Abstract
The manufacture of microproducts differs from that of conventional products in many ways, not only in the sizes, but also in issues concerning the effects of material properties, tools, and manufacturing equipment. There was a need for a new design methodology and associated design tools to aid designers in assessing the design of their microproducts by considering new micromanufacturing capabilities and constraints. A knowledge-based design advisory system (DAS) was, therefore, developed in MASMICRO in which the knowledge-based system with dedicated assessment modules and knowledge representatives based on the ontology was created to implement the distributed design and manufacturing assessment for micromanufacturing. The modules address the assessment on geometrical features relating to manufacturability, manufacturing processes, selection of materials, tools, and machines, as well as manufacturing cost. The Microsoft C# programming language, ASP.NET web technology, Prolog, and Microsoft Access database were used to develop the DAS. The test on the DAS prototype system was found to provide an increase of design efficiency due to more efficient use of design and manufacturing knowledge and afforded a web-based collaborative design environment.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
Qin Y (2006) “Micro-forming and miniature manufacturing systems—development needs and perspectives”, keynote paper (plenary address) of the 11th Int. Conf. of Metal Forming. J Mater Process Technol 177(1–3):8–18. doi:10.1016/j.jmatprotec.2006.03.212 September
Er A, Dias R (2000) A rule-based expert system approach to process selection for cast components. Knowl Based Syst 13:225–234. doi:10.1016/S0950-7051(00)00075-7
Tisza M (1995) Expert systems for metal forming. J Mater Process Technol 53:423–432. doi:10.1016/0924-0136(95)01999-U
Cheok BT, Nee AYC (1998) Trends and developments in the automation of design and manufacture of tools for metal stampings. J Mater Process Technol 75:240–252. doi:10.1016/S0924-0136(97)00370-1
Rodriguez K, Al-Ashaab A (2005) Knowledge web-based system architecture for collaborative product development. Comput Ind 56:125–140. doi:10.1016/j.compind.2004.07.004
Zha XF, Du H (2006) Knowledge-intensive collaborative design modeling and support. Part II: system implementation and application. Comput Ind 57:56–71. doi:10.1016/j.compind.2005.04.006
Li WD (2005) A web-based service for distributed process planning optimization. Comput Ind 56:272–288. doi:10.1016/j.compind.2004.12.001
Foxall J (2004) In: Hall C (ed) SAMS teach yourself Microsoft Visual C#. NET 2003 in 24 hours, 2nd edn. SAMS, Indianapolis, IN
Duthie GA (2003) In: Hamilton A (ed) Microsoft ASP.NET programming with Microsoft Visual C#.Net step by step. Microsoft, Redmond, WA
Blanton A (2004) In: Blanton A (ed) Microsoft Office Access 2003 step by step. Microsoft, Redmond, WA
Sing WM, Rao KP (1997) Knowledge-based process layout system for axisymmetrical deep drawing using decision tables. Comput Ind Eng 32(2):299–319
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Dai, X., Qin, Y., Ma, L. et al. A knowledge-based design advisory system for collaborative design for micromanufacturing. Int J Adv Manuf Technol 47, 973–979 (2010). https://doi.org/10.1007/s00170-009-2136-2
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00170-009-2136-2