Abstract
Face gear is an important part in the power transmission of helicopter, but its grinding is a difficult problem. In order to enhance the finishing machining surface quality of face gear, the mathematical formula of the residual height of motion trajectory of abrasive grains was obtained, and the model of grinding surface roughness of face gear was corrected. In addition, machining parameter optimization for grinding surface roughness on a five-axis blade grinding machine was investigated by orthogonal experiment method. The experiment results indicated that disk wheel spindle speed and feed velocity of the disk wheel are more significant effect factors among the three factors. The calculation results of model showed that the maximum error comparing with the experiment results is not more than 13.5 %, which suggests that the mathematical model is reasonable.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
Litvin F, Wang JC, Bossler R, Chen YJ, Heath G, Lewicki D (1994) Application of face-gear drives in helicopter transmissions. J Mech Des 116:672–676
Litvin F, Zhang Y, Wang JC, Bossler R, Chen YJ (1992) Design and geometry of face-gear drives. J Mech Des 114:642–647
Lin C, Cao XJ, Fan Y, Zeng D (2016) Pitch deviation measurement and analysis of curve-face gear pair. Measurement 81:95–101
Yang XY, Tang JY (2014) Research on manufacturing method of CNC plunge milling for spur face-gear. J Mater Process Technol 214:3013–3019
Tang J, Yang X (2016) Research on manufacturing method of planing for spur face-gear with 4-axis CNC planer. Int J Mach Tools Manuf 82:847–858
Wang YZ, Hou WL, Lan Z, Zhu CL (2016) Precision milling method for face-gear by disk cutter [J]. Int J Adv Manuf Tech:1–14. doi:10.1007/s00170-016-9189-9
Litvin FL, Fuentes A, Zanzi C, Pontiggia M, Handschuh RF (2002) Face-gear drive with spur involute pinion: geometry, generation by a worm, stress analysis. Comput Method Appl M 191:2785–2813
Beel K, Fisher D, Russell A, Folprecht G (2002) Face gear manufacturing method and apparatus. US Patent 6, 390, 894, B1
Gao J, Zhu R, Li Z (2011) Research on singularities of base worm thread surface for hobbing or grinding face gear. J Aerosp Power 26:2394–2400
Wang Y, Wu C, Ge X, Zhang L (2009) Basal worm-designing method of face-gear hob. J Beijing Univ Aeronaut Astronaut 35:166–169 in Chinese
Tang JY, Yin F, Chen XM (2013) The principle of profile modified face-gear grinding based on disk wheel. Mech Mach Theory 70:1–15
Wang Y, Lan Z, Hou L, Zhao H, Zhong Y (2015) A precision generating grinding method for face gear using CBN wheel. Int J Adv Manuf Tech 79:1839–1848
Guo H, Peng X, Zhao N, Zhang S (2015) A CNC grinding method and envelope residual model for face gear. Int J Adv Manuf Tech 79:1689–1698
Xiu S, Li C, Cai G (2005) Modification for theoretical model of ground surface roughness. J Northeast Univ Nat Sci 26:770 in Chinese
Dai K, Villegas J, Shaw L (2005) An analytical model of the surface roughness of an aluminum alloy treated with a surface nanocrystallization and hardening process. Scr Mater 52:259–263
Kwak JS, Sim SB, Jeong YD (2006) An analysis of grinding power and surface roughness in external cylindrical grinding of hardened SCM440 steel using the response surface method. Int J Mach Tools Manuf 46:304–312
Cao YL, Guan JY, Li B, Chen XL, Yang JX, Gan CB (2013) Modeling and simulation of grinding surface topography considering wheel vibration. Int J Adv Manuf Tech 66:937–945
Davim JP, Gaitonde V, Karnik S (2008) Investigations into the effect of cutting conditions on surface roughness in turning of free machining steel by ANN models. J Mater Process Technol 205:16–23
Zhang KL, Wei JJ (2010) Analysis and simulation of numerical control grinding spherical roughness based on MATLAB [J]. Modul Mach Tool & Auto Manuf Tech 3:007 in Chinese
Nguyen T, Butler D (2005) Simulation of surface grinding process, part 2: interaction of the abrasive grain with the workpiece. Int J Mach Tools Manuf 45:1329–1336
Du JP (2008) Research about optimization of grinding process based on fuzzy synthetic evaluation. Coal Mine Machinery 49(7):55–57 in Chinese
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Ming, X., Gao, Q., Yan, H. et al. Mathematical modeling and machining parameter optimization for the surface roughness of face gear grinding. Int J Adv Manuf Technol 90, 2453–2460 (2017). https://doi.org/10.1007/s00170-016-9576-2
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00170-016-9576-2