Abstract
In the present study, incremental forming of Mg alloy sheet at elevated temperatures was attempted with local heating apparatus. The device is composed of several halogen lamps and designed to move with forming tool for local heating in deformation zone. In order to investigate the influences of process parameters to incremental formability of AZ31 alloy sheet, a series of incremental forming tests of AZ31 for cone and pyramid type of simple models were carried out under various process conditions. Experiments were performed under various temperatures, feeding depth per cycle and inclination angles and the results were analysed.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
H. Iseki, T. Naganawa, Vertical wall surface forming of rectangular shell using multistage incremental forming with spherical and cylindrical rollers, J.Mater. Process. Technol. 130–131 (2002) 675–679.
G. Amgrogio, I. Costantino, L. De Napoli, L. Filice, L. Fratini, M. Muzzupappa, Influence of some relevant process parameters on the dimensional accuracy in incremental investigation, J. Mater. Process. Technol. 153–154 (2004) 501–507.
H. Iseki, An approximate deformation analysis and FEM analysis for the incremental bulging of sheet metal using a spherical roller,J. Mater. Process. Technol. 111 (2001) 150–154.
M. S. Shim, J. J. Park, The formability of aluminum sheet in incremental forming,J. Mater. Process. Technol. 113 (2001) 654–658.
J. Kopac, Z. Kampus, Incremental sheet metal forming on CNC milling machine-tool,J. Mater. Process. Technol. 162–163 (2005) 622–628.
Y. H. Kim, J. J. Park, Effect of process parameters on formability in incremental forming of sheet metal,J. Mater. Process. Technol. 130–131 (2002) 42–46.
E. Ceretti, C. Giardini, Aldo Attanasio, Experimental and simulative results in sheet incremental forming on CNC machines,J. Mater Process. Technol. 152 (2004) 176–184.
J. J. Park, Y. H. Kim, Fundamental studies on the incremental sheet metal forming technique,J. Mater. Process. Technol. 140 (2003) 447–453.
T. J. Kim, D. Y. Yang, Improvement of formability for the incremental sheet metal forming process,Int. J. Mech. Sci. 42 (2000) 127–1286.
K. Dai, Z. R. Wang, Y. Fang, CNC incremental sheet forming of an axially symmetric specimen and the locus of optimization,J. Mater. Process. Technol. 102 (2000) 164–167.
G. Ambrogio, L. De Napoli, L. Filice, F. Gagliardi, M. Muzzupappa, Application of incremental orming process for high customised medical product manufacturing,J. Mater Process. Technol. 162–163 (2005) 156–162.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Kim, S.W., Lee, Y.S., Kang, S.H. et al. Incremental forming of Mg alloy sheet at elevated temperatures. J Mech Sci Technol 21, 1518–1522 (2007). https://doi.org/10.1007/BF03177368
Received:
Revised:
Issue Date:
DOI: https://doi.org/10.1007/BF03177368