Abstract
This paper presents an error budget methodology for designing and characterizing machines used to manufacture or inspect parts with spatial frequency-based specifications. In this methodology, the static and dynamic error are considered in the error budget; the static error affects the figure accuracy, while the dynamic error introduces the spatial frequency domain error. The error caused by the components of the machine tool, the cutting process and the external interference, are considered in this paper. Using the error budget, it is able to minimize risk during initial stages by ensuring that the machine will produce components that meet specifications before the machine is actually built or purchased. This methodology is used to predict and improve the performance of an ultraprecision flycutting machine tool.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
Painsner JA, Boyes JD, Kuopen SA (1994) National ignition facility. Laser Focus World 30:75
Lin ZQ (1999) SG-II laser elementary research and precision SG-II program. Fusion Eng Des 44:61–66
Shore P, Morantz P, Luo X, Tonnellier X, Collins R, Roberts A, Miller R, Read R (2005) Large optix ultra-precision grinding/measuring system. Proceedings of SPIE-The International Society for Optical Engineering Q:1–8.
Li MQ, Chen MJ, Cheng J, Xiao Y, Jiang W (2013) Two important mechanisms damaging KH4PO2 crystal processed by ultraprecision fly cutting and their relationships with cutting parameters. Appl Opt 52:3451–3460
Chen MJ, Li MQ, Cheng J, Jiang W, Wang J, Xu Q (2011) Study on characteristic parameters influencing laser-induced damage threshold of KH2PO4 crystal surface machined by single point diamond turning. J Appl Phys 110:113103
Donaldson RR (1972) A simple method for separating spindle error from test ball roundness error. Ann CIRP 21:125–126
Slocum AH. in: Precision Machine Design, Englewood Cliffs, Prentice Hall, 1992.
Treib T, Matthias E (1987) Error budgeting—applied to the calculation and optimization of the volumetric error field of multiaxis systems. CIRP Ann Manuf Technol 36:365–368
Error budget as a design tool for ultra-precision diamond turning machines, http://ebookbrowsee.net/1023-pdf-d32511414
Johan G (1995) Error budgeting for control system design. RD J 11:61–67
Hii KF, Zhao XH, Vallance RR (2000) Design of a precision electro discharge micro milling machine. Proceedings of the American Society of Precision Engineers Annual Conference. Scottsdale, Arizona. October 22–27.
Krulewich D, Hauschildt H (1998) Spatial frequency domain error budget, 13th Annual Meeting of the American Society for Precision Engineering, St. Louis, MO, October 25–30.
Lahaye P, Chomont C, Dumont P, Duchesne J, Chabassier G (1999) Using a design of experiment method to improve KDP crystal machining process. SPIE 3492:814–820
Spaeth ML, Manes KR, Widmayer CC (2004) National ignition facility wavefront requirements and optical architecture. Opt Eng 43:2854–2865
Aikens D (1995) Derivation of preliminary specifications for transmitted wavefront and surface roughness for large optics used in Inertial Confinement Fusion. Proc SPIE 2633:350–360
Chen WQ, Liang YC, Sun YZ, An CH, Chen GD (2014) Investigation of the influence of constant pressure oil source fluctuations on ultra-precision machining, Proc IMechE Part B: J Engineering Manufacture, doi:10.1177/0954405414530694
Liang YC, Chen WQ, An CH, Luo XC, Chen GD, Zhang Q (2014) Investigation of the tool-tip vibration and its influence upon surface generation in flycutting, Proc IMechE Part C:J Mechanical Engineering Science doi:10.1177/0954406213516440
Sun YZ, Chen WQ, Liang YC, An CH, Chen GD, Su H (2014) An integrated method for waviness simulation on large-size surface, Proc IMechE Part B: J Engineering Manufacture doi:10.1177/0954405414525143
Chen WQ, Liang YC, Sun YZ, Huo DH, Lu LH, Liu HT (2014) Design philosophy of an ultra-precision fly cutting machine tool for KDP crystal machining and its implementation on the structure design. Int J Adv Manuf Technol 70:429–438
Liang YC, Chen WQ, Bai QS, Sun YZ, Chen GD, Zhang Q, Sun Y (2013) Design and dynamic optimization of an ultraprecision diamond flycutting machine tool for large KDP crystal machining. Int J Adv Manuf Technol 69:237–244
Kanai K (1957) Semi-empirical formula for the seismic characteristics of the ground. Tokyo Univ Earthq Res Inst Bull 35:307–325
Yang ZC, Xu YL (2003) Studies on the integrated active control of micro vibration for Hi-Tech facilities. J Northwest Polytech Univ 21(6):646–649
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Sun, Y., Chen, W., Liang, Y. et al. Dynamic error budget analysis of an ultraprecision flycutting machine tool. Int J Adv Manuf Technol 76, 1215–1224 (2015). https://doi.org/10.1007/s00170-014-6373-7
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00170-014-6373-7