Abstract
This paper summarizes the experimental results and engineering aspects regarding the anodic process for electrorefining irradiated EBR-II driver fuel assemblies. This work is part of a demonstration project for the Department of Energy (DOE) to treat spent nuclear fuel. The focus of this paper is on the anode due to its unique geometry, complex chemical compositions and highly demanding process goals. Chemical analysis results of cladding hull samples were used as the key criteria to evaluate the effectiveness of the uranium dissolution and noble metal retention. A parametric study indicated that the diffusion of reactants in the porous fuel matrix was the rate-controlling step to the uranium dissolution from the chopped fuel segments. Anode resistance was the most effective parameter to assess the completeness of uranium dissolution and noble metal retention.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
Bard, A.J., Encyclopedia of Electrochemistry of The Elements, Vol. X, Fused Salt Systems, p. 68, Marcel Dekker, Inc., New York (1976).
Benedict, R.W., and McFarline, H.F., 1998, “EBR-II spent fuel treatment demonstration project status,” Radwaste, Vol. 5, No. 23, p. 4.
Chang, Y.I., 1990, “The integral fast reactor,” Nucl. Technol, Vol. 88, p. 129.
Despic, A R., 1983, in Comprehensive Treatise of Electrochemistry,” E. Conway and J. O’ M Bockris, VII, eds., p. 451–526, Plenum Press, New York.
Despic, A.R., and Popov, K.I., 1971, “The effect of pulsating potential on the morphology of metal deposits obtained by mass-transport controlled electrodeposition,” J. Appl. Electrochem, 1,275.
Despic, A.R., and Popov, K.I., 1972, in Modern Aspects of Electrochemistry, B.E. Conway and J. O’M Bockris, VII, eds., p. 199–313, Plenum Press, New York.
Duan, S.Z., et al., 1990, Molten Salt Chemistry — Principle and Application, p. 201, The Metallurgical Industry Press, China.
Inman, D., et al., 1959, “Electrode reaction in molten salt,” Trans. Farad. Sci., Vol. 55 C, p. 1904.
Keiser, D.D., Jr., and Mariani, R.D., “Zr-rich layers electrodeposited onto stainless steel cladding during the electrorefining of EBR-II fuel,” J. Nucl. Mater., Vol. 270, p. 279.
Kobayashi, T., et al., 1995, “Polarization effect in the molten salt electrorefining of spent nuclear fuel,” J. Nucl. Sci. Technol., Vol. 32, p. 7.
Levenspiel, O., 1972, Chemical Reaction Engineering, second edition, John Wiley and Sons, Inc., pp. 360–368.
Li, S.X., 2000, “Anodic behaviors of uranium and zirconium during electrorefining spent nuclear fuel in molten salt,” in Proceedings of ICONE-8, ASME, Baltimore, Maryland.
Li, S.X., et al., 1998, “Initial results for the electrochemical dissolution of spent EBR-II fuel,” in Proceedings of DOE Spent Nuclear Fuel and Fissile Material Management, p. 655, American Nuclear Society, Charleston, South Carolina.
National Research Council, 2000, Electrometallurgical Techniques for DOE Spent Fuel Treatment: Final Report,” National Academy Press, Washington, DC.
Plambeck, J.A., 1967, “Electromotive force series in molten salts,” J. Chem. Engin. Data, Vol. 12, p. 1.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Li, S.X., Simpson, M.F. Anodic process of electrorefining spent driver fuel in molten LiCl-KCl-UCl3/Cd system. Mining, Metallurgy & Exploration 22, 192–198 (2005). https://doi.org/10.1007/BF03403322
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/BF03403322