Abstract
The computational design of a composite where the properties of its constituents change gradually within a unit cell can be successfully achieved by means of a material design method that combines topology optimization with homogenization. This is an iterative numerical method, which leads to changes in the composite material unit cell until desired properties (or performance) are obtained. Such method has been applied to several types of materials in the last few years. In this work, the objective is to extend the material design method to obtain functionally graded material architectures, i.e. materials that are graded at the local level (e.g. microstructural level). Consistent with this goal, a continuum distribution of the design variable inside the finite element domain is considered to represent a fully continuous material variation during the design process. Thus the topology optimization naturally leads to a smoothly graded material system. To illustrate the theoretical and numerical approaches, numerical examples are provided. The homogenization method is verified by considering one-dimensional material gradation profiles for which analytical solutions for the effective elastic properties are available. The verification of the homogenization method is extended to two dimensions considering a trigonometric material gradation, and a material variation with discontinuous derivatives. These are also used as benchmark examples to verify the optimization method for functionally graded material cell design. Finally the influence of material gradation on extreme materials is investigated, which includes materials with near-zero shear modulus, and materials with negative Poisson’s ratio.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
Allaire G (2002) Shape optimization by the homogenization method. Applied mathematical sciences, vol 146. ISBN-10: 0387952985. Springer, New York
Bendsøe MP, Kikuchi N (1988) Generating optimal topologies in structural design using a homogenization method. Comput Methods Appl Mech Eng 71(2):197–224
Bendsøe MP, Sigmund O (2003) Topology optimization: theory, methods and application. Springer, Berlin
Bruyneel M, Duysinx P, Fleury C (2002) A family of MMA approximations for structural optimization. Struct Multidisc Optim 24(4):263–276
Carbonari RC, Silva ECN, Paulino GH (2007) Topology optimization design of functionally graded bimorph-type piezoelectric actuators. Smart Mater Struct 16(6):2605–2620
Chen BC, Silva ECN, Kikuchi N (2001) Advances in computational design and optimization with application to MEMS. Int J Numer Methods Eng 52(1–2):23–62
Cherkaev A (2000) Variational methods for structural optimization. Applied mathematical sciences, vol 140. ISBN-10: 0387984623. Springer, New York
Cherkaev A, Gibiansky LV (1993) Coupled estimates for the bulk and shear moduli of a 2-dimensional isotropic elastic composite. J Mech Phys Solids 41(5):937–980
Cherkaev A, Gibiansky LV (1996) Extremal structures of multiphase heat conducting composites. Int J Solids Struct 33(18):2609–2623
Cherkaev A, Kohn R (1997) Topics in the mathematical modelling of composite materials. ISBN-10: 3764336625. Birkhauser, Boston
Cox SJ, Dobson DC (1999) Maximizing band gaps in two-dimensional photonic crystals. SIAM J Appl Math 59(6):2108–2120
Cox SJ, Dobson DC (2000) Band structure optimization of two-dimensional photonic crystals in H-polarization. J Comput Phys 158(2):214–224
Crumm AT, Halloran JW (1998) Fabrication of microconfigured multicomponent ceramics. J Am Ceram Soc 81(4):1053–1057
Crumm AT, Halloran JW, Silva ECN, de Espinosa FM (2007) Microconfigured piezoelectric artificial materials for hydrophones. J Mater Sci 42(11):3944–3950
Diaz AR, Benard A (2003) Designing materials with prescribed elastic properties using polygonal cells. Int J Numer Methods Eng 57(3):301–314
Gibiansky LV, Sigmund O (2000) Multiphase composites with extremal bulk modulus. J Mech Phys Solids 48(3):461–498
Gibiansky LV, Torquato S (1995) Rigorous link between the conductivity and elastic-moduli of fiber-reinforced composite-materials. Philos Trans R Soc Lond Ser A Math Phys Sci 353(1702):243–278
Gibiansky LV, Torquato S (1999) Matrix laminate composites: realizable approximations for the effective moduli of piezoelectric dispersions. J Mater Res 14(1):49–63
Guedes JM, Kikuchi N (1990) Preprocessing and postprocessing for materials based on the homogenization method with adaptive finite-element methods. Comput Methods Appl Mech Eng 83(2):143–198
Guedes JM, Rodrigues HC, Bendsøe MP (2003) A material optimization model to approximate energy bounds for cellular materials under multiload conditions. Struct Multidisc Optim 25(5–6):446–452
Guest JK, Prévost JH, Belytschko T (2004) Achieving minimum length scale in topology optimization using nodal design variables and projection functions. Int J Numer Methods Eng 61:238–254
Hashin Z, Shtrikman S (1963) A variational approach of the theory of elastic behavior of multiphase materials. J Mech Phys Solids 11:127–140
Kim JH, Paulino GH (2002) Isoparametric graded finite elements for nonhomogeneous isotropic and orthotropic materials. ASME J Appl Mech 69(4):502–514
Kohn RV, Strang G (1986a) Optimal design and relaxation of variational problems, part I. Commun Pure Appl Math 39(1):113–137
Kohn RV, Strang G (1986b) Optimal design and relaxation of variational problems, part II. Commun Pure Appl Math 39(2):139–182
Kohn RV, Strang G (1986c) Optimal design and relaxation of variational problems, part III. Commun Pure Appl Math 39(3):353–377
Larsen UD, Sigmund O, Bouwstra S (1997) Design and fabrication of compliant micromechanisms and structures with negative Poisson’s ratio. J Microelectromechanical Syst 6(2):99–106
Lipton R, Northrup J (1994) Optimal bounds on the inplane shear moduli for orthotropic elastic composites. SIAM J Appl Math 54(2):428–442
Matsui K, Terada K (2004) Continuous approximation of material distribution for topology optimization. Int J Numer Methods Eng 59:1925–1944
Mazumder J, Schifferer A, Choi J (1999) Direct materials deposition: designed macro and microstructure. Mater Res Innov 3(3):118–131
Mazumder J, Dutta D, Kikuchi N, Ghosh A (2000) Closed loop direct metal deposition: art to part. Opt Lasers Eng 34(4–6):397–414
Milton GW, Cherkaev AV (1995) Which elasticity tensors are realizable? J Eng Mater Technol Trans ASME 117(4): 483–493
Miyamoto Y, Kaysser WA, Rabin BH, Kawasaki A, Ford RG (1999) Functionally graded materials: design, processing and applications. Kluwer Academic, Dordrecht
Murat F, Tartar L (1985) Optimality conditions and homogenization. In: Mario A, Modica L, Spagnolo S (eds) Nonlinear variational problems. Pitman, Boston, pp 1–8
Neves MM, Rodrigues H, Guedes JM (2000) Optimal design of periodic linear elastic microstructures. Comput Struct 76(1–3):421–429
Neves MM, Sigmund O, Bendsøe MP (2002) Topology optimization of periodic microstructures with a penalization of highly localized buckling modes. Int J Numer Methods Eng 54(6):809–834
Paulino GH, Jin Z-H, Dodds Jr RH (2003) Failure of functionally graded materials. In: Karihaloo B, Knauss WG (eds) Comprehensive structural integrity, vol 2, chapter 13. Elsevier Science, Oxford, pp 607–644
Paulino GH, Silva ECN (2005) Design of functionally graded structures using topology optimization. Mat Sci Forum 492–493:435–440
Pindera M-J, Aboudi J, Arnold SM (1995) Limitations of the uncoupled, RVE-based micromechanical approach in the analysis of functionally graded composites. Mech Mater 20(1):77–94
Qi H, Kikuchi N, Mazumder J (2004) Interface study and boundary smoothing on designed composite material microstructures for manufacturing purposes. Struct Multidisc Optim 26(5):326–332
Qi J, Halloran JW (2004) Negative thermal expansion artificial material from iron-nickel alloys by oxide co-extrusion with reductive sintering. J Mater Sci 39(13):4113–4118
Rahmatalla S, Swan CC (2003) Form finding of sparse structures with continuum topology optimization. ASCE J Struct Eng 129(12):1707–1716
Rahmatalla SF, Swan CC (2004) A Q4/Q4 continuum topology optimization implementation. Struct Multidisc Optim 27:130–135
Reiter T, Dvorak GJ, Tvergaard V (1997) Micromechanical models for graded composite materials. J Mech Phys Solids 45(8):1281–1302
Sanchez-Palencia E (1980) Non-homogeneous media and vibration theory. Lectures notes in physics 127. Springer, Berlin
Sigmund O (1994) Materials with prescribed constitutive parameters—an inverse homogenization problem. Int J Solids Struct 31(17):2313–2329
Sigmund O (1995) Tailoring materials with prescribed elasticproperties. Mech Mater 20(4):351–368
Sigmund O (2000) A new class of extremal composites. J Mech Phys Solids 48(2):397–428
Sigmund O, Jensen JS (2003) Systematic design of phononic band-gap materials and structures by topology optimization. Philos Trans R Soc Lond Ser A Math Phys Sci 361(1806):1001–1019
Sigmund O, Torquato S (1996) Composites with extremal thermal expansion coefficients. Appl Phys Lett 69(21): 3203–3205
Sigmund O, Torquato S (1997) Design of materials with extreme thermal expansion using a three-phase topol ogy optimization method. J Mech Phys Solids 45(6):1037–1067
Sigmund O, Torquato S (1999) Design of smart composite materials using topology optimization. Smart Mater Struc 8(3):365–379
Sigmund O, Torquato S, Aksay IA (1998) On the design of 1–3 piezocomposites using topology optimization. J Mater Res 13(4):1038–1048
Silva ECN, Fonseca JSO, Kikuchi N (1998) Optimal design of periodic piezocomposites. Comput Methods Appl Mech Eng 159(1–2):49–77
Silva ECN, Fonseca JSO, de Espinosa FM, Crumm AT, Brady GA, Halloran JW, Kikuchi N (1999a) Design of piezocomposite materials and piezoelectric transducers using topology optimization - Part I. Arch Comput Methods Eng 6(2):117–182
Silva ECN, Nishiwaki S, Fonseca JSO, Kikuchi N (1999b) Optimization methods applied to material and flextensional actuator design using the homogenization method. Comput Methods Appl Mech Eng 172(1–4):241–271
Silva ECN, Paulino GH (2004) Topology optimization applied to the design of functionally graded material (FGM) structures. In: Proceedings of 21st international congress of theoretical and applied mechanics (ICTAM) 2004, 15–21 August 2004, Warsaw
Smith WA (1992) Limits to the enhancement of piezoelectric transducers achievable by materials engineering. Proc IEEE Ultrason Symp 1:697–702
Suresh S, Mortensen A (1988) Fundamentals of functionally graded materials. IOM Communications, London
Svanberg K (1987) The method of moving asymptotes—a new method for structural optimization. Int J Numer Methods Eng 24:359–373
Torquato S (2002) Random heterogeneous materials—microstructure and macroscopic properties. ISBN-10: 0387951679. Springer, New York
Torquato S, Hyun S, Donev A (2003) Optimal design of manufacturable three-dimensional composites with multifunctional characteristics. J Appl Phys 94(9):5748–5755
Van Hoy C, Barda A, Griffith M, Halloran JW (1998) Microfabrication of ceramics by co-extrusion. J Am Ceram Soc 81(1):152–158
Yin HM, Sun LZ, Paulino GH (2004) Micromechanics-based elastic model for functionally graded materials with particle interactions. Acta Mater 52(12):3535–3543
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Paulino, G.H., Silva, E.C.N. & Le, C.H. Optimal design of periodic functionally graded composites with prescribed properties. Struct Multidisc Optim 38, 469–489 (2009). https://doi.org/10.1007/s00158-008-0300-1
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00158-008-0300-1