Abstract
The use of modern casting materials allows the achievement of higher product quality indices. The conducted experimental studies of new materials allow obtaining alloys with high performance properties while maintaining low production costs. Studies have shown that in certain areas of applications, the expensive to manufacture austempered ductile iron (ADI) can be replaced with ausferritic ductile iron or bainitic nodular cast iron with carbides, obtained without the heat treatment of castings. The dissemination of experimental results is possible through the use of information technologies and building applications that automatically compare the properties of materials, as the machine learning tools in comparative analysis of the properties of materials, in particular ADI and nodular cast iron with carbides.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
Daber S, Prasad R (2008) Influence of austenitising temperature on the formation of strain induced martensite in austempered ductile iron. J Mater Sci 43:4929–4937
Olson BN, Moore DJ, Rundman KB (2002) Potential for practical applications of ausforming austempered ductile iron. AFS Transactions 111:965
Putatunda SK (2001) Development of austempered ductile cast iron (ADI) with simultaneous high yield strength and fracture toughness by a novel two-step austempering process. Mater Sci Eng A 315:70–80
Bayati H, Elliot R (1999) The concept of an austempered heat treatment processing window. Int J Cast Metals Res 11:413–417
Skoczylas P, Krzyńska A, Kaczorowski M (2011) The comparative studies of ADI versus Hadfield cast steel wear resistance. Arch Foundry Eng 11:123–126
Tybulczuk J, Kowalski A (2003) ADI. The properties and application in industry. Castings atlas. Instytut Odlewnictwa, Kraków (in Polish)
Keough JR (2010) Austempered ductile iron (ADI)—a green alternative. American Foundry Society, USA
Pietrowski S, Gumienny G (2010) Bainite obtaining in cast iron with carbides castings. Arch Foundry Eng 10:109–114
Gumienny G (2010) Bainitic-martensitic nodular cast iron with carbides. Arch Foundry Eng 10:63–68
Gumienny G (2010) Chromium and copper influence on the nodular cast iron with carbides microstructure. Arch Foundry Eng 10:47–54
Gumienny G (2012) The effect of nodular cast iron metal matrix on the wear resistance. Arch Foundry Eng 12:179–186
Pietrowski S, Gumienny G (2012) Microsegregation in nodular cast iron with carbides. Arch Foundry Eng 12:127–134
Gumienny G (2013) Carbidic bainitic and ausferritic ductile cast iron. Arch Metall Mater 58:1053–1058
Gumienny G, Klimek L (2014) Effect of temperature on ausferritic nodular cast iron microstructure. Arch Foundry Eng 14:21–24
Regulski K, Szeliga D, Kusiak J (2014) Data exploration approach versus sensitivity analysis for optimization of metal forming processes. Key Eng Mater 611–612:1390–1395
Regulski K et al. (2012) Data exploration approach in control of metal forming manufacturing chain: example of fasteners production. Steel Research International spec. ed: 611-612:1319–1322
Kluska-Nawarecka S, Wilk-Kołodziejczyk D., Regulski K et al (2011) Rough sets applied to the RoughCast system for steel castings. In: Nguyen NT et al. (ed) Intelligent information and database systemsof the series Lecture Notes in Computer Science, Berlin; Heidelberg: Springer-Verlag 6592:52–61
Nawarecki E, Kluska-Nawarecka S, Regulski K (2012) Multi-aspect character of the man-computer relationship in a diagnostic-advisory system. In: Hippe ZS et al (eds) Human-computer systems interaction: backgrounds and applications Springer, Heidelberg
Kluska-Nawarecka S, Wilk-Kolodziejczyk D, Reguslki K (2011) Practical aspects of knowledge integration using attribute tables generated from relational databases, computational collective intelligence—technologies and applications, Springer Lecture Notes in Computer Science
Górny Z, Kluska-Nawarecka S, Wilk-Kolodziejczyk D et al (2015) Methodology for the construction of a rule-based knowledge base enabling the selection of appropriate bronze heat treatment parameters using rough sets. Arch Metall Mater 60:309–315. doi:10.1515/amm-2015-0050
Kluska-Nawarecka S, Wilk-Kolodziejczyk D, Dajda J et al (2014) Computer-assisted integration of knowledge in the context of identification of the causes of defects in castings. Arch Metall Mater 59:743–746. doi:10.2478/amm-2014-0124
Kluska-Nawarecka S, Regulski K, Krzyżak M et al (2013) System of semantic integration of non-structuralized documents in natural language in the domain of metallurgy. Arch Metall Mater 58:927–930. doi:10.2478/amm-2013-0103
Kluska-Nawarecka S, Sniezynski B, Parada W et (2014) The use of LPR (logic of plausible reasoning) to obtain information on innovative casting technologies. Arch Civ Mech Eng 14:25–31
Gorny Z Kluska-Nawarecka S, Wilk-Kolodziejczyk D (2013) Heuristic models of the toughening process to improve the properties of non-ferrous metal alloys. Arch Metall Mater 58:849–852
Glowacz A, Glowacz W, Glowacz Z et al (2015) Recognition of armature current of DC generator depending on rotor speed using FFT, MSAF-1 and LDA. Maintenance Reliability 17:64–69
David J, Švec P, Frischer R et al (2014) The computer support of diagnostics of circle crystallizers. Metalurgija 53:193–196
David J, Jancíiková Z, Frischer R, et al (2013) Crystallizer’s desks surface diagnostics with usage of robotic system. Arch Metall Mater 58:907–910
Wilaszek K, Wojcik T, Oplainski A et al (2012) Internet identity analysis and similarities detection. Multimedia Communications, Services and Security, Berlin, pp 369–379
TurekW, Opalinski A, Kisiel-Dorohnicki M et al (2011) Extensible web crawler—towards multimedia material analysis. Multimedia Communications, Services and Security, Berlin, pp 183–190
Olejarczyk-Wożeńska I, Adrian H, Adrian A et al (2012) Parametric representation of TTT diagrams of ADI cast iron. Arch Metall Mater 57:981–986. doi:10.2478/v10172-012-0065-9
Olejarczyk-Wożeńska I, Adrian A, Mrzyglod B et al (2014) Mathematical model of the process of pearlite austenitization. Arch Metall Mater 59:613–617
Kmiec M, Glowacz A, Dziech A et al (2012) Towards robust visual knife detection in images: active appearance models initialised with shape-specific interest points. Multimedia Communications, Services and Security, Communications Computer Information Science 287:148–158
Witten I, Frank E (2000) Data mining: practical machine learning tools and techniques. Morgan Kaufmann, New York
Sztangret L, Szeliga D, Kusiak J et al (2012) Application of inverse analysis with metamodelling for identification of metal flow stress. Can Metall Q 51:440–446. doi:10.1179/1879139512Y.0000000035
Rauch L, Sztangret l, Pietrzyk M (2013) Computer system for identification of material models on the basis of plastometric tests. Arch Metall Mater 58:737–743
Tomar D, Agarwal S (2015) A comparison on multi-class classification methods based on least squares twin support vector machine. Knowl Based Syst 81:131–147
Li Yet, Yun Li, Yan Gao at al (2013) Fault diagnosis of metallurgical machinery based on spectral kurtosis and GA-SVM. Adv Mater Res 634–638:3958–3961. doi:10.4028/www.scientific.net/AMR.634-638.3958
Peng S, Hua Q, Chenb Y et al (2015) Improved support vector machine algorithm for heterogeneous data. Pattern Recogn 48:2072–2083
Widodo A, Yang B (2007) Application of nonlinear feature extraction and support vector machines for fault diagnosis of induction motors. Exp Sys App 33:241–250
Yuan S, Chu F (2007) Fault diagnosis based on support vector machines with parameter optimisation by artificial immunisation algorithm. Mech Syst Signal Process 21:1318–1330
Laurain Vet, Tóthc R, Pigad D al (2015) An instrumental least squares support vector machine for nonlinear system identification. Automatica 54:340–347
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
Open Access This article is distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution, and reproduction in any medium, provided you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made.
About this article
Cite this article
Wilk-Kolodziejczyk, D., Regulski, K. & Gumienny, G. Comparative analysis of the properties of the nodular cast iron with carbides and the austempered ductile iron with use of the machine learning and the support vector machine. Int J Adv Manuf Technol 87, 1077–1093 (2016). https://doi.org/10.1007/s00170-016-8510-y
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00170-016-8510-y