Abstract
Resistance spot welding (RSW) is typically used in automobile body assembly, where continuous efficiency depends on electrode life, which is closely related with the water cooling effect. In this paper, the finite element simulation and response surface analysis methods are adopted to optimize the RSW electrode cooling process. Aiming to optimal cooling parameters and improve cool effect, we present a special sphere-shape weld cap with inlet pipe and cooling cavity and model its cooling effect as non-linear polynomial equations, which can avoid numerous influential factors. Electrode parameters, including pipe diameter, pipe height and flow velocity, are adjusted according to these non-linear equations. Optimization is carried out subsequently and experimental measurements on electrode diameters are performed for validation. It is found that the response surface model not only indicates the direction of design modification, but also leads to an optimal method for electrode design.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
Zhang XQ, Chen GL, Zhang YS (2008) Characteristics of electrode wears in resistance spot welding dual-phase steels. Mater Des 29(1):279–283 DOI 10.1016/j.matdes.2006.10.025
Rashid M, Fukumoto S, Medley JB (2007) Influence of lubricants on electrode life in resistance spot welding of aluminum alloys. Weld J (Miami, Florida) 86(3):62–70
Zhang XQ, Chen GL, Zhang YS (2006). On-line evaluation of electrode wear by servo gun in resistance spot welding. Int J Adv Manuf Technol, DOI 10.1007/s00170-006-0885-8
Wei L (2005) Modeling and on-line estimation of electrode wear in resistance spot welding. J Manuf Sci Eng 127(11):709–717
Kim E, Eagar TW (1998) Transient thermal behavior in resistance spot welding. Proceedings, Sheet Metal Welding Conference 2 (AWS-Detroit Section, Southfield, MI). Oct. Paper 2
Hensel FR, Larson EI, Holt EF (1941) Thermal gradients in spot welding electrodes. Weld J :850–856, Dec
Hirsch R (1996) Influence of water temperature and flow on electrode life. Proceedings, Sheet Metal Welding Conference 7 (AWS-Detroit Section, Troy, MI). Oct. Paper E3
IIW Working Group (1972) Welding of coated sheets, recommended practice for spot-welding zinc-coated steel sheets. Welding in the World 10(3/4)
Hensel FR, Larson EI, Holt EF (1942) Refrigerant-cooled spot-welding electrodes. Weld J Res Suppl 12:583–597
Lavery RC, Williams NT (1969) Resistance spot welding electrode wear on galvannealed steels. Metal Constr British Weld J 2:231–238
Yeung KS, Thornton PH (1999) Transient thermal analysis of spot welding electrodes. Weld J (Miami, Florida) 78(1):1–6
Davis LD (1991) Handbook of generic algorithms. Van Nostrand Reinhold, New York
Lin JC (2003) The Optimal Design of a Cooling System for a Die-Casting Die With a Free Form Surface. Adv Manuf Technol 21:612–619
Beal VE, Erasenthiran P, Hopkinson N, Dickens P, Ahrens CH (2006) Optimisation of processing parameters in laser fused H13/Cu materials using response surface method (RSM). J Mater Process Technol 174(1–3):145–154
Thornton PH, Krause AR, Davies RG (1995) Spot weld brazing of aluminum alloys. Proc. Int. Symp. Met. Adv. Vancouver, BC, Light Metals Industries, CIM, pp 217–228
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Lai, X.M., Luo, A.H., Zhang, Y.S. et al. Optimal design of electrode cooling system for resistance spot welding with the response surface method. Int J Adv Manuf Technol 41, 226–233 (2009). https://doi.org/10.1007/s00170-008-1478-5
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00170-008-1478-5