Abstract
This paper focuses on the mechanism of high-speed grinding to achieve quality and efficiency for ceramics. The criterion of the brittle–ductile removal transition of ceramics is calculated and analyzed. The effects of the wheel velocity on the specific grinding forces, energy, and specific material removal rates were investigated. The influence of the wheel velocity on the surface integrity was studied in the terms of surface roughness by a 3D optical profilometer, scanning electron microscopy, respectively. The ductile removal mechanism of brittle material was validated experimentally. High quality and efficiency of grinding for SiC can been attained with high-speed grinding due to the understanding of the characteristics and mechanism for ductile grinding of brittle materials with high-speed grinding. Furthermore, based on the high-performance grinding mechanism, reasonable definitions on high-speed grinding are proposed.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
Mamalis AG, Kundrak J, Gyani K (2002) On the precision grinding of advanced ceramics. Int J Adv Manuf Technol 20(4):255–258
Ramesh K, Yeo SH, Gowri S (2001) Experimental evaluation of super high-speed grinding of advanced ceramics. Int J Adv Manuf Technol 17(2):87–92
Hwang TW, Malkin S (1999) Grinding mechanisms and energy balance for ceramics. J Manuf Sci E-T ASME 121(4):623–631
Schulz H, Moriwaki T (1992) High-speed machining. CIRP Ann Manuf Technol 41(2):637–643
Hwang TW, Evans CJ, Malkin S (2000) An investigation of high-speed grinding with electroplated diamond wheels. CIRP Annals Manuf Technol 49(1):245–248
Malkin S, Guo C (1989) Grinding technology: theory and applications of machining with abrasives. Ellis Horwood Press, Chichester, England
Bifano TG (1988) Ductile-Regime Grinding of Brittle Materials. Dissertation, North Carolina State University
Bifano TG, Dow TA, Scattergood RO (1991) Ductile-regime grinding: a new technology for machining brittle materials. J Manuf Sci E-T ASME 113(2):184–189
Ravichandran G, Subhash G (1995) A micromechanical model for high strain rate behavior of ceramics. Int J Solids Struct 32(17,18):2627–2646
Hall IW, Guden M (1998) High strain rate behavior of a SiC particulate reinforced Al2O3 ceramic matrix composite. Scr Mater 38(4):667–674
Grady DE, Lipkin J (1980) Criteria for impulsive rock fracture. Geophys Res Lett 7(4):255–258
Klocke F, Beck T, Hoppe S, Krieg T, Müller N, Nöthe T, Raedt HW, Sweeney K (2001) Examples of FEM application in manufacturing technology. J Mater Process Technol 120(1–3):450–457
Wang JJ, Zhu JG, Chiu CF, Zhang H (2007) Experimental study on fracture toughness and tensile strength of a clay. Eng Geol 94(1–2):65–75
Zhang ZX (2002) An empirical relation between mode I fracture toughness and the tensile strength of rock. Int J Rock Mech Min 39(3):401–406
Huang H (2009) High-speed grinding of advanced ceramics: a review. Key Eng Mat 404
Schneider GA (1989) Thermoschockverhalten von Hochleistungskeramik. Dissertation, University of Stuttgart
Couvy H, Lahiri D, Chen J, Agarwal A, Sen G (2011) Nanohardness and Young's modulus of nanopolycrystalline diamond. Scr Mater 64(11):1019–1022
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Li, B., Ni, J., Yang, J. et al. Study on high-speed grinding mechanisms for quality and process efficiency. Int J Adv Manuf Technol 70, 813–819 (2014). https://doi.org/10.1007/s00170-013-5297-y
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00170-013-5297-y