Abstract
Metal matrix composites (MMCs) have become common materials that are employed in different industrial applications due to their outstanding strength and wear resistance. However, machining MMCs is considered to be a challenging process. This paper presents a micro-mechanical finite element analysis developed for simulation of MMC machining. Unlike the previously developed FE models, this model simulates the behavior of all main components that distinguish the MMC, namely the matrix, particles, and the particle-matrix interface, during the process. As a result, various aspects of the process, such as debonding and fracture in the particles and different scenarios of tool-particle interactions can be studied using the proposed model. The predicted forces were compared to the measured ones and used to verify the presented model. The developed model is successful in providing a broad understanding of MMC machining process.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
Bandyopadhyay NR, Ghosh S, Basumallick A (2007) New generation metal matrix composites. Mater Manuf Process 22(6):679–682
Kannan S, Kishawy H (2008) Tribological aspects of machining aluminium metal matrix composites. J Mater Process Technol 198(1):399–406
Krishnaraj V, Prabukarthi A, Ramanathan A, Elanghovan N, Kumar MS, Zitoune R, Davim JP (2012) Optimization of machining parameters at high speed drilling of carbon fiber reinforced plastic (CFRP) laminates. Compos Part B 43(4):1791–1799
Zitoune R, Krishnaraj V, Sofiane Almabouacif B, Collombet F, Sima M, Jolin A (2012) Influence of machining parameters and new nano-coated tool on drilling performance of CFRP/Aluminium sandwich. Compos Part B 43(3):1480–1488
Muguthu JN, Gao D (2013) Profile fractal dimension and dimensional accuracy analysis in machining metal matrix composites (MMCs). Mater Manuf Process 28(10):1102–1109. doi:10.1080/10426914.2013.823501
Sidhu SS, Batish A, Kumar S (2013) EDM of metal matrix composite for parameter design using lexicographic goal programming. Mater Manuf Process 28(4):495–500. doi:10.1080/10426914.2013.763958
Kishawy HA, Kannan S, Balazinski M (2004) An energy based analytical force model for orthogonal cutting of metal matrix composites. CIRP Ann Manuf Technol 53(1):91–94. doi:10.1016/S0007-8506(07)60652-0
Sikder S, Kishawy HA (2012) Analytical model for force prediction when machining metal matrix composite. Int J Mech Sci 59(1):95–103. doi:10.1016/j.ijmecsci.2012.03.010
Kishawy HA, Kannan S, Balazinski M (2005) Analytical modeling of tool wear progression during turning particulate reinforced metal matrix composites. CIRP Ann—Manuf Technol 54(1):55–58. doi:10.1016/S0007-8506(07)60048-1
Kannan S, Kishawy HA (2006) Surface characteristics of machined aluminium metal matrix composites. Int J Mach Tools Manuf 46(15):2017–2025. doi:10.1016/j.ijmachtools.2006.01.003
Bhatnagar N, Nayak D, Singh I, Chouhan H, Mahajan P (2004) Determination of machining-induced damage characteristics of fiber reinforced plastic composite laminates. Mater Manuf Process 19(6):1009–1023
Singh G, Teli M, Samanta A, Singh R (2013) Finite element modeling of laser-assisted machining of AISI D2 tool steel. Mater Manuf Process 28(4):443–448
Atlati S, Haddag B, Nouari M, Zenasni M (2014) Thermomechanical modelling of the tool-workmaterial interface in machining and its implementation using the ABAQUS VUINTER subroutine. Int J Mech Sci 87:102–117
Salahshoor M, Guo YB (2014) Finite element simulation and experimental validation of residual stresses in high speed dry milling of biodegradable magnesium-calcium alloys. Int J Mech Sci 80:153–159
Zhu Y, Kishawy HA (2005) Influence of alumina particles on the mechanics of machining metal matrix composites. Int J Mach Tools Manuf 45(4–5):389–398. doi:10.1016/j.ijmachtools.2004.09.013
Pramanik A, Zhang LC, Arsecularatne JA (2007) An FEM investigation into the behavior of metal matrix composites: tool-particle interaction during orthogonal cutting. Int J Mach Tools Manuf 47(10):1497–1506
Zhou L, Huang ST, Wang D, Yu XL (2011) Finite element and experimental studies of the cutting process of SiCp/Al composites with PCD tools. Int J Adv Manuf Technol 52(5–8):619–626. doi:10.1007/s00170-010-2776-2
Dandekar CR, Shin YC (2009) Multi-step 3-D finite element modeling of subsurface damage in machining particulate reinforced metal matrix composites. Compos A: Appl Sci Manuf 40(8):1231–1239
Wang T, Xie L, Wang X (2015) Simulation study on defect formation mechanism of the machined surface in milling of high volume fraction SiCp/Al composite. Int J Adv Manuf Technol:1–10. doi:10.1007/s00170-015-6876-x
Umer U, Ashfaq M, Qudeiri JA, Hussein HMA, Danish SN, Al-Ahmari AR (2015) Modeling machining of particle-reinforced aluminum-based metal matrix composites using cohesive zone elements. Int J Adv Manuf Technol:1–9. doi:10.1007/s00170-014-6715-5
Özel T (2006) The influence of friction models on finite element simulations of machining. Int J Mach Tools Manuf 46(5):518–530
Dandekar CR, Shin YC (2012) Modeling of machining of composite materials: a review. Int J Mach Tools Manuf 57:102–121
Johnson GR, Cook WH (1983) A constitutive model and data for metals subjected to large strains, high strain rates and high temperatures. In: International Ballistics Committee, The Hague, Netherlands. p 1–2
Johnson GR, Cook WH (1985) Fracture characteristics of three metals subjected to various strains, strain rates, temperatures and pressures. Eng Fract Mech 21(1):31–48
Shackelford JF, Alexander W (2000) CRC Materials Science and Engineering Handbook, Third Edition. Taylor & Francis
Holt JM, Gibson C, Ho CY (1999) Structural alloys handbook. vol v. 2. CINDAS/Purdue University, West Lafayette
Lesuer DR, Kay GJ, LeBlanc MM (1999) Modeling large-strain, high-rate deformation in metals. In: Third Biennial Tri-Laboratory Engineering Conference on Modeling and Simulation, Pleasanton, CA, United States of America
Munro RG (1997) Evaluated material properties for a sintered α-alumina. J Am Ceram Soc 80(8):1919–1928
Foulk JW, Allen DH, Helms KLE (2000) Formulation of a three-dimensional cohesive zone model for application to a finite element algorithm. Comput Methods Appl Mech Eng 183(1–2):51–66. doi:10.1016/S0045-7825(99)00211-X
Tvergaard V (2003) Debonding of short fibres among particulates in a metal matrix composite. Int J Solids Struct 40(25):6957–6967. doi:10.1016/S0020-7683(03)00347-0
Abaqus (2014) Abaqus 6.14 Documentation. SIMULIA, United States of America
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Ghandehariun, A., Kishawy, H.A., Umer, U. et al. Analysis of tool-particle interactions during cutting process of metal matrix composites. Int J Adv Manuf Technol 82, 143–152 (2016). https://doi.org/10.1007/s00170-015-7346-1
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00170-015-7346-1