Abstract.
A simple two-dimensional square cavity model is used to study shock attenuating effects of dust suspension in air. The GRP scheme for compressible flows was extended to simulate the fluid dynamics of dilute dust suspensions, employing the conventional two-phase approximation. A planar shock of constant intensity propagated in pure air over flat ground and diffracted into a square cavity filled with a dusty quiescent suspension. Shock intensities were \(M_s=1.30\) and \(M_s=2.032\), dust loading ratios were \(\alpha=1\) and \(\alpha = 5\), and particle diameters were \(d = 1, 10\) and \(50 \){\rm \mu}$m. It was found that the diffraction patterns in the cavity were decisively attenuated by the dust suspension, particularly for the higher loading ratio. The particle size has a pronounced effect on the flow and wave pattern developed inside the cavity. Wall pressure histories were recorded for each of the three cavity walls, showing a clear attenuating effect of the dust suspension.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
Author information
Authors and Affiliations
Additional information
Received 15 November 1999 / Accepted 25 October 2000
Rights and permissions
About this article
Cite this article
Wang, B., Wu, Q., Wang, C. et al. Shock wave diffraction by a square cavity filled with dusty gas. Shock Waves 11, 7–14 (2001). https://doi.org/10.1007/PL00004061
Issue Date:
DOI: https://doi.org/10.1007/PL00004061