Abstract
The effects of various quenching and aging treatments including direct quenching (DQ), up-quenching (UQ), and step-quenching in a water bath at 100 °C (SQWB) and in an oil bath at 100 °C (SQOB) have been studied on two Cu-Zn-Al shape memory alloys (SMA’s) with the aluminum content less than 3.8 wt pct. The structures of two heats at room temperature are parent (alloy A) and martensite phases (alloy B), respectively. It is found that the rapid rate of cooling after solution treatment is an essential requirement for a Cu−Zn−Al SMA with low aluminum content; otherwise, a less rapid rate of cooling during the quenching process causes the precipitation of α phase, which has been observed in SQWB specimens. The temperature of the martensitic transformation (M s ) is found to be increased with both the size of ordering domain and the degree of ordering. Nevertheless, a stable and sound shape memory property has been obtained on specimens of either UQ or SQOB. Furthermore, the periods of isothermal aging required to initiate precipitation of either α or α1 phase have been examined at various temperatures; then the time-temperature-transformation (T-T-T) diagrams are constructed. From the calculation of the activation energy for precipitation of α1, the shape memory life expectancy of alloy B with 3.14 wt pct Al content has been determined to be only 41 days when operating at a temperature as small as 100 °C. For this reason, it is suggested that a suitable operating temperature of Cu-28.2Zn-3.14Al SMA should be less than 80 °C.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
J.D. Stice and C.M. Wayman:Metall. Trans. A, 1982, vol. 13A, pp. 1687–92.
J.M. Cook and L.M. Brown:Scripta Metall., 1978, vol. 12, pp.949–52.
J. Van Humbeeek and L. Delaey:Z. Metalkd., 1984, vol. 75, pp. 755–59.
A. Abu Arab and M. Ahlers:Acta Metall., 1988, vol. 36, pp. 2627–38.
G. Scarsbrook, J.M. Cook, and W.M. Stobbs:Metall. Trans. A, 1984, vol. 15, pp. 1977–86.
D. Segers, J. Van Humbeeck, L. Dorikens-Vanpraet, I. Lemahieu, and M. Dorikens:Scripta Metall., 1988, vol. 22, pp. 521–23.
J. Van Humbeeck, J. Janssen, Mwamba-Ngoie, and L. Delaey:Scripta Metall., 1984, vol. 18, pp. 893–98.
J.B. Qixuan and T.Y. Hsu:Mater. Sci. Eng., 1987, vol. 93, pp. 205–11.
D. Schofield and A.P. Miodownik:Met. Technol., 1980, April, pp. 167–73.
K.N. Melton and O. Mercier:Metall. Trans. A, 1979, vol. 10, pp. 875–79.
S. Kajiwara and T. Kikuchi:Acta Metall., 1982, vol. 30, pp. 589–98.
M. Thumann and E. Hornbogen:Z. Metallkd., 1988, vol. 79, pp. 119–26.
D.P. Dunne and N.F. Kennon:Scripta Metall., 1982, vol. 16, pp. 729–34.
A. Planes, J.L. Maequeron, M. Morin, and G. Guenin:Mater. Sci. Eng., 1981, vol. 50, pp. 53–57.
G. Inden:Z. Metallkde., 1975, vol. 66, pp. 648–56.
J. Janssen, J. Van Humbeeck, M. Chandrasekaran, N. Mwama, and L. Delaey:J. Phys., Paris, Colloq. C4, 1982, vol. 43, pp. 703–08.
H. Warlimont, L. Delaey, R.V. Krishnan, and H. Tas:J. Mater. Sci., 1974, vol. 9, pp. 1545–55.
J.-C. Li and G.S. Ansell:Metall. Trans. A, 1983, vol. 14, pp. 1293–97.
J.S. Lee and C.M. Wayman:Metallography, 1986, vol. 19, pp. 401–19.
Wu Jianxin, Jiang Bohong, and T.Y. Hsu:Acta Metall., 1988, vol. 36, pp. 1521–26.
R. Rapacioli and M. Ahlers:Acta Metall., 1979, vol. 27, pp.777–84.
R. Rapacioli, M. Chandrasekaran, and L. Delaey: inShape Memory Effects in Alloys, J. Perkins, ed., Plenum Press, New York, NY, 1975, pp. 365–711.
J. Dutkiewicz and J. Morgiel:J. Mater. Sci., 1986, vol. 21, pp.429–34.
Y. Nakata, T. Tadaki, and K. Shimizu:Trans. Jpn. Inst. Met., 1989, vol. 30, pp. 107–16. 25. M.H. Wu and C.M. Wayman:Proc. ICOMAT-J986, Jpn. Inst. Met., Nara, Japan, 1986, pp. 619-24.
Author information
Authors and Affiliations
Additional information
formerly Graduate Student, National Tsing Hua University
Rights and permissions
About this article
Cite this article
Leu, S.S., Hu, C.T. The aging effect on Cu−Zn−Al shape memory alloys with low contents of aluminum. Metall Trans A 22, 25–33 (1991). https://doi.org/10.1007/BF03350946
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1007/BF03350946