Abstract
Weld production tests were made using friction stir (FSW) and MIG welding for welding extruded panels. Production times were measured using a 2-m long double-skinned EN-AW 6005A-profile joint as a basic unit. Production time data were used for productivity calculations of different welding machine arrangements. Furthermore, a cost comparison was made based on the production time, machine investment, license, consumable and tooling costs. MIG welding costs were dominated by labour wages and machine investment and by a lesser degree by filler material costs. FSW costs were dominated by machine investment, fabrication license and labour wages. FSW was more economical than MIG when the annual production volume was large enough, in the order of some tens of km of weld per year.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
Thomas, W.M, et al., “Improvements Relating to Friction Welding”. European Patent Specification 0 615 480 (PCT/GB92/02203). The Welding Institute, Cambridge, 27 Nov. 1992.
Midling Ole, T. & Johansen Helge, G., “Production of Wide Aluminium Profiles by Solid-State Friction Stir Welding”. 6th International Conference on Extrusion Technology, ET96, Chicago, May 1996, pp. 373–378.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Mononen, J., Sirén, M. & Hänninen, H. Cost Comparison of FSW and MIG Welded Aluminium Panels. Weld World 47, 32–35 (2003). https://doi.org/10.1007/BF03266406
Published:
Issue Date:
DOI: https://doi.org/10.1007/BF03266406