Abstract
Traditional product modeling methods mainly aim at physical products. However, with cloud manufacturing, the efficient management and utilization of big data under the support of cloud service platform are a challenge, and establishing a reasonable data model is the core of product life cycle data management for generalized products. Aiming at big data management of generalized product modules, the definition, description, and classification of general modules are given in this paper firstly. Then, modular master structure data models are built, including the composition of the generalized modular master structure, property description of generalized part variables, connection objects among the generalized parts, etc. Thirdly, modular instance structure data models of the generalized product are established, the formation process of the instance structure model is analyzed, and the structure mapping views in different phases of the product life cycle are also presented. Finally, based on the secondary development of a product life cycle management (PLM) system, the generalized product data models and the modular structure models of the transformer are carried out. The traditional integrated product models are enriched and improved so the demand of modular data management of generalized products is satisfied under the environment of cloud manufacturing.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
Qi GN (2009) Four big pressure ecbolic manufacturing services. Manufac Inform Eng Chin 1:14–15
Lee J, Abuali M (2011) Innovative Product Advanced Service Systems (I-PASS): methodology, tools, and applications for dominant service design. Int J Adv Manuf Technol 52(9-12):1161–1173
Li H, Ji YJ, Qi GN, Gu XJ, Tang RZ (2010) Connotation, theory and key technologies on the fusion of manufacturing and services. Comput Integr Manuf Syst 16(11):2521–2529
Li H, Ma J, Xiao Y Q, Luo G F (2011) Research on generalized product and its modularization process. Proceedings of ICSEM 2011, 22-23 Oct., Guiyang, China, pp290-293
Li H (2013) The key technologies of module partition and fusion for the generalized product. Dissertation, Zhejiang University
Tao F, Cheng Y, Zhang L, Nee A Y C (2015) Advanced manufacturing systems: socialization characteristics and trends. J Intell Manufac 1-16. DOI 10.1007/s10845-015-1042-8
Mont OK (2002) Clarifying the concept of product–service system. J Clean Prod 10(3):237–245
Tukker A (2013) Product services for a resource-efficient and circular economy—a review. J Clean Prod 97(15):76–91
Zhang F, Jiang P, Zhu Q, Cao W (2012) Modeling and analyzing of an enterprise collaboration network supported by service-oriented manufacturing. Proc Instit Mech Eng Part B: J Eng Manufac 226(9):1579–1593
Tao F, Zhang L, Venkatesh V C, Luo Y, Cheng Y. (2011) Cloud manufacturing: a computing and service-oriented manufacturing model. Proc Institution Mech Eng, Part B: J Eng Manufac 0954405411405575
Tao F, Zhang L, Liu Y, Cheng Y, Wang L, Xu X (2015) Manufacturing service management in cloud manufacturing: overview and research directions. J Manufac Sci Eng-Trans ASME. doi:10.1115/1.4030510
Li J, Tao F, Cheng Y, Zhao LJ (2015) Big data in product data management. Int J Adv Manuf Technol. doi:10.1007/s00170-015-7151-x
Aurich JC, Fuchs C, Wagenknecht C (2006) Life cycle oriented design of technical product-service systems. J Clean Prod 14(17):1480–1494
Jiao JX, Ma QH, Tseng MM (2003) Towards high value-added products and services mass customization and beyond. Technovation 23(10):809–821
Sakao T, Shimomura Y, Sundin E, Comstock M (2009) Modeling design objects in CAD system for service/product engineering. Comput Aided Des 41(3):197–213
Tao F, Zuo Y, Da Xu L, Zhang L (2014) IoT-based intelligent perception and access of manufacturing resource toward cloud manufacturing. IEEE Trans Indust Inform 10(2):1547–1557
Tao F, Lai Li Y, Xu L, Zhang L (2013) FC-PACO-RM: a parallel method for service composition optimal-selection in cloud manufacturing system. IEEE Trans Indust Inform 9(4):2023–2033
Tao F, Feng Y, Zhang L, Liao TW (2014) CLPS-GA: a case library and Pareto solution-based hybrid genetic algorithm for energy-aware cloud service scheduling. Appl Soft Comput 19:264–279
Tao F, Zhao D, Hu Y, Zhou Z (2008) Resource service composition and its optimal-selection based on particle swarm optimization in manufacturing grid system. Indust Inform, IEEE Trans 4(4):315–327
Tao F, Cheng Y, Da Xu L, Zhang L, Li BH (2014) CCIoT-CMfg: cloud computing and Internet of things-based cloud manufacturing service system. Indust Inform, IEEE Trans 10(2):1435–1442
Tong BS, Li MJ (2000) Product data management. Tsinghua University Press, Beijing
Zhang HM, Xiong GL (2006) The product life cycle management in manufacturing enterprises. Tsinghua University Press, Beijing
Gou JH, Peng YH, Ruan XY (2000) Product data model in product data management. J Shanghai Jiaotong Univ 34(3):404–407
Eynard B, Gallet T, Roucoules L (2006) PDM system implementation based on UML. Mathematics and Computers in Simulation 70(1): 330-342.
Saaksvuori A, Immonen A (2004) Product life cycle management. Springer, Berlin
Fowler J (1995) STEP for data management, exchange and sharing. Technology Appraisals Ltd., Britain
Stark J, Yang QH, Yu N, Li RW (2008) Product life cycle management. China Machine Press, Beijing
Yun XD (2010) Research on the analysis and application of integrated product meta model. Dissertation, Zhejiang University
Schoettner J, Qi GN (2000) Product data management in manufacturing enterprises. China Machine Press, Beijing
Qi GN, Schoettner J, Gu XJ (2005) Figure interpretation for product data management. China Machine Press, Beijing
Schoettner J (2009) PDM/PLM seminar in Guilin. Report, Guilin
Qi G N, Schoettner J (2010) Integrated product model and its application. Report, Zhejiang University
Yu JH (2002) Research and application on virtual product model for product lifecycle. Dissertation, Zhejiang University
Gu Q X (2006) Research on key technologies of configuration identification for product lifecycle. Dissertation, Zhejiang University
Li X S(2007) Research on the implementation process and integrated product metal model of PLM. Dissertation, Zhejiang University
Hu H (2011) Key technologies of equipment maintenance status management for product lifecycle. Dissertation, Zhejiang University
Pahl G, Beitz W (1996) Engineering design: a systematic approach. Springer, Berlin
Tong SZ (1999) The principle, method and application of modular design. China Standard Press, Beijing
Aoki M, AnTeng FK (2003) Modular era: the essence of the new industrial structure. Shanghai Far East Publishers, Shanghai
Li H, Ji YJ, Gu XJ, Qi GN (2012) Module partition process model and method of integrated service product. Comput Ind 63(4):298–308
Xu QL, Jiao JX (2009) Design project modularization for product families. J Mech Des 131(7):1–10
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Li, H., Ji, Y., Luo, G. et al. A modular structure data modeling method for generalized products. Int J Adv Manuf Technol 84, 197–212 (2016). https://doi.org/10.1007/s00170-015-7815-6
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00170-015-7815-6