Abstract
The aim of the present work is to determine the amount of dissipated and stored energies in structures containing frictional cracks and elasto-plastic zones. The proposed theory combines micromechanical and thermodynamic tools to calculate both energies. Using simple examples, it is shown that the Taylor–Quinney coefficient is not a constant, and can be much less than the values usually considered (i.e. close to unity).
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
Al’tshuler L.V.: Use of shock waves in high pressure physics. Soviet Phys. Uspekhi 8(1), 52–91 (1965)
El Wahabi M., Gavard L., Montheillet F., Cabrera J.M., Prado J.M.: Effect of initial grain size on dynamic recrystallization in high purity austenitic stainless steels. Acta Mater. 53, 4605–4612 (2005)
Abeyaratne R., Knowles J.K.: Impact-induced phase transitions in thermoelastic solids. Phil. Trans. R. Soc. Lond. A 355, 843–867 (1997)
Bowden F.P., Yoffe A.F.: Initiation and Growth of Explosion in Liquids and Solids. Cambridge University Press, Cambridge, UK (1952)
Chen H.C., Lasalvia J.C., Nesterenko V.F., Meyers M.A.: Shear localization and chemical reaction in high strain, high strain-rate deformation of Ti–Si mixture powders. Acta Mater. 46(9), 3033–3046 (1998)
Marchand A., Duffy J.: An experimental study of the formation process of adiabatic shear bands in a structural steel. J. Mech. Phys. Solids 36(3), 251–283 (1988)
Dinzart F., Molinari A.: Structure of adiabatic shear bands in thermo-viscoplastic materials. Eur. J. Mech. A/Solids 17, 923–938 (1998)
Wu L., Liu S., Wu Y., Wang C.: Precursors for rock fracturing and failure. Part I. IRR image abnormalities. Int. J. Rock Mech. Mining Sci. 43, 473–482 (2006)
Bjornerud M., McLoughlin J.F.: Pressure-related feedback processes in the generation of pseudotachylytes. J. Struct. Geol. 26, 2317–2323 (2004)
Taylor G.I., Quinney H.: The latent energy remaining in a metal after cold working. Proc. R. Soc. Lond. A 143, 307–326 (1934)
Chrysochoos A., Maisonneuve O., Martin G., Caumon H., Chezeaux J.-C.: Plastic and dissipated work and stored energy. Nucl. Eng. Des. 114, 323–333 (1989)
Mason J.J., Rosakis A.J., Ravichandran G.: On the strain and strain rate dependence of the fraction of plastic work converted to heat: an experimental study using high speed infrared detectors and the Kolsky bar. Mech. Mater. 17, 135–145 (1994)
Kapoor R., Nemat-Nasser S.: Determination of temperature rise during high strain rate deformation. Mech. Mater. 27, 1–12 (1998)
Oliferuk W., Maj M., Raniecki B.: Experimental analysis of energy storage rate components during tensile deformation of polycrystals. Mater. Sci. Eng. A 374, 77–81 (2004)
Adams G.W., Farris R.J.: Latent energy of deformation of amorphous polymers. 1. Deformation calorimetry. Polymer 30, 1824–1828 (1989)
Hasan O.A., Boyce M.C.: Energy storage during inelastic deformation of glassy polymers. Polymer 34, 5085–5092 (1993)
Rittel D.: On the conversion of plastic work to heat during high strain rate deformation of glassy polymers. Mech. Mater. 31, 131–139 (1999)
Chrysochoos A., Louche H.: An infrared image processing to analyse the calorific effects accompanying strain localisation. Int. J. Eng. Sci. 38, 1759–1788 (2000)
Bonnet-Lebouvier A.-S., Molinari A., Lipinski P.: Analysis of the dynamic propagation of adiabatic shear bands. Int. J. Solids Struct. 39(16), 4249–4269 (2002)
Ranc N., Wagner D.: Some aspects of Portevin-Le Chatelier plastic instabilities investigated by infrared pyrometry. Mater. Sci. Eng. A 394(1–2), 87–95 (2005)
Rittel D., Wang Z.G., Merzer M.: Adiabatic shear failure and dynamic stored energy of cold work. Phys. Rev. Lett. 96, 075502 (2006)
Yang Y., Wang B.F.: Dynamic recrystallization in adiabatic shear band in titanium. Mater. Lett. 60(17–18), 2198–2202 (2006)
Wei Y., Anand L.: On micro-cracking, inelastic dilatancy, and the brittle–ductile transition in compact rocks: a micromechanical study. Int. J. Solids Struct. 45, 2785–2798 (2008)
Field J.E., Swallowe G.M., Heavens S.M.: Ignition mechanisms of explosives during mechanical deformation. Proc. R. Soc. Lond. A 382, 231–244 (1992)
Dienes J.K.: A unified theory of flow, hot spots, and fragmentation, with an application to explosive sensitivity. In: Davison, L., Grady, D.E., Shahinpoor, M. (eds) High Pressure Shock Compression of Solids II, pp. 366–398. Springer, Berlin (1996)
Bennett J.G., Haberman K.S., Johnson J.N., Asay B.W., Henson B.F.: A constitutive model for the non-shock ignition and mechanical response of high explosives. J. Mech. Phys. Solids 46(12), 2303–2322 (1998)
Bever M.B., Holt D.L., Titchener A.L.: The stored energy of cold work. In: Chalmers, B., Christian, J.W., Massalski, T.B. (eds) Prog. Mat. Sci., vol. 17, Pergamon Press, NY, USA (1973)
Burr A., Hild F., Leckie F.A.: Micromechanics and continuum damage mechanics. Arch. Appl. Mech. 65, 437–456 (1995)
Boudon-Cussac D., Hild F., Pijaudier-Cabot G.: Tensile damage in concrete: analysis of an experimental technique. J. Eng. Mech. ASCE 125(8), 906–913 (1999)
Aravas N., Kim K.-S., Leckie F.A.: On the calculations of the stored energy of cold work. ASME J. Eng. Mater. Technol. 112, 465–470 (1990)
Halm D., Dragon A.: An anisotropic model of damage and frictional sliding for brittle materials. Eur. J. Mech. A/Solids 17(3), 439–460 (1998)
Pensée V., Kondo D., Dormieux L.: Micromechanical analysis of anisotropic damage in brittle materials. J. Eng. Mech. 128(8), 889–897 (2002)
Andrieux S., Bamberger Y., Marigo J.-J.: Un modèle de matériau microfissuré pour les bétons et les roches. J. Méc. Théor. Appl. 5, 471–513 (1986)
Hill R.: The essential structure of constitutive laws for metal composites and polycrystals. J. Mech. Phys. Solids 15, 79–95 (1967)
Mandel J.: Contribution théorique à l’étude de l’écrouissage et des lois de l’écoulement plastique. In: Becker, E. (ed.) Proc. 11th Int. Cong. Appl. Mech., pp. 502–509. Springer, Berlin, RFA (1964)
Volterra V.: Sur l’équilibre des corps élastiques multiplement connexes. Annales Scientifiques de l’Ecole Normale Supérieure, Paris (France) 24, 401–518 (1907)
Love A.E.H.: The Mathematical Theory of Elasticity. Cambridge University Press, Cambridge (1927)
Vivier, G., Hild, F., Labrunie, M., Lambert, P., Trumel, H.: Studying and modelling a pressed HMX-based energetic material. In: 17th DYMAT Tech. Meeting, September 6–7. Cambridge, UK (2007)
Coleman B.D., Gurtin M.E.: Thermodynamics with internal state variables. J. Chem. Phys. 47(2), 597–613 (1967)
Germain P., Nguyen Q.S., Suquet P.: Continuum thermodynamics. ASME J. Appl. Mech. 50, 1010–1020 (1983)
Lemaitre J., Chaboche J.-L.: Mechanics of Solid Materials. Cambridge University Press, Cambridge (1990)
Author information
Authors and Affiliations
Corresponding author
Additional information
Communicated by W.H. Müller
Rights and permissions
About this article
Cite this article
Vivier, G., Trumel, H. & Hild, F. On the stored and dissipated energies in heterogeneous rate-independent systems: theory and simple examples. Continuum Mech. Thermodyn. 20, 411–427 (2009). https://doi.org/10.1007/s00161-008-0089-6
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00161-008-0089-6