Abstract
Grain structure is an important and readily observable feature in aluminum alloy castings. Depending on the constitutional and heat-flow conditions in a solidified aluminum alloy, various morphologies are possible. Grain refining is one of the predominant techniques in controlling the quality of castings. It plays a vital role in improving metallurgical characteristics and mechanical properties of aluminum alloys. Fine equiaxed grains ensure remarkable benefits. There are a number of techniques to achieve fine equiaxed grain structure, but grain refinement by the addition of grain refiners referred to as inoculation is the most popular due to its simplicity. Grain refinement has been studied extensively by researchers for several decades, not only for developing efficient grain refiners but also for achieving an understanding of the mechanism of grain refinement. In spite of its commercial importance, benefits and numerous scientific studies in this area, the grain refinement of aluminum and its alloys is still a controversial subject. Solute elements like titanium segregate to the inoculants/melt interface affecting the dendrites and also affect the constitutional undercooling at the solid–liquid interface. This segregating power of an element is quantified by the growth restricting factor (GRF). In the present investigation, the effect of GRF on grain refinement of aluminum-silicon alloys was studied by the addition of Al-5Ti-1B master alloy. It is evident from this investigation that the growth rate of grains is inversely proportional to the GRF.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
Cibula A (1949–50) Grain refinement of aluminium alloy by TiC. J Inst Metals 76:321–360
McCartney DG (1989) Grain refining of aluminium and its alloys using inoculants. Int Mater Rev 34(5):247–260
Crossley FA, Mondolfo LF (1951) Mechanism of grain refinement in aluminium alloys. Trans AIME 191:1143–1151, (December 1951)
Flemings MC (1974a) Solidification processing. In: Stephen M et al (eds) McGraw-Hill Inc., USA, Chap. 5, p 135
Flemings MC (1974b) Solidification processing. In: Stephen M et al (eds) McGraw-Hill Inc., USA, Chap. 5, p 151
Johnsson M, Backerud L (1996) Z Meta Kd 87:216
Kurz W, Fisher DJ (1984) Fundamentals of solidification. Trans. Tech. Publications, Switzerland, p 47
Li H, Sritharan T, Lam YM, Leng NY (1997) J Mater Sci Technol 66:253
Easton M, St. John D (1999) Grain refinement of aluminium alloys: Part I. The nucleant and solute paradigms - a review of the literature. Metall Mater Trans 30A:1613–1623, (June 1999)
Johnsson M, Backerud L, Sigworth GK (1993) Study of the mechanism of grain refinement of aluminium after additions of Ti - and B - containing master alloys. Metall Trans 24A:481–491, February
Spittle JA, Sadli S (1995) Mater Sci Technol 11:533–537
Spittle JA, Keeble JM, AlMeshedani M (1997) Light metals. In: Huglen R (ed) TMS, Warrendale, PA, p 795
Volmer M, Weber A (1925) Z Krift Phys Chem 119:277
Kim WT, Cantor B, Griffith WD, Jolly MR (1992) Int J Rapid Solidif 7:245–254
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Chandrashekar, T., Muralidhara, M.K., Kashyap, K.T. et al. Effect of growth restricting factor on grain refinement of aluminum alloys. Int J Adv Manuf Technol 40, 234–241 (2009). https://doi.org/10.1007/s00170-007-1336-x
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00170-007-1336-x