Abstract.
A new copper dispersed ceramic-graphite composite electrode was fabricated by the initial mixing of copper nitrate and (3-mercaptopropyl)trimethoxy silane (MPS) followed by stirring with graphite powder. The combination of the metal catalysis and the advantages of the ceramic composite favored the electrocatalytic reduction of hydrogen peroxide (H2O2) at a reduced overpotential of –0.2 V with good sensitivity, stability and reproducibility. The sensor showed a good linear response to H2O2 in the range from 8.3 × 10–6 M to 2.0 × 10–3 M with a correlation coefficient of 0.9989 and the detection limit was 6.2 × 10–6 M (S/N =3).
Article PDF
Avoid common mistakes on your manuscript.
Author information
Authors and Affiliations
Additional information
Electronic Publication
Rights and permissions
About this article
Cite this article
Ravi Shankaran, .D., Uehera, .N. & Kato, .T. Determination of hydrogen peroxide based on a metal dispersed sol-gel derived ceramic-graphite composite electrode. Anal Bioanal Chem 374, 412–415 (2002). https://doi.org/10.1007/s00216-002-1507-4
Received:
Revised:
Accepted:
Issue Date:
DOI: https://doi.org/10.1007/s00216-002-1507-4