Abstract
Experimental tests were conducted to control the flow around a cylinder by means of unsteady blowing (synthetic jet) through a single slot disposed on the wall of the model. The flow Reynolds number (based on the diameter of the model) wasR D=105. The efficiency of the synthetic jet is quantified in terms of delaying separation and modifying the drag coefficient. The investigations were of three types: measurements of the mean pressure distribution, wall visualizations of the separation line position and measurements of the mean flow-field in the wake.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
Amitay, A., Honohan, A., Trautman, M. and Glezer, A., Modification of the Aerodynamic Characteristics of Bluff Bodies Using Fluidic Actuators, 28th AIAA Fluid Dynamics Conference, 4th AIAA Shear Flow Control Conference, (Snowmass Village, CO), (June 29–July 2 1997).
Béra, J. C., Michard, M., Sunyach, M. and Comte-Bellot, G., Changing Lift and Drag by Jet Oscillation: Experiments on a Circular Cylinder with Turbulent Separation, Eur. J. Mech.-B-Fluids, 19 (2000), 575–595.
Blevins, R. D., The Effect of Sound on Vortex Shedding from Cylinders, Journal of Fluid Mechanics, 161 (1985), 217–237.
Chyu, C. K. and Rockwell, D., Near-wake Structure of an Oscillating Cylinder: Effect of Controlled Shear-layers Vortices, J. of Fluid Mech., Vol. 322 (1966), 21–49.
Huang, X. Y., Feedback Control of Vortex Shedding from a Circular Cylinder, Experiments in Fluids, 20 (1996), 218–224.
Lin, J. C., Towfight, J. and Rockwell, D., Near-wake of a Circular Cylinder Control by Steady and Unsteady Surface Injection, Journal of Fluids and Structures, 9-6, Aug. (1995), 659–669.
McManus, K. R., Joshi, P. B., Legner, H. H. and Davis, S. J., Active Control of Aerodynamic Stall Using Pulsed Jets Actuators, 26th AIAA Fluid Dynamics Conference, (San Diego, CA), (June 19–22, 1995).
Ongoren, A. and Rockwell, D., Flow Structure from an Oscillating Cylinder, Part 2. Mode Competition in the Near Wake, J. of Fluid Mechanics, 191 (1988), 225–245.
Roos, F. W. and Magness, C. L., Bluntness and Blowing for Flow-Field Asymmetry Control on Slender Forebodies, AIAA Applied Aerodynamics Conference, (Monterey, CA), (August 9–11, 1993).
Roos, F. W., Microblowing for High-angle-of-attack Vortex Flow Control on a Fighter Aircraft, 34th Aerospace Sciences Meeting and Exhibit, (Reno, NV), (January 15–18, 1996)
Roos, F. W., Synthetic-Jet Microblowing for Vortex Asymmetry Management on a Hemisphere-Cylinder Forebody, 28th AIAA Fluid Dynamics Conference, 4th AIAA Shear Flow Control Conference, (Snowmass Village, CO), (June 29–July 2, 1997).
Seifert, A., Bachar, T., Koss, D., Shepshelovich, M. and Wygnanski, I., Oscillatory Blowing: A Tool to Delay Boundary-Layer Separation, AIAA Journal, 31–11 (November, 1993).
Smith, D. R., Amitay, M., Kibens, V., Parekh, D. and Glezer, A., Modification of Lifting Body Aerodynamics Using Synthetic Jet Actuators, AIAA 98-0209, (1998).
Tensi, J. and Paillé, F., Visualisation of the Flow around a Cylinder, Using Steady and Unsteady Blowing Techniques, 8th International Symposium on Flow Visualisation, (Sorrento, Italy), (September 1–4, 1998).
Tensi, J. and Paillé, F., Control of the Wake behind a Cylinder, Using Steady and Unsteady Blowing Injectors, International Conference on Optical Technology and Image Processing in Fluid, Thermal and Combustion Flow, (Yokohama, Japan), (December, 1998).
Unal, M. F. and Rockwell, D., On Vortex Formation from a Cylinder. Part 1. The Initial Instability, J. of Fluid Mechanics, 190 (1988), 491–512.
Waka, R., Yoshino, F. and Hayashi, T., Properties of Flow Near a Side-Wall of a Circular Cylinder, Bulletin of JSME, 28-240 (Jun, 1985).
Williams, D. R., Mansy, H. and Amato, C., The Response and Symmetry Properties of a Cylinder Wake Subjected to Localized Surface Excitation, J. of Fluid Mechanics, 234 (1992), 71–96.
Wood, C. J., The Effect of Base Bleed on a Periodic Wave, Journal of Aeronautical Society, 68 (1964), 477–482.
Wood, C. J., Visualisation of an Incompressible Wake with Base Bleed, Journal of Fluid Mechanics, 29, Part 2 (1967), 259–272.
Wygnanski, I., Boundary Layer and Flow Control by Periodic Addition of Momentum (Invited), 4th AIAA Shear Flow Control Conference, Mechanics, 29, Part 2 (1967) (Snowmass Village, CO), (June 29–July 2, 1997).
Zdravkovitch, M. M., Review and Classification of Various Aerodynamic and Hydrodynamic Means for Suppressing Vortex Shedding, Journal of Wind Engineering and Industrial Aerodynamics, 7 (1989), 145–189.
Author information
Authors and Affiliations
Additional information
Jean Tensi: He graduated in Engineering from the ENSMA (Ecole Natianale Swpérieure de Mécanigue et d Aérotechnique, Poitiers, France) in 1970. He is a research engineer in the CNRS (Centre National de la Recherche Scieutifique) where he specializes in aerodynamics and flow control. He works in the wind-tunnels of the LEA (Laboratoire d Etudes Aérodynamiques, Poitiers, France).
Isabelle Boué: She completed her Masters in Mechanical Engineering in 1997. Presently, she is completing her thesis in flow control by means of pneumatic techniques. She has been employed by Dassault-Aviation since August 2001.
François Paillé: He was an elementary teacher till 1988. He entered the ENSMA in 1989 as a technician and is presently an assistant engineer in the LEA. He specialises in metrology and numerical imaging.
Gerard Dury: He was graduated in engineering from the ENSMA in 1991. He took his doctorate at the University of Poitiers (France). He works within the “Société de Valorisation Technologique” VALTTEC. 44 Modification of the Wake behind a Circular Cylinder by Using Synthetic Jets
Rights and permissions
About this article
Cite this article
Tensi, J., Boué, I., Paillé, F. et al. Modification of the wake behind a circular cylinder by using synthetic jets. J Vis 5, 37–44 (2002). https://doi.org/10.1007/BF03182601
Received:
Revised:
Issue Date:
DOI: https://doi.org/10.1007/BF03182601