Abstract
Aiming at reducing the computer numerically controlled (CNC) machining vibration and increasing machining quality, an interpolation method for parametric tool paths with confined jounce, jerk, acceleration, and speed is proposed. An acceleration/deceleration profile with confined jounce, jerk, acceleration, and speed is proposed, and it is shown that this profile is time optimal to change the speed from one value to another under the given constraints. For a given parametric tool path, the velocity function is obtained by first computing the critical points of the tool path where the radius of curvature reaches extremal values, then determining the feasible maximal speeds at the critical points, and finally using the jounce confined acceleration/deceleration profile to connect the speeds at the adjacent critical points. A vibration experiment is conducted, which shows that vibration of the CNC machine decreases significantly for motions under confined jounce than that under confined acceleration and jerk. Simulation for two real CNC models are given to show the feasibility of the method.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
Birkhoff G, Rota G (1969) Ordinary differential equations. Blaisdell, New York
Bobrow J-E, Dubowsky S, Gibson J-S (1985) Time-optimal control of robotic manipulators along specified paths. Int J Rob Res 4(3):3–17
Erkorkmaz K, Altintas Y (2001) High speed CNC system design. Part I: jerk limited trajectory generation and quintic spline interpolation. Int J Mach Tools Manuf 41:1323–1345
Farouki RT, Tsai YF (2001) Exact Taylor series coefficients for variable-feedrate CNC curve interpolators. CAD 33(2):155–165
Gai R, Lin H, Zheng L, Huang Y (2009) Design and implementation of velocity planning algorithm for high speed machining (in Chinese). Journal for Chinese Computer Systems 30(6):1067–1071
Lai J-Y, Lin K-Y, Tseng S-J, Ueng W-D (2008) On the development of a parametric interpolator with confined chord error, feedrate, acceleration and jerk. Int J Adv Manuf Technol 37:104C121
Lee A-C, Lin M-T, Pana Y-R, Lin W-Y (2011) The feedrate scheduling of NURBS interpolator for CNC machine tools. CAD 43:612C628
Li Y-Y, Feng J-C, Wang Y-h, Yang J-G (2009) Variable-period feed interpolation algorithm for high-speed five-axis machining. Int J Adv Manuf Technol 40:769–775
Macfarlane S, Croft E-A (2003) Jerk-bounded manipulator trajectory planning: design for real-time applications. IEEE Trans Robot Autom 19:42–52
Nam S-H, Yang N-Y (2004) A study on a generalized parametric interpolator with real-time jerk-limited acceleration. Comput Aided Des 36:27–36
Park J, Nam S-H, Yang M-Y (2005) Development of a real-time trajectory generator for NURBS interpolation based on the two-stage interpolation method. Int J Adv Manuf Technol 26:359–365
Schellekensa P, Rosiellea N, Vermeulena H, Vermeulena M, Wetzelsa S, Prila W (2008) Design for precision: current status and trends. CIRP J Manuf Syst 47(2):557–586
Shiller Z (1994) On singular time-optimal control along specified paths. IEEE Trans Robot Autom 10:561–566
Timar S-D, Farouki R-T (2007) Time-optimal traversal of curved paths by Cartesian CNC machines under both constant and speed-dependent axis acceleration bounds. Robot Comput-Integr Manuf 23(5):563–579
Wang J-B, Yau H-T (2008) Real-time NURBS interpolator: application to short linear segments. Int J Adv Manuf Technol 41:1169–1185
Xu Z-M, Chen J-C, Feng Z-J (2002) Performance evaluation of a real-time interpolation algorithm for NURBS curves. Int J Adv Manuf Technol 20:270–276
Yong T, Narayanaswami R (2003) A parametric interpolator with confined chord errors, acceleration and deceleration for NC machining. CAD 35:1249–1259
Yuan C-M, Zhang K, Fan W, Gao X-S (2011) Time-optimal interpolation for CNC machining along curved tool paths with confined chord error. MM Res Preprints 30:57–89
Zhang K, Gao X-S, Li H, Yuan C-M (2010) A greedy algorithm for feedrate planning of CNC machines along curved tool paths with jerk constraints. MM Res Preprints 29:189–205
Zhang L-X, Sun R-Y, Gao X-S, Li H-B (2011) High speed interpolation for micro-line trajectory and adaptive real-time look-ahead in CNC machining. Sci China E 54(6):1481–1495
Zhang M, Yan W, Yuan C-M, Wang D-K, Gao X-S (2011) Curve fitting and optimal interpolation on CNC machines based on quadratic B-splines. Sci China F 54(7):1407–1418
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Fan, W., Gao, XS., Yan, W. et al. Interpolation of parametric CNC machining path under confined jounce. Int J Adv Manuf Technol 62, 719–739 (2012). https://doi.org/10.1007/s00170-011-3842-0
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00170-011-3842-0