Abstract
A recently developed processing technique called transient plastic-phase processing (TPPP) is capable of the in-situ net-shape manufacturing of complexly shaped, fully dense, ultrarefractory composites at much lower (homologous) temperatures than those currently used. The viability of this technique as well as its advantages over the traditional processing routes has been demonstrated for the Ti-B-C and Zr-B-C systems. The resulting composites had higher than 99% density and excellent mechanical properties.
Similar content being viewed by others
References
I.I. Spivak et al., “Creep in the Binary System TiB2-TiC and ZrB2-ZrN”, Sov. Powder Metall. Met. Ceram., 137 (1974), pp. 617–620.
H.R. Baumgartner and R.A. Steiger, “Sintering and Properties of Titanium Diboride Made from Powder Synthesized in a Plasma-Arc Heater,” J. Amer. Cer. Soc., 67 (1984), pp. 207–212.
H. Pastor, “Metallic Borides: Preparation of Solid Bodies-Sintering Methods and Properties of Solid Bodies,” Boron Refractory Borides, ed. V.I. Malkovich (New York: Springer Veriag, 1977), pp. 475–493.
C.F. Yen, C.S. Yust, and G.W. Clark, “Enhancement of Mechanical Strength in Hot-Pressed TiB2 Composites by the Addition of Fe and Ni,” Report CONF-781093-2 (Oak Ridge, TN: Oak Ridge National Laboratory, 1978).
W.B. Johnson, T.D. Claar, and G.H. Schiroky, “Preparation and Processing of Platelet-Reinforced Ceramics by the Directed Reaction of Zirconium with Boron Carbide,” Cer. Eng. Sci. Proc., 10 (7-8) (1989), pp. 588–598.
M.W. Barsoum and B. Houng, “Transient Plastic Phase Processing of Titanium-Boron-Carbon Composites,” J. Am. Ceram. Soc., 76 (6) (1993), pp. 1445–1451.
M.W. Barsoum, U.S. patent allowed. To be issued in 1995.
D. Miracle and H. Lipsitt, “Mechanical Properties of Fine-Grained Substoichiometric TiC,” J. Amer. Cer. Soc., 66 (8) (1983), pp. 592–596.
R. Rice and W. McDonough, “Intrinsic Volume Changes of Self-Propagating Synthesis,” J. Am. Ceram. Soc., 68 (5) (1985), pp. C-122–123.
D. Brodkin and M. Barsoum, “Isothermal Section at 1600°C in Ti-B-C System,” submitted for publication.
A.L. Laskar et al., eds., Diffusion in Materials (Amsterdam, the Netherlands: Kluwer Academic Publishers, 1990), p. 441.
Tsungchi Lien, M.Sc. Department of Material Engineering, Drexel University (1993).
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Barsoum, M., Zavaliangos, A., Kalidindi, S.R. et al. The transient plastic phase processing of ceramic-ceramic composites. JOM 47, 52–55 (1995). https://doi.org/10.1007/BF03221311
Issue Date:
DOI: https://doi.org/10.1007/BF03221311