Abstract
Pulsed-laser ablation of an aluminum bulk sample was performed both in water and air with a Q-switched Nd:YAG 1,064-nm laser over a range of high-output energies from 100 to 500 mJ. The effect of laser drilling in terms of produced crater volumes as a function of water-layer thickness was studied. The water-layer thickness was varied from 1 to 20 mm. In a special case, water droplets were added to the ablation region of the dry target in order to support ablation. Water-layer thickness in that case was estimated to be 0.5 mm. A comparison of the results obtained in air and underwater was performed. It is found that the aluminum target may be drilled more efficiently under the confinement of water compared to drilling in air environment. Further drilling efficiency can be achieved by varying the thickness of water. The optimized water thickness under the conditions of our experiment was found to be 3 mm. In that case, a 28-fold increase in crater volume and 18-fold increase in crater depth was achieved as compared to ablation in air. In underwater ablation, the formation of irregular surface structures of re-deposited material around the crater (rim) is avoided and the crater surface is smoother. In an air environment, the drilling is suppressed due to an immediate re-solidification and re-deposition of ablated material. This leads to a better characteristics of craters obtained underwater in terms of roughness, shape, volumes, and reproducibility.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
Li L, Hong M, Schmidt M, Zhong M, Mashe A, Huis int’Veld B, Kovalenko V (2011) Laser nano-manufacturing–state of the art and challenges. CIRP Annals - Manufacturing Technology 60(2):735–755
Dubey AK, Yadava V (2008) Laser beam machining—a review. Int J Mach Tool Manuf 48:609–628
Knowles MRH, Rutterford G, Karnakis D, Ferguson A (2007) Micro-machining of metals, ceramics and polymers using nanosecond lasers. Int J Adv Manuf Technol 33:95–102
Chryssolouris G, Tsoukantas G, Salonitis K, Stavropoulos P, Karagiannis S (2003) Laser machining modelling and experimentation—an overview, Proc SPIE 5131, 3rd GR-I International Conference on New Laser Technologies and Applications 158–168
Stournaras A, Salonitis K, Stavropoulos P, Chryssolouris G (2009) Theoretical and experimental investigation of pulsed laser grooving process. Int J Adv Manuf Technol 44:114–124
Salonitis K, Stournaras A, Tsoukantas G, Stavropoulos P, Chryssolouris G (2007) A theoretical and experimental investigation on limitations of pulsed laser drilling. J Mater Process Technol 183:96–103
Hopp B, Smausz T, Bereznai M (2007) Laser drilling of high aspect ratio holes in copper with femtosecond, picosecond and nanosecond pulses. Appl Phys A 61:77–79
Weck A, Crawford THR, Wilkinson DS, Haugen HK, Preston JS (2008) Laser drilling of high aspect ratio holes in copper with femtosecond, picosecond and nanosecond pulses. Appl Phys A 90:537–543
Krstulović N, Milošević S (2010) Drilling enhancement by nanosecond–nanosecond collinear dual-pulse laser ablation of titanium in vacuum. Appl Surf Sci 256:4142–4148
Kang HW, Lee H, Welch AJ (2008) Laser ablation in liquid-confinement using a nanosecond laser pulse. J Appl Phys 103:083101
Vogel A, Busch S, Parlitz U (1996) Shock wave emission and cavitation bubble generation by picoseconds and nanosecond optical breakdown in water. J Acoust Soc Am 100:148–165
Ohara J, Nagakubo M, Kawahara N, Hattori T (1997) High aspect ratio etching by infrared laser induced micro bubbles. The Tenth Annual International Workshop on Micro Electro Mechanical Systems. 26-30 Jan 1997.
Tsuji T, Okazaki Y, Tsuboi Y, Tsuji M (2007) Nanosecond time-resolved observations of laser ablation of silver in water. Jpn J Appl Phys 46:1533–1535
Isselin JC, Alloncle AP, Autric M (1998) On laser induced single bubble near solid boundary: contribution to the understanding of erosion phenomena. J Appl Phys 84:5766–5771
Kang HW, Lee H, Chen S, Welch AJ (2006) Enhancement of bovine bone ablation assisted by a transparent liquid layer on a target surface. IEEE J Quantum Electron 42:633–642
Lu J, Xu RQ, Chen X, Shen ZH, Ni XW, Zhang SY, Gao CM (2004) Mechanisms of laser drilling of metal plates underwater. J Appl Phys 95:3890–3894
Kruusing A (2004) Underwater and water-assisted laser processing: part 2—etching, cutting and rarely used methods. Opt Lasers Eng 41:329–352
Choo KL, Ogawa Y, Kanbargi G, Otra V, Raff LM, Komanduri R (2004) Micromachining of silicon by short-pulse laser ablation in air and under water. Mat Sci Eng A–Struct 372:145–162
Tsai C-H, Li C-C (2009) Investigation of underwater laser drilling for brittle substrates. J Mater Process Technol 209:2838–2846
Yan Y, Li L, Sezer K, Wang W, Whitehead D, Ji L, Bao Y, Jiang Y (2011) CO2 laser underwater machining of deep cavities in alumina. J Eur Ceram Soc 31:2793–2807
Wee LM, Ng EYK, Prathama AH, Zheng H (2011) Micro-machining of silicon wafer in air and under water. Opt Laser Technol 43:62–71
Kumar B, Treja RK (2010) Synthesis of nanoparticles in laser ablation of aluminium in liquid. J Appl Phys 108:1–6
Perez D, Béland LK, Deryng D, Lewis LJ, Meunier M (2008) Numerical study of the thermal ablation of wet solids by ultrashort laser pulses. Phys Rev B 77:014108
Perminov PA, Dzhun IO, Ezhov AA, Zabotnov SV, Golovan LA, Ivlev GD, Gatskevich EI, Malevich VL, Kashkarov PK (2011) Creation of silicon nanocrystals using the laser ablation in liquid. Laser Phys 21:801–804
Yang GW (2007) Laser ablation in liquids: applications in the synthesis of nanocrystals. Prog Mater Sci 52:648–698
Kazakevich PV, Simakin AV, Voronov VV, Shafeev GA (2006) Laser induced synthesis of nanoparticles in liquids. Appl Surf Sci 252:4373–4380
Zhu XP, Suzuki T, Nakayama T, Suematsu H, Jiang W, Niihara K (2006) Underwater laser ablation approach to fabricating monodisperse metallic nanoparticles. Chem Phys Lett 427:127–131
Liu P, Cui H, Wang CX, Yang GW (2010) From nanocrystal synthesis to functional nanostructure fabrication: laser ablation in liquid. Phys Chem Chem Phys 12:3942–3952
Nikolov AS, Nedyalkov NN, Nikov RG, Atanasov PA, Alexandrov MT (2011) Characterization of Ag and Au nanoparticles created by nanosecond pulsed laser ablation in double distilled water. Appl Surf Sci 257:5278–5282
De Giacomo A, De Bonis A, Dell’Aglio M, De Pascale O, Gaudiuso R, Orlando S, Santagata A, Senesi GS, Taccogna F, Teghil R (2011) Laser ablation of graphite in water in a range of pressure from 1 to 146 atm using single and double pulse techniques for the production of carbon nanostructures. J Phys Chem C 115:5123–5130
Dupont A, Caminat P, Bournot P (1995) Enhancement of material ablation using 248, 308, 532, 1,064 nm laser pulse with a water film on the treated surface. J Appl Phys 78:2022–2028
Tunna L, O’Neill W, Khan A, Sutcliffe C (2005) Analysis of laser micro drilled holes through aluminium for micro-manufacturing applications. Opt Lasers Eng 43:937–950
Zhu S, Lu YF, Hong MH, Chen XY (2001) Laser ablation of solid substrates in water and ambient air. J Appl Phys 89:2400–2403
Berthe L, Fabbro R, Peyre P, Bartnicki E (1999) Wavelength dependent of laser shock-wave generation in the water-confinement regime. J Appl Phys 85:7552–7555
Kovalchuk T, Toker G, Bulatov V, Schechter I (2010) Laser breakdown in alcohols and water induced by λ = 1,064 nm nanosecond pulses. Chem Phys Lett 500:242–250
Kang HW, Welch AJ (2007) Effect of liquid thickness on laser ablation efficiency. J Appl Phys 101:083101
Ageev VA, Bokhonov AF, Zhukovskii VV, Yankovskii AA (1997) Dynamics of processes occurring in laser ablation of metals in a liquid. J Appl Spectrosc 64:683–688
Sakka T, Masai S, Fukami K, Ogata YH (2009) Spectral profile of atomic emission lines and effects of pulse duration on laser ablation in liquid. Spectrochim Acta B 64:981–985
Zhu S, Lu YF, Hong MH (2001) Laser ablation of solid substrates in a water-confined environment. Appl Phys Lett 79:1396–1398
Kim D, Oh B, Lee H (2004) Effect of liquid film on near-threshold laser ablation of a solid surface. Appl Surf Sci 222:138–147
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Krstulović, N., Shannon, S., Stefanuik, R. et al. Underwater-laser drilling of aluminum. Int J Adv Manuf Technol 69, 1765–1773 (2013). https://doi.org/10.1007/s00170-013-5141-4
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00170-013-5141-4