stage is a useful early-indicator signal of contamination. Early-indicator signals of groundwater pollutant concentrations involve "minor" fluctuations in water chemistry at the advent of the contamination process. The intensity and magnitude of such a salinization/pollution process at any given location depends upon lithologic matrix, aquifer heterogeneity, and resultant flow domain characteristics, as well as contaminant properties. If such "signs" are detected at a sufficiently early stage, appropriate management steps may be taken to rectify further seawater and/or saltwater encroachment.
Article PDF
Similar content being viewed by others
Explore related subjects
Discover the latest articles, news and stories from top researchers in related subjects.Avoid common mistakes on your manuscript.
Author information
Authors and Affiliations
Additional information
Received: 23 July 1996 · Accepted: 25 June 1997
Rights and permissions
About this article
Cite this article
Melloul, A., Goldenberg, L. Early-indicator signals of groundwater contamination: the case of seawater encroachment. Environmental Geology 33, 279–288 (1998). https://doi.org/10.1007/s002540050247
Issue Date:
DOI: https://doi.org/10.1007/s002540050247