Abstract
Stamping forming is a method of pressure processing that has been widely applied to automotive manufacturing, household electrical appliance production, aviation, and other fields. Stamping friction plays a substantial role in the quality of stamping forming and the service life of the die. However, the problem of friction in stamping forming has not yet been solved due to several critical difficulties. In particular, with the application of hot forming technology and new lightweight materials in stamping forming, such as advanced high-strength steel sheets, aluminum alloy sheets, and carbon fiber materials, stamping friction has become more complex. Therefore, it is of paramount practical significance to study stamping friction. In this paper, state of the art research concerning the mechanism and factors influencing friction in stamping forming is reviewed. Investigations of the friction mechanism are described, starting by introducing the development process of traditional and modern friction theory. The present friction mechanism fails to adequately describe the frictional process occurring in stamping forming due to complex and variable factors. A survey of existing works reveals several gaps in the study of factors that influence stamping forming: the friction model is very fragile; the accuracy is not high because only a few factors are considered; and more importantly, some important factors are often ignored, such as temperature and coating. Therefore, different dynamic friction models with multifactor coupling should be established for different stamping processes and materials to fully reflect the characteristics and mechanisms of stamping friction. The present review is aimed at providing an insight into the shortcomings of the existing research background, and it demonstrates the enormous potential for further investigation and innovation in the field of friction of stamping forming.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
Avitzur B (1990) A personal look on my involvement in the recent history of metal forming research. Advanced Technology of Plasticity 4. http://www.metalforming-inc.com/Publications/Papers/ref168/ref168.shtml
Amontons G (1699) De la resistance causée dans des machines, tant par les frottements des parties que les composent, que par la roideur des cordes qu’on y employe, et la maniere de calculer l’un el’autre. Académie Royale des Sciences, Paris, France, Troiséme (1732) edition: 206-222
Coulomb CA (1821) Théorie des machines simples, en ayant égard au frottement de leurs parties età roideur des cordages. Imprimerie de Huzard-Courcier, Rue du Jardinet, No 12, Paris, France, Nouvelle Édition edition
Desaguliers JT (1763) A Course of Experimental Philosophy, third edition, London: Printed for A. Millar , VoL 4
Bowden FP, Tabor D (1951) The friction and lubrication of solids. Am J Phys 19(7):428. https://doi.org/10.1119/1.1933017
Suh NP (1981) Update on the delamination theory of wear in fundamentals of friction and wear of materials. American Society for Metals, Ohio US
Eringen AC, DGB E (1972) On nonlocal elasticity. Int J Eng Sci 10(3):233–248. https://doi.org/10.1016/0020-7225(72)90039-0
Eringen AC (1983) Theories of nonlocal plasticity. Int J Eng Sci 21(7):741–751. https://doi.org/10.1016/0020-7225(83)90058-7
Oden JT, Pires EB (1983) Nonlocal and nonlinear friction laws and variational principles for contact problems in elasticity. J Appl Mech 50(1):67–76. https://doi.org/10.1115/1.3167019
Pires EB, Trabucho L (1990) The steady sliding problem with nonlocal friction. Int J Eng Sci 28(7):631–641. https://doi.org/10.1016/0020-7225(90)90091-V
Mahrenholtz O, Appeltauer J, Bontcheva N, Brzozowski M (1996) Nonlocal friction-application to rolling with spread. J Appl Math Mech-ZAMM 76(s4):603–605
Goryacheva IG (1998) Contactmechanics in tribology. Solid Mech Its Appl 51(2):135–142. https://doi.org/10.1007/978-94-015-9048-8
Lee EJ, Hwang HJ, Lee WG (2010) Morphology and toughness of abrasive particles and their effects on the friction and wear of friction materials: a case study with zircon and quartz. Tribol Lett 37(3):637–644. https://doi.org/10.1007/s11249-009-9561-0
Archard JF (1953) Contacts and rubbing of flat surfaces. J Appl Phys 24(8):981–988. https://doi.org/10.1063/1.1721448
Goddard J, Wilman H (1962) A theory of friction and wear during the abrasion of metals. Wear 5(2):114–135. https://doi.org/10.1016/0043-1648(62)90235-1
Suh NP (1977) An overview of the delamination theory of wear. Wear 44(1):1–16. https://doi.org/10.1016/0043-1648(77)90081-3
Wallbridge NC, Dowson D (1987) Distribution of wear rate data and a statistical approach to sliding wear theory. Wear 119(3):295–312. https://doi.org/10.1016/0043-1648(87)90037-8
Attia H (2009) A generalized fretting wear theory. Tribol Int 42(9):1380–1388. https://doi.org/10.1016/j.triboint.2009.04.010
Cora ON, Ağcayazı A, Namiki K, Sofuoğlu H, Koç M (2012) Die wear in stamping of advanced high strength steels—investigations on the effects of substrate material and hard coatings. Tribol Int 52(3):50–60. https://doi.org/10.1016/j.triboint.2012.02.016
Wang W, Zheng X, Hua M, Wei X (2016) Influence of surface modification on galling resistance of DC53 tool steel against galvanized advanced high strength steel sheet. Wear 360-361:1–13. https://doi.org/10.1016/j.wear.2016.04.021
Zeng Q, Yu F, Dong G (2012) Mechanism analysis of improved DLC films friction behaviors with liquid sulfidation treatment. Appl Surf Sci 259(15):83–92. https://doi.org/10.1016/j.apsusc.2012.06.105
Banerji A, Bhowmick S, Alpas AT (2014) High temperature tribological behavior of W containing diamond-like carbon (DLC) coating against titanium alloys. Surf Coat Tech 241(3):93–104. https://doi.org/10.1016/j.surfcoat.2013.10.075
Morita T, Hirano Y, Asakura K, Kumakiri T, Ikenaga M, Kagaya C (2012) Effects of plasma carburizing and DLC coating on friction-wear characteristics, mechanical properties and fatigue strength of stainless steel. Mat Sci Eng A-Struct 558(51):349–355. https://doi.org/10.1016/j.msea.2012.08.011
Lee BH, Keum YT, Wagoner RH (2002) Modeling of the friction caused by lubrication and surface roughness in sheet metal forming. J Mater Process Tech 130-131(02):60–63. https://doi.org/10.1016/S0924-0136(02)00784-7
Achanta S, Drees D, Celis JP (2007) Investigation of friction on hard homogeneous coatings during reciprocating tests at micro-Newton normal forces. Wear 263(7–12):1390–1396. https://doi.org/10.1016/j.wear.2006.12.013
VAM C, PAR R, Martins PAF (2011) Surface roughness and material strength of tribo-pairs in ring compression tests. Tribol Int 44(2):134–143. https://doi.org/10.1016/j.triboint.2010.10.002
Feng D, Shen MX, Peng XD, Meng XK (2017) Surface roughness effect on the friction and wear behaviour of acrylonitrile-butadiene rubber (NBR) under oil lubrication. Tribol Lett 65:10. https://doi.org/10.1007/s11249-016-0793-5
Podgornik B, Jerina J (2012) Surface topography effect on galling resistance of coated and uncoated tool steel. Surf Coat Tech 206(11–12):2792–2800. https://doi.org/10.1016/j.surfcoat.2011.11.041
Leu DK (2011) Modeling of surface roughness effect on dry contact friction in metal forming. Int J Adv Manuf Technol 57(5–8):575–584. https://doi.org/10.1007/s00170-011-3305-7
Michal GM, Paik DJ (2001). The effect of forming velocity, and stain path on the performance of galvannealed sheet steels, Galvatech’ 2001:73–80
Wang W, Hua M, Wei X (2012) A comparison study of sliding friction behavior between two high strength DP590 steel sheets against heat treated DC53 punch: hot-dip galvanized sheet versus cold rolled bare sheet. Tribol Int 54(1):114–122. https://doi.org/10.1016/j.triboint.2012.05.005
Duan D, Li S, Zhang R, Hu W, Hu WY, Li SZ (2006) Evaluation of adhesion between coating and substrate by a single pendulum impact scratch test. Thin Solid Films 515(4):2244–2250. https://doi.org/10.1016/j.tsf.2006.06.014
Eriksson J, Olsson M (2011) Tribological testing of commercial CrN, (Ti,Al)N and CrC/C PVD coatings—evaluation of galling and wear characteristics against different high strength steels. Surf Coat Tech 205(16):4045–4051. https://doi.org/10.1016/j.surfcoat.2011.02.053
Li B, Kang Y, Zhu G, Gao Y (2012) Effects of substrate strength on friction coefficient of galvannealed auto steel sheets. J Mater Eng 2(8):14–18. https://doi.org/10.3969/j.issn.1001-4381.2013.06.001
Garza LG, CJV T (2007) Friction and formability of galvannealed interstitial free sheet steel. J Mater Process Tech 187-188:164–168. https://doi.org/10.1016/j.jmatprotec.2006.11.062
Lee S, Joun M, Kim D, Lee J (2016) Effect of elastic-plastic behavior of coating layer on drawability and frictional characteristic of galvannealed steel sheet. J Mech Sci Technol 30(7):3313–3319. https://doi.org/10.1007/s12206-016-0640-5
Menezes PL, Kumar K, Kishore KSV (2009) Influence of friction during forming processes-a study using a numerical simulation technique. Int J Adv Manuf Technol 40(11–12):1067–1076. https://doi.org/10.1007/s00170-008-1425-5
Li G, Liu Y, Du T, Tong H (2014) Algorithm research and system development on geometrical springback compensation system of advanced high strength steel parts. Int J Adv Manuf Technol 70(1–4):413–427. https://doi.org/10.1007/s00170-013-5230-4
Leu DK (2015) Position deviation and springback in v-die bending process with asymmetric dies. Int J Adv Manuf Technol 79(5–8):1095–1108. https://doi.org/10.1007/s00170-014-6532-x
Wang H, Zhou J, Zhao T, Tao Y (2016) Springback compensation of automotive panel based on three- dimensional scanning and reverse engineering. Int J Adv Manuf Technol 85(5–8):1187–1193. https://doi.org/10.1007/s00170-015-8042-x
Darendeliler H, Akkök M, Yücesoy CA (2002) Effect of variable friction coefficient on sheet metal drawing. Tribol Int 35(2):97–104. https://doi.org/10.1016/S0301-679X(01)00099-8
Kobayashi S, Oh SI, Altan T, Chaudhary A (1990) Metal forming and the finite element method. J Mater Shaping Technol 8(1):65–65. https://doi.org/10.1007/BF02834794
Trzepieciński T, Fejkiel R (2017) On the influence of deformation of deep drawing quality steel sheet on surface topography and friction. Tribol Int 115:78–88. https://doi.org/10.1016/j.triboint.2017.05.007
Karupannasamy DK, Hol J, Rooij MBD, Meinders T, Schipper DJ (2014) A friction model for loading and reloading effects in deep drawing processes. Wear 318(1–2):27–39. https://doi.org/10.1016/j.wear.2014.06.011
Samuel M (2002) Influence of drawbead geometry on sheet metal forming. J Mater Process Tech 122(1):94–103. https://doi.org/10.1016/S0924-0136(01)01233-X
Kim H (2008) Prediction and elimination of galling in forming galvanized advanced high strength steels (AHSS) (Ph.D. thesis), Engineering Research Center for Net Shape Manufacturing, The Ohio State University
Yanagida A, Azushima A (2009) Evaluation of coefficients of friction in hot stamping by hot flat drawing test. CIRP Ann-Manuf Techn 58(1):247–250. https://doi.org/10.1016/j.cirp.2009.03.091
Figueiredo L, Ramalho A, Oliveira MC, Menezes LF (2011) Experimental study of friction in sheet metal forming. Wear 271(9):1651–1657. https://doi.org/10.1016/j.wear.2011.02.020
Dilmec M, Arap M (2016) Effect of geometrical and process parameters on coefficient of friction in deep drawing process at the flange and the radius regions. Int J Adv Manuf Technol 86(1–4):747–759. https://doi.org/10.1007/s00170-015-8225-5
WRD W, Hsu TC, Huang XB (1995) A realistic friction model for computer simulation of sheet metal forming processes. J Eng Ind 117(2):202–209. https://doi.org/10.1115/1.2803295
Wang Z, Tamotsu N, Kuniaki D, Obika T (2003) FEM analysis of contact mechanism in press-forming of lubricant precoated steel sheet. J Mater Process Tech 140(1–3):514–519. https://doi.org/10.1016/S0924-0136(03)00790-8
Abotani K, Hirohata K, Kiyasu T (2003) Hot-dip galvanized sheet steel with excellent press formability and surface quality for the automotive panels. Kawasaki Steel Techn Rep 48:17–22
Gong HY, Lou ZL, Zhang ZL (2004) Studies on the friction and lubrication characteristics in the sheet steel drawing process. J Mater Process Tech 151(1–3):328–333. https://doi.org/10.1016/j.jmatprotec.2004.04.082
Velkavrh I, Kalin M (2012) Comparison of the effects of the lubricant-molecule chain length and the viscosity on the friction and wear of diamond-like-carbon coatings and steel. Tribol Int 50(4):57–65. https://doi.org/10.1016/j.triboint.2012.01.008
Karupannasamy DK, Hol J, Rooij MBD, Meinders T, Schipper DJ (2012) Modelling mixed lubrication for deep drawing processes. Wear 294-295(31):296–304. https://doi.org/10.1016/j.wear.2012.06.006
Pereira MP, Rolfe BF (2014) Temperature conditions during 'cold' sheet metal stamping. J Mater Process Tech 214(8):1749–1758. https://doi.org/10.1016/j.jmatprotec.2014.03.020
Gåård A, Hallbäck N, Krakhmalev P, Bergström J (2010) Temperature effects on adhesive wear in dry sliding contacts. Wear 268(7–8):968–975. https://doi.org/10.1016/j.wear.2009.12.007
Okonkwo PC, Kelly G, Rolfe BF, Pereira MP (2012) The effect of temperature on sliding wear of steel-tool steel pairs. Wear 282-283(8):22–30. https://doi.org/10.1016/j.wear.2012.01.017
Kim H, Altan T, Yan Q (2009) Evaluation of stamping lubricants in forming advanced high strength steels (AHSS) using deep drawing and ironing tests. J Mater Process Tech 209(8):4122–4133. https://doi.org/10.1016/j.jmatprotec.2008.10.007
Groche P, Nitzsche G, Elsen A (2008) Adhesive wear in deep drawing of aluminum sheets. CIRP Ann-Manuf Techn 57(1):295–298. https://doi.org/10.1016/j.cirp.2008.03.042
Yan W (2010) Deformation and frictional heating in relation to wear in sheet metal stamping. Steel Res Int 81(9):713–716. https://doi.org/10.1002/srin.201190002
Friedrich K, Almajid AA (2013) Manufacturing aspects of advanced polymer composites for automotive applications. Appl Compos Mater 20(2):107–128. https://doi.org/10.1007/s10443-012-9258-7
Karbasian H, Tekkaya AE (2010) A review on hot stamping. J Mater Process Tech 210(15):2103–2118. https://doi.org/10.1016/j.jmatprotec.2010.07.019
Kalkan H, Hacaloglu T, Kaftanoglu B (2017) Experimental investigation of friction in deep drawing. Int J Adv Manuf Tech 92(9–12):3311–3318. https://doi.org/10.1007/s00170-017-0401-3
Hardell J, Prakash B (2008) High-temperature friction and wear behavior of different tool steels during sliding against Al-Si-coated high strength steel. Tribol Int 41(7):663–671. https://doi.org/10.1016/j.triboint.2007.07.013
Yanagida A, Kurihara T, Azushima A (2010) Development of tribo-simulator for hot stamping. J Mater Process Tech 210(3):456–460. https://doi.org/10.1016/j.jmatprotec.2009.10.007
Tian X, Zhang Y, Li J (2012) Investigation on tribological behavior of advanced high strength steels: influence of hot stamping process parameters. Tribol Lett 45(3):489–495. https://doi.org/10.1007/s11249-011-9908-1
Hardell J, Kassfeldt E, Prakash B (2008) Friction and wear behaviour of high strength boron steel at elevated temperatures of up to 800 °C. Wear 264(9–10):788–799. https://doi.org/10.1016/j.wear.2006.12.077
Kondratiuk J, Kuhn P (2011) Tribological investigation on friction and wear behaviour of coatings for hot sheet metal forming. Wear 270(11):839–849. https://doi.org/10.1016/j.wear.2011.02.011
Meng B, MW F, Wan M (2015) Drawability and frictional behavior of pure molybdenum sheet in deep-drawing process at elevated temperature. Int J Adv Manuf Technol 78(1–4):479–499. https://doi.org/10.1007/s00170-014-6698-2
Riahi AR, Alpas AT (2007) Adhesion of AA5182 aluminum sheet to DLC and TiN coatings at 25 °C and 420 °C. Surf Coat Tech 202(4):1055–1061. https://doi.org/10.1016/j.surfcoat.2007.07.085
Horiuchi T, Yoshihara S, Yu I (2011) Dry deep drawability of A5052 aluminum alloy sheet with DLC-coating. Wear 286-287(7):79–83. https://doi.org/10.1016/j.wear.2011.07.005
Murakami T, Kajino S, Nakano S (2013) High-temperature friction and wear properties of various sliding materials against aluminum alloy 5052. Tribol Int 60(7):45–52. https://doi.org/10.1016/j.triboint.2012.10.015
Zhang AW, Li Z (2006) Profile measuring and topography modeling of aluminum alloy sheet surface. Proc SPIE-The In Socr Optical Eng 6357:63571Y–635715. https://doi.org/10.1117/12.716992
Liao KC, Chen CL (2010) Investigation of surface roughness of aluminum alloy sheet based on crystalline plasticity model. Comp Mater Sci 49(1):S47–S53. https://doi.org/10.1016/j.commatsci.2010.03.038
Ishikawa T (2015) Overview of carbon fiber reinforced composites (CFRP) applications to automotive structural parts—focussed on thermoplastic CFRP. Int J Jpn S Prec Eng 81(6):489–493. https://doi.org/10.2493/jjspe.81.489
Friedrich K (1986) Wear of reinforced polymers by different abrasive counterparts. Compos Mater Ser 1:233–287. https://doi.org/10.1016/B978-0-444-42524-9.50012-0
Guo QB, Rong MZ, Jia GL, Lau KT, Zhang MQ (2009) Sliding wear performance of nano-SiO2/short carbon fiber/epoxy hybrid composites. Wear 266(7–8):658–665. https://doi.org/10.1016/j.wear.2008.08.005
SBK A, Khavandi A, Kharazi Y (2010) Effects of mixing the steel and carbon fibers on the friction and wear properties of a PMC friction material. Appl Compos Mater 17(2):151–158. https://doi.org/10.1007/s10443-009-9115-5
Zeng J (2010) Tensile and friction properties of tin bronze matrix composites reinforced by carbon fibers. Tribol Lett 40(3):311–317. https://doi.org/10.1007/s11249-010-9670-9
Zhang XR, Pei XQ, Wang QH (2009) Friction and wear studies of polyimide composites filled with short carbon fibers and graphite and micro SiO2. Mater Design 30(10):4414–4420. https://doi.org/10.1016/j.matdes.2009.04.002
Zhou S, Zhang Q, Wu C, Huang J (2013) Effect of carbon fiber reinforcement on the mechanical and tribological properties of polyamide6/polyphenylene sulfide composites. Mater Design 44:493–499. https://doi.org/10.1016/j.matdes.2012.08.029
Acknowledgments
We express our thanks to Guangdong Kelon Mould Co., Ltd. for their great support during the project.
Funding
This work is supported by the National Natural Science Foundation of China (grant number 51505348), Open Research Fund of the State Key Laboratory of Materials Processing and Die & Mould Technology (Huazhong University of Science and Technology, grant number P2016-15), Open Research Fund of the Key Laboratory of Metallurgical Equipment and Control Technology, Ministry of Education (Wuhan University of Science and Technology, grant number 2015B08), and the Science and Technology Planning Project of Ronggui (grant number RGJF(2017)27H-8).
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Li, G., Long, X., Yang, P. et al. Advance on friction of stamping forming. Int J Adv Manuf Technol 96, 21–38 (2018). https://doi.org/10.1007/s00170-017-1538-9
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00170-017-1538-9