Abstract
This article deals with the influence of processing parameters of a new procedure for ferritic rolling on the recrystallized microstructure of extra-low-carbon (ELC) steels. Parameters such as coil transfer temperature and degree of reduction during ferritic rolling are shown to control the morphology of cementite particles and the precipitation of AlN process. The recrystallized grain morphology and the percentage of recrystallization after annealing cycles simulating the industrial coiling process are shown to be strongly influenced by processing parameters.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
D. Liu, A.O. Humphreys, M.R. Toroghinezhad, and J.J. Jonas:Iron Steel Inst. Jpn. Int., 2002, vol. 42, pp. 751–59.
M.R. Barnett and J.J. Jonas:Iron Steel Inst. Jpn. Int., 1991, vol. 39, pp. 856–73.
M.R. Barnett, J.J. Jonas, and P.D. Hodson:37th Mechanical Working and Steel Processing Conf., I. Sadler, ed., ISS, Warrendale, PA, 1996, vol. XXXIII, pp. 971–77.
A.O. Humphreys, D.S. Liu, M.R. Toroghinezhad, and J.J. Jonas:Iron Steel Inst. Jpn. Int., 2002, vol. 42 (Suppl.), pp. S52-S56.
M.R. Toroghinejad, A.O. Humphreys, F. Ashrafizadeh, A. Najafizadeh, and J.J. Jonas:Mater. Sci. Forum, 2003, vols. 426–432, pp. 3691–96.
A. De Paepe and J.C. Herman:41st MWSP Conf. Proc., I. Sadler, ed., ISS, Warrendale, PA, 1999, vol. XXVII, p. 951.
J.C. Herman, A. De Paepe, and V. Leroy:Thermec ’97, Int. Conf. on Thermomechanical Processing of Steels and Other Materials, T. Chandra and T. Sakai, eds., TMS, Warrendale, PA, 1997, pp. 507–14.
ECSC-Project No. 710-PA-PC/036 (97-D3.04a-c), Draft Final Report, Mar. 2001.
E. Vasseur, H. Réglé, E. Pinto Da Costa, and Y. Raulet:Proc. Int. Conf. on Thermomechanical Processing of Steels, May 24–26, 2000, IOM Communications, 2000, pp. 615–24.
Y. Meyzaud and P. Parnière:Mém. Scientif. Rev. Métall., 1974, vol. LXXI, pp. 423–34.
J.T. Michalak and R.D. Schoone:Trans. TMS-AIME, 1968, vol. 242, pp. 1149–60.
W.B. Hutchinson:Int. Met. Rev., 1984, vol. 29, pp. 25–42.
N. Lavaire, V. Massardier, and J. Merlin:Scripta Mater., 2004, vol. 50, pp. 131–35.
C. García de Andrés, G. Caruana, and L.F. Alvarez:Mater. Sci. Eng., A, 1998, vol. A241, pp. 211–18.
F.S. Lepera:J. Met., 1980, vol. 32, pp. 389–39.
G.F. Vander Voort:Metallography. Principles and Practice, McGraw-Hill Book Company, New York, NY, 1984, p. 427.
A. Ney and J. Luiggi:Metall. Mater. Trans. A, 1998, vol. 29A, pp. 2669–73.
A. Fukami:Specimen Preparation Techniques for Electron Microscopy, Jeol News, Tokio, 1967, pp. 5–7.
Metallurgical and Thermochemical Databank, National Physical Laboratory, Teddington, Middlesex, United Kingdom, 1996, p. 1.
R.K. Ray, J.J. Jonas, and R.E. Hook:Int. Mater. Rev., 1994, vol. 39, pp. 129–57.
N. Lavaire, J. Merlin, and V. Sardoy:Scripta Mater., 2001, vol. 44, pp. 553–60.
W.C. Leslie, R.L. Rickett, C.L. Dotson, and C.S. Watson:Trans. ASM, 1954, vol. 46, pp. 1470–99.
R.H. Goodenow:ASM Trans. Q., 1966, vol. 59, p. 804.
N. Hansen:Mém. Scientif. Rev. Métall., 1975, vol. 72, pp. 189–203.
F.J. Humphreys:Acta Metall., 1977, vol. 25, pp. 1321–44.
U. Koster:Recrystallization of Metallic Materials, F. Haessner, ed., Dr. Riedler Verlag, Stuttgart, 1971, p. 215.
F.J. Humphreys and M. Hatherly:Recrystallization and Related Annealing Phenomena, Pergamon Press, Oxford, United Kingdom, 1995, p. 127.
F.J. Humphreys:Met. Sci., 1979, vol. 13, pp. 136–45.
H. Inagaki:Iron Steet Inst. Jpn. Int., 1994, vol. 34 (4), pp. 313–21.
Ph. Aubrun and P. Rocquet:Mém. Scientif. Rev. Métallurg., 1973, vol. LXX (4), pp. 260–69.
Ph. Aubrun and P. Rocquet:Mém. Scientif. Rev. Métallurg., 1973, vol. LXX (7–8), pp. 569–75.
H. Inagaki:Z. Metallkd., 1987, vol. 78, pp. 630–38.
H. Inagaki:Z. Metallkd., 1993, vol. 82, pp. 99–107.
H. Inagaki:Z. Metallkd., 1993, vol. 82, pp. 26–33.
A. Brahmi and R. Borrelly:Acta Mater., 1997, vol. 45, pp. 1889–97.
V. Massardier, V. Guétaz, J. Merlin, and M. Soler:Mater. Sci. Eng. A, 2003, vol. A355, pp. 299–310.
V. Massardier, V. Guétaz, J. Merlin, and M. Soler:Mater. Sci. Forum, 2003, vols. 426–432, pp. 1267–72.
F.J. Humphreys:Acta Mater., 1997, vol. 45, pp. 4231–40.
F.J. Humphreys:Acta Mater., 1997, vol. 45, pp. 5031–39.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Capdevila, C., Ferrer, J.P., Caballero, F.G. et al. Influence of processing parameters on the recrystallized microstructure of extra-low-carbon steels. Metall Mater Trans A 37, 2059–2068 (2006). https://doi.org/10.1007/BF02586126
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF02586126