Abstract.
Bonded lingual retainers (individually adjusted multistranded wires with one bond site per tooth) are used extensively to maintain the orthodontic treatment result. Failure or loss often leads to a relapse.
The bond strength of bonded lingual retainers has not yet been studied in respect of the loads that can be withstood by them through deflection of the interdental archwire region. Furthermore, human anterior teeth have never before been used for a study of this kind.
Six different wire/composite combinations were studied (wires: Dentaflex® co-axial 0.018”, Dentaflex® multistranded 0.018”, and Respond® Dead Soft straight, length 0.0175”; composites: Tetric® Flow and Heliosit® Orthodontic) by bonding 1 cm lengths of wire to the lingual surfaces of 360 extracted lower anterior teeth. Using an Instron 6025 universal testing machine, vertical shear bond strength tests at the bond site as well as vertical shear bond strength tests and horizontal tensile strength tests were performed. The failure characteristics after failure at maximum force were evaluated by light microscopy, scanning electron microscopy, and morphometry. Most failures were observed at the enamel/composite interface. The selected wires displayed no significant differences; Tetric® Flow proved to be the most stable resin; and no enamel tear-outs were observed.
Zusammenfassung.
Geklebte Lingualretainer (individuell angepasste verseilte Drähte mit je einem Klebepunkt pro Zahn) werden für die Rezidivprophylaxe extensiv verwendet. Bruch oder Verlust führt oft zum Rezidiv.
Die Haftkraft von Drahtretainern wurde bisher noch nicht dahingehend untersucht, welchen Belastungen sie durch Auslenkung des interdentalen Drahtbereiches standhalten können. Außerdem wurden menschliche Frontzähne für Untersuchungen dieser Art noch nie verwendet.
Sechs verschiedene Draht-Komposit-Kombinationen (Drähte: Dentaflex® co-axial 0.018“, Dentaflex® verseilt 0.018“, Respond® Dead Soft straight 0.0175“ und Komposite: Tetric® Flow und Heliosit® Orthodontic) wurden untersucht, wobei an die Lingualflächen von 360 extrahierten Unterkieferfrontzähnen je 1 cm Draht adhäsiv befestigt wurde. In der Universalprüfmaschine Instron 6025 wurden vertikale Abscherversuche an der Klebestelle sowie vertikale Abscher-Zug-Versuche und horizontale Abzugversuche vorgenommen. Die Bruchcharakteristik nach Abriss bei maximaler Kraft wurde lichtmikroskopisch, rasterelektronenmikroskopisch und morphometrisch bestimmt.
Die Mehrzahl der Brüche kam an der Schmelz-Komposit-Verbindungsfläche vor. Die Auswahl der Drähte zeigte keine statistisch signifikanten Unterschiede; Tetric® Flow erwies sich als der stabilste Kleber; Schmelzausrisse wurden nicht beobachtet.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Radlanski, R.J., Zain, N.D. Stability of the Bonded Lingual Wire Retainer—A Study of the Initial Bond Strength. J Orofac Orthop 65, 321–335 (2004). https://doi.org/10.1007/s00056-004-0401-4
Received:
Accepted:
Issue Date:
DOI: https://doi.org/10.1007/s00056-004-0401-4