Abstract
Cloud manufacturing (CM) and Internet of things (IoT) are interlinked, yet most works only focused on one of them and take the other as a constituent technology unit. This is practically inadequate, especially for a highly service-driven manufacturing execution system which entails systematical CM supports to respond to the real-time dynamics captured from the IoT-enabled execution hierarchy. To deal with the dynamics occurring in production logistics (PL) processes, this paper investigates a dynamic PL synchronization (PLS) of a manufacturer adopting public PL services. Contemporary CM and IoT infrastructures are systematically integrated to enable a smart PLS control mechanism with multi-level dynamic adaptability. The S-CM operation framework, operation logic, and PLS infrastructure are presented with an industrial case, and the effectiveness is also demonstrated and analyzed.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
Matuszek J, Mleczko J (2009) Production control in moving bottlenecks in conditions of unit and small-batch production. Bull Pol Acad Sci Tech Sci 57(3):229–239
Li BH, Zhang L, Wang S-L, Tao F, Cao J, Jiang X, Chai X (2010) Cloud manufacturing: a new service-oriented networked manufacturing model. Comput Integr Manuf Syst 16(1):1–7
Li BH, Zhang L, Ren L, Chai XD, Tao F, Luo YL, Zhao X (2011) Further discussion on cloud manufacturing. Comput Integr Manuf Syst 17(3):449–457
Wilk EDO, Fensterseifer JE (2003) Use of resource-based view in industrial cluster strategic analysis. Int J Oper Prod Manag 23(9):995–1009
Qu T, Lei SP, Chen YD, Wang ZZ, Luo H, Huang GQ (2014) Internet-of-Things-enabled Smart Production Logistics Execution System Based on Cloud Manufacturing. In: Proceedings of ASME 2014 Conference on Manufacturing Science and Engineering Conference. doi:10.1115/MSEC2014-4194
Pundoor G (2005) Integrated production-distribution scheduling in supply chains. http://hdl.handle.net/1903/2583
Bard JF, Nananukul N (2009) The integrated production–inventory–distribution–routing problem. J Sched 12(3):257–280
Huang GQ, Zhang YF, Jiang PY (2008) RFID-based wireless manufacturing for real-time management of job shop WIP inventories. Int J Adv Manuf Technol 36(7–8):752–764
Zhang YF, Huang GQ, Sun SD, Yang T (2014) Multi-agent based real-time production scheduling method for radio frequency identification enabled ubiquitous shopfloor environment. Int J Comput Ind Eng 76:89–97
Zhang YF, Zhang G, Du W, Wang JQ, Ali E, Sun SD (2015) An optimization method for shopfloor material handling based on real-time and multi-source manufacturing data. Int J Prod Econ
Chow HK, Choy KL, Lee WB, Lau KC (2006) Design of a RFID case-based resource management system for warehouse operations. Expert Syst Appl 30(4):561–576
Qu T, Yang HD, Huang GQ, Zhang YF, Luo H, Qin W (2012) A case of implementing RFID-based real-time shop-floor material management for household electrical appliance manufacturers. J Intell Manuf 23(6):2343–2356
Wang ML, Qu T, Zhong RY, Dai QY, Zhang XW, He JB (2012) A radio frequency identification-enabled real-time manufacturing execution system for one-of-a-kind production manufacturing: a case study in mould industry. Int J Comput Integr Manuf 25(1):20–34
Zhong RY, Dai QY, Qu T, Hu GJ, Huang GQ (2013) RFID-enabled real-time manufacturing execution system for mass-customization production. Robot Comput Integr Manuf 29(2):283–292
Qu T, Nie DX, Wang ZZ, Chen X, Dai QY, Huang GQ (2014) Optimal configuration of cluster supply chains with augmented Lagrange coordination. Comput Ind Eng
Xu X (2012) From cloud computing to cloud manufacturing. Robot Comput Integr Manuf 28(1):75–86
Wu D, Rosen DW, Wang L, Schaefer D (2015) Cloud-based design and manufacturing: a new paradigm in digital manufacturing and design innovation. Comput Aided Des 59(1):1–14
Wu D, Thames JL, Rosen DW, Schaefer D (2013) Enhancing the product realization process with cloud-based design and manufacturing systems. Trans ASME J Comput Inf Sci Eng 13(4): 041004-041004-14
Wu D, Greer MJ, Rosen DW, Schaefer D (2013) Cloud manufacturing: strategic vision and state-of-the-art. Trans SME J Manuf Syst 32(4):564–579
Luo Y, Zhang L, Tao F, Ren L, Liu Y, Zhang Z (2013) A modeling and description method of multidimensional information for manufacturing capability in cloud manufacturing system. Int J Adv Manuf Technol 69(5–8):961–975
Ying-feng Z, Geng Z, Teng Y, Jun-qiang W, Shu-dong S (2014) Service encapsulation and virtualization access method for cloud manufacturing machine. Comp Integr Manuf Syst
Guo Z, Guo C (2014) A cloud-based decision support system framework for order planning and tracking. In: Proceedings of the seventh international conference on management science and engineering management, pp. 85–98
Laili Y, Tao F, Zhang L, Sarker BR (2012) A study of optimal allocation of computing resources in cloud manufacturing systems. Int J Adv Manuf Technol 63(5–8):671–690
Tao F, LaiLi Y, Xu L, Zhang L (2013) FC-PACO-RM: a parallel method for service composition optimal-selection in cloud manufacturing system. IEEE Trans Ind Inf 9(4):2023–2033
Tao F, Cheng Y, Xu LD, Zhang L (2014) CCIOT-CMFG: cloud computing and Internet of things-based cloud manufacturing service system. IEEE Trans Ind Inf 10(2):1435–1442
Zhang L, Luo Y, Tao F, Li BH, Ren L, Zhang X, Liu Y (2014) Cloud manufacturing: a new manufacturing paradigm. Enterp Inf Syst 8(2):167–187
Xiang F, Hu YF (2012) Cloud manufacturing resource access system based on Internet of things. Appl Mech Mater 121:2421–2425
Ren L, Zhang L, Tao F, Zhao C, Chai X, Zhao X (2013) Cloud manufacturing: from concept to practice. Enterp Inf Syst, (ahead-of-print), pp. 1–24
Zhang Y, Qu T, Ho OK, Huang GQ (2011) Agent-based smart gateway for RFID-enabled real-time wireless manufacturing. Int J Prod Res 49(5):1337–1352
Zhang Y, Qu T, Ho O, Huang GQ (2011) Real-time work-in-progress management for smart object-enabled ubiquitous shop-floor environment. Int J Comput Integr Manuf 24(5):431–445
Jiang P, Cao W (2013) An RFID-driven graphical formalized deduction for describing the time-sensitive state and position changes of work-in-progress material flows in a job-shop floor. J Manuf Sci Eng 135(3):031009
Zhang YF, Xu JX, Sun SD, Yang T (2015) Real-time information driven intelligent navigation method of assembly station in unpaced lines. Int J Comput Ind Eng
Tao F, Zhang L, Venkatesh VC, Luo Y, Cheng Y (2011) Cloud manufacturing: a computing and service-oriented manufacturing model. Proc Inst Mech Eng B J Eng Manuf 0954405411405575
Zhang YF, Wang JQ, Sun SD (2014) Real-time information capturing and integration framework of the Internet of manufacturing things. Int J Comput Integr Manuf
Zhang Y, Huang GQ, Qu T, Ho O, Sun S (2011) Agent-based smart objects management system for real-time ubiquitous manufacturing. Robot Comput Integr Manuf 27(3):538–549
Huang GQ, Zhang YF, Chen X, Newman ST (2008) RFID-enabled real-time wireless manufacturing for adaptive assembly planning and control. J Intell Manuf 19(6):701–713
Qu T, Huang GQ, Zhang YF, Dai QY (2009) A generic analytical target cascading optimization system for decentralized supply chain configuration over supply chain grid. Int J Prod Econ 127:262–277
Qu T, Luo H, Huang GQ, Cao N, Fang J, Zhong RY, Qiu X (2012) RFID-enabled just-in-time logistics management system for “SHIP”—supply hub in industrial park. In: Computers and industrial engineering 42, Cape Town, South Africa, pp. 263-1–263-19
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Qu, T., Lei, S.P., Wang, Z.Z. et al. IoT-based real-time production logistics synchronization system under smart cloud manufacturing. Int J Adv Manuf Technol 84, 147–164 (2016). https://doi.org/10.1007/s00170-015-7220-1
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00170-015-7220-1