Abstract
In this paper, an experimental study of laser-metal inert gas (MIG) hybrid welding of A7N01-T6 aluminum alloy in butt joint configuration was carried out. Visual examination and optical microscope were utilized to study the macro profile and microstructure, while mechanical properties of the welds were evaluated with the help of a tensile test and microhardness measurement. The joints were evaluated by the scanning electron microscope (SEM) and energy dispersive X-ray spectroscopy (EDS). Besides, X-ray microtomography was employed to characterize the morphology, quantity, and distribution of porosities in the weld seam. The results revealed that 4-mm thickness high-quality laser-arc hybrid welding butt joints were obtained with parameters of laser power 3.5 kW, welding speed 4 m/min, and welding current 140 A. The average tensile strength of welded joints reached 268 MPa, 76.6 % of that of the base metal. The loss was likely to be related to the presence of micropores, and further three-dimensional characterization indicated that there were altogether 4326 pores with diameters ranging from 0.1 to 79 μm in the tested sample, accounting for 0.57 % of the volume fraction and 4.56 % of the cross-sectional area fraction at the most. The existence of porosities, the dissolution, and coarsening of strengthening precipitates together promoted the joint softening in A7N01-T6 hybrid welding process.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
Dixit M, Mishra R, Sankaran K (2008) Structure-property correlations in Al 7050 and Al 7055 high-strength aluminum alloys. Mater Sci Eng A 478(1):163–172
Lakshminarayanan A, Balasubramanian V, Elangovan K (2009) Effect of welding processes on tensile properties of AA6061 aluminium alloy joints. Int J Adv Manuf Technol 40(3):286–296
Cam G (2011) Friction stir welded structural materials: beyond Al-alloys. Int Mater Rev 56(1):1–48
Malarvizhi S, Raghukandan K, Viswanathan N (2008) Effect of post weld aging treatment on tensile properties of electron beam welded AA2219 aluminum alloy. Int J Adv Manuf Technol 37(3):294–301
Cao X, Wanjara P, Huang J, Munro C, Nolting A (2011) Hybrid fiber laser-arc welding of thick section high strength low alloy steel. Mater Des 32(6):3399–3413
Möller F, Thomy C (2013) Interaction effects between laser beam and plasma arc in hybrid welding of aluminum. Phys Procedia 41:81–89
Enz J, Khomenko V, Riekehr S, Ventzke V, Huber N, Kashaev N (2015) Single-sided laser beam welding of a dissimilar AA2024-AA7050 T-joint. Mater Des 76:110–116
Pakdil M, Cam G, Kocak M, Erim S (2011) Microstructural and mechanical characterization of laser beam welded AA6056 Al-alloy. Mater Sci Eng A 528(24):7350–7356
Seto N, Katayama S, Matsunawa A (2002) Porosity formation mechanism and reduction method in CO2 laser welding of stainless steel. Weld Int 16(6):451–460
Seto N, Katayama S, Matsunawa A (2000) High-speed simultaneous observation of plasma and keyhole behavior during high power CO2 laser welding: effect of shielding gas on porosity formation. J Laser Appl 12(6):245–250
Haboudou A, Peyre P, Vannes A, Peix G (2003) Reduction of porosity content generated during Nd: YAG laser welding of A356 and AA5083 aluminium alloys. Mater Sci Eng A 363(1):40–52
Yu YC, Wang CM, Hu XY, Wang J, Yu SF (2010) Porosity in fiber laser formation of 5A06 aluminum alloy. J Mech Sci Technol 24(5):1077–1082
Shore R, McCauly R (1970) Effects of porosity on high strength aluminum 7039. Weld J 49(7):311–321
Rudy J, Rupert E (1970) Effects of porosity on mechanical properties of aluminum welds. Weld J 49(7):322
Gou G, Zhang M, Chen H, Chen J, Li P, Yang YP (2015) Effect of humidity on porosity, microstructure, and fatigue strength of A7N01S-T5 aluminum alloy welded joints in high-speed trains. Mater Des 85:309–317
Steen W, Watkins KG, Mazumder J (2010) Laser material processing. Springer-Verlag London, London
Li Y, Luo Z, Yan FY, Duan R, Yao Q (2014) Effect of external magnetic field on resistance spot welds of aluminum alloy. Mater Des 56:1025–1033
Bachmann M, Avilov V, Gumenyuk A, Rethmeier M (2014) Experimental and numerical investigation of an electromagnetic weld pool support system for high power laser beam welding of austenitic stainless steel. J Mater Process Technol 214(3):578–591
Matsunawa A, Ohji T (1982) Role of surface tension in fusion welding (part 1): hydrostatic effect. Trans JWRI 11(2):145–154
Balasubramanian V, Ravisankar V, Madhusudhan Reddy G (2008) Effect of pulsed current welding on mechanical properties of high strength aluminum alloy. Int J Adv Manuf Technol 36(3):254–262
Katayama S, Ogawa K (2013) Laser weldability and ageing characteristics of welds: laser weldability of commercially available A7N01 alloy (1). Weld Int 27(3):172–183
İpekoğlu G, Erim S, Çam G (2014) Effects of temper condition and post weld heat treatment on the microstructure and mechanical properties of friction stir butt-welded AA7075 Al alloy plates. Int J Adv Manuf Technol 70(1):201–213
Hull D (1999) Fractography: observing, measuring and interpreting fracture surface topography. Cambridge University Press, Cambridge
Kim S, Jeong Y, Park J, Lee Y (2013) Fundamental study on electron beam weld sections and strengths using AA6061-T6 aluminum alloy plate. J Mech Sci Technol 27(10):2935–2940
İpekoğlu G, Gören Kıral B, Erim S, Çam G (2012) Investigation of the effect of temper condition on friction stir weldability of AA7075 Al-alloy plates. Mater Technol 46(6):627–632
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Liu, S., Li, J., Mi, G. et al. Study on laser-MIG hybrid welding characteristics of A7N01-T6 aluminum alloy. Int J Adv Manuf Technol 87, 1135–1144 (2016). https://doi.org/10.1007/s00170-016-8525-4
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00170-016-8525-4