Abstract
The determination of neutralization potential (NP) of mining wastes is an essential part of waste characterization for acid rock drainage (ARD) prediction. Interpretation of NP values requires consideration of the mineralogical composition of the waste. Different minerals can neutralize acid drainage at different rates and in different pH ranges. The test conditions of widely used laboratory procedures to determine NP do not distinguish between such differences and overestimation of NP can often result. A simple procedure is proposed in which the effective NP is calculated based on mineralogical composition and the relative reactivities of component minerals. Mineralogical composition is calculated from easily determined analytical values using a CIPW normative procedure. Comparison of calculated NP values for 92 samples with experimentally determined values from tests designed to prevent the overestimation of NP indicates that the method is successful in predicting an effective NP value in most cases. The procedure is considered to be a cost-effective means of providing confident routine ARD prediction when used in combination with other tests and analyses.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
Author information
Authors and Affiliations
Additional information
Received: 1 August 1996 / Accepted: 11 November 1996
Rights and permissions
About this article
Cite this article
Lawrence, R., Scheske, M. A method to calculate the neutralization potential of mining wastes. Environmental Geology 32, 100–106 (1997). https://doi.org/10.1007/s002540050198
Issue Date:
DOI: https://doi.org/10.1007/s002540050198