Abstract
Bacterial degradation of sheets of selected polyhydroxyalkanoates by Comamonas sp., Pseudomonas lemoignei and Pseudomonas fluorescens GK13 is reported. Five natural polyhydroxyalkanoates were used, namely poly(3-hydroxybutyrate), poly(3-hydroxyvalerate), a copolymer of 3-hydroxybutyrate and 3-hydroxyvalerate, a copolymer of mainly 3-hydroxyoctanoate and minor amounts of 3-hydroxyhexanoate, and two rubber-like copolymers of saturated and unsaturated hydroxyalkanoic acids that had been modified by electron-beam-induced cross-linking. Each of these polymers was degraded by at least one bacterial strain, the rate of hydrolysis being dependent on the surface area of the polymer exposed to attack. Scanning electron microscopy of partially degraded samples showed that hydrolysis started at the surface and at physical lesions in the polymer and proceeded to the inner part of the material. No evidence for areas of non-degradable polymer was found for any of the polymers analysed, even if the polymer contained chemical cross-links.
Article PDF
Similar content being viewed by others
Explore related subjects
Discover the latest articles, news and stories from top researchers in related subjects.Avoid common mistakes on your manuscript.
Author information
Authors and Affiliations
Additional information
Received: 24 July 1996 / Accepted: 29 August 1996
Rights and permissions
About this article
Cite this article
Molitoris, H., Moss, S., de Koning, G. et al. Scanning electron microscopy of polyhydroxyalkanoate degradation by bacteria. Appl Microbiol Biotechnol 46, 570–579 (1996). https://doi.org/10.1007/s002530050863
Issue Date:
DOI: https://doi.org/10.1007/s002530050863